Modders - Please make me this Mod

[thewomenfolk]

Modders,

I have a great variety of ecigs, from the little Joye 510 all the way up to the Super T and PureSmoker models, with a bunch of box mods and eGo's in between.

But I think I now know what my dream mod would be.

I use my Little Sister from Ken's Box mods, with a 306 LR atty every day, because the size is perfect and the vape is unbelievable. My LS looks like a Bic lighter and is the absolute perfect size for the hand. The atty is so short it hardly sticks out of the top at all, exactly one inch to be exactly. Vaping with parallel 10440 batteries and the 306 atty gets me as close to 6 volts as I'll ever want to get. The batteries are cheap, non-proprietary, and last forever and charge up in 30 minutes or less. So here's what I want:

I want a metal Mod with the shape and size exactly like the Little Sister. And I'd like the button to be mechanical if that's possible...I'd rather not have any electrical parts in it. The thing I like about my all-mechanical mods is that they are virtually indestructable and use non-proprietary batteries. The worst thing I could do to one is loose it. If somebody would make a reasonably priced Mod like I want I'd buy at least one of every color in the spectrum. Seriously.

I know the juice reservoirs are the new thing to put in or on Mods, but they're not important to me. I love dripping.

What do you modders think?

 

[yoyoma_mda]

someone mentioned that they were looking to make a metal housing for the little sister, I for one would love that!

 

[thewomenfolk]

Bump....considering how small cigs are....do modders just want to make big mods?

 

[Gummy Bear]

Bump....considering how small cigs are....do modders just want to make big mods?

2 cents worth: (or just a bit of rambling).

first, I have all but forgotten what a cig is, (8 months ago now) but just in case, I don't want to vape anything now that will remind me. I picked up a titan battery the other day and was instantly reminded of a cig in my hand.

second, It could be just a guy thing,,, you know bigger is better.

but for me I wanted to make a mod that would out perform those dinky little stock titans so 3.7 volts just doesn't cut it for me anymore. Higher voltage does need to be bigger to house the electronics. Then there is the battery thingy, I hated changing 10 batteries a day when a larger batt would go most of the day.

next came the 5 ml Gummy tank so I don't have to refill more than one time per day. so yes by the time I got through improving on all aspects of those little dinks that reminded me of a cig it did get rather large.

 

[thewomenfolk]

-----

I don't like ecigs that remind me of cigarettes either! And I also like 6V vaping, but since I found the 306 LR atty, I see no more need to stack batteries. The 306 LR atty gives me a vape much like 6 Volts on any 3.7 ecig. I have all shapes and sizes of ecigs but the Little Sister shape (like a Bic lighter) works out perfectly for me, just the right size to fit in my hand.

I'd love to have one made of metal and all mechanical, and a bottom button would be fine if it had to be there.

-----

 

[Gummy Bear]

I have (had) carried a silver Bic lighter case for 20 years but no longer need it. I have thought about modding it. I'd bet you could still find them at the flee markets.

 

[Bootsand]

I was thinking about picking up a little sister and there was one in the classifieds that I *almost* jumped on. I'm kind of kicking myself for not picking it up now

 

[Para]

If somebody would make a reasonably priced Mod like I want I'd buy at least one of every color in the spectrum.

Perhaps, if you define "reasonably priced" you'd get more responses. Problem is some folks want the sun and the moon for next to nothing so modders don't respond. If you are willing to pay for custom work I'm sure there are talented folks here who would make what you want.

 

[thewomenfolk]

Reasonably priced would be free. LOL No, but I'd pay a hundred or $150 for a very beautifully machined all-mechanical stainless steel Little Sister.

By 'reasonably priced' I just mean not over-priced. I think $250 or $300 is over-priced for any current Mod.

 

[Gummy Bear]

Reasonably priced would be free. LOL No, but I'd pay a hundred or $150 for a very beautifully machined all-mechanical stainless steel Little Sister.

By 'reasonably priced' I just mean not over-priced. I think $250 or $300 is over-priced for any current Mod.

That sounds reasonable. I thought you were going to say something like $50 bucks.