MONKEYBoxx-The Wooder Man
- Thread starter TomB
- Start date
- th_trl_thread_readers 0
- Status
I get about the same vapor temp from both lawnman, I only use LR510's now because 306's were too hot for me on my reo's and phids. I never have used anything other than 510's on the monkey though and I think its a pretty close comparison in vapor temp between the two (just my opinion though) the only difference in performance between them is the feed system, the finish, and the use of magnets vs. no magnets.
Disclaimer: Again this is only my opinion!! lol
EDIT: AG beat me to it, I need to learn to "refresh" the thread more often
The temp can be regulated depending on what type of atty you use. An LR 306 is going to run extremely hot and so will a 510. If you use just a standard atty you'll find that it runs much cooler. Lots of Vapers love the Phidias precisely because of the hotter vape. With the VV Monkey Boxx you can adjust the temp by altering the voltage and finding just the right sweet spot for yourself.
I think he was referring to the atty getting hot...for some reason the Phid atty doesn't cool down as fast when chain vaping.
It's not hot, it's hawwwt!
Seriously, some of the really suble flavors, like popcorn, and buttered pecan, I use a standard atty. I don't know about VV. I have no electrical savvy at all, except not to grab hold of something I can't let go of.
Seriously, some of the really suble flavors, like popcorn, and buttered pecan, I use a standard atty. I don't know about VV. I have no electrical savvy at all, except not to grab hold of something I can't let go of.
MONKEYBoxx™ and MonkeyBoxxVvolt™- Bottom Feed Juice Boxes
Updated Price reflects use of stainless steel push buttons standard
Hello everybody,
I am exited to sell these little boxes. I love the exotic hardwoods. I used to make a lot of hardwood pens on a lathe with multiple inlays with segments etc. The wood is so amazing with the grains and the patterns/colors. You never have to stain this stuff-clear finish only. I found a way to further enjoy myself further by making these boxes with the nice woods. I intend to only take as many orders in a week as I am comfortable able to handle ( I think up to twenty). I will do everything in my power to complete your mod within fourteen days, but sometimes it may take me 2 or three additional days.
Tom B
Standard MONKEYBoxx™ Model Shown here
Variable Voltage Model Shown Here
MONKEYBoxx™ PRODUCT FEATURES!
Price Now Includes Your Choice of Custom Laser Engraving
* Juice Bottle Size - 6-mL
* Batteries for standard MonkeyBoxx™ -
Choice 1 -One AW Brand Protected 18650 lithium-ion cell (69mm length,2900mAh, 3.7 volts).
Choice 2- For 6 volt operation -Two 3.7 volt protected lithium-ion cells (2X). NOTE: 74mm maximum length. BATTERIES NOT INCLUDED
* Batteries for MonkeyBoxxVvolt™ (recommended) - Two AW Brand Protected ICR123 batteries (2X) BATTERIES NOT INCLUDED
* Atomizer Connection - Joye(R) 510 atomizer (recommended) or cartomizer (not recommended). ATOMIZER/CARTOMIZER NOT INCLUDED
* Wood Finish - Clear lacquer
*TWO FREE 6-mL JUICE BOTTLE ASSEMBLIES (bottom feeding)
* Side Power Cut-Off, safety switch with flush actuator (disables unit for purse/pocket storage). UNIT WILL NOT ACCIDENTALLY TRIGGER
* Acrylic Catch Cup
* Stainless Steel Button Firing Switch- factory sealed
* Sealed Juice Feed System
* Silver Soldered
* Solid Copper Conductors
MONKEYBoxxVvolt™ Variable Voltage Model - Special FEATURES!
Features as above PLUS:
*Variable Voltage Regulator - utilizes discrete switching technology (up to 98% efficient)
You adjust the best voltage for your particular atomizer between 0 and 7.2 volts
You can set it and forget it! It maintains the constant voltage level you select.
Built-In Red LED Voltage Meter
Indicates your current voltage reading that updates once every second
Includes your choice of wood! SEE THE WOODS HERE
Hover your arrow over the pictures in the link to see the names!
PLEASE specify your custom combination of wood types for the following parts:
1. BODY (main housing for the battery and bottle) Select from These
2. SIDES (small parts on each end-one side holds the catch cup) Select from These
3. INLAY your choice as shown HERE (may be deleted at
customer request i.e. no inlay)Hover your arrow over the pictures in the link to see the names!
4. ENGRAVING (If your preference for artwork is not provided/specified/deleted > your order shall receive the MONKEYBoxx™ Logo) (Please attach your artwork file to your email. must be greater than 300x400 pixels and the art must be easily visible when reduced to 1.5" by 1.5" inches)
WOOD Selections available: Curly Maple (white with curly highlights), Bubinga (light pinky orange with wavy grain), Cocobolo (Red-brown with streaks and mottles), Canary (yellow shades - like the bird), King Wood (purple brown with darker lines), and Purpleheart (is actually purple)
Each unit is built by hand. Only the finest hardwoods are selected and the greatest is care taken during manufacture of each and every unit. Due to our exacting specifications and caring craftsmanship we can process a maximum of 20 orders per week. If orders should exceed our capacity, you will be added to our customer list and processing may be delayed. We will update you with the status of your PERSONALIZED order throughout the process. Thanks for your understanding!
PRICE:
$120.00 WITH FREE SHIPPING! (USA) For Variable Voltage Model add $85.00
$132.00 WITH FREE SHIPPING! (WORLD-WIDE) Variable Voltage Model add $85.00
We use USPS PRIORITY MAIL for FAST DELIVERY! Normally 2-3 days! (USA)
HOW TO ORDER YOUR MONKEYBoxx™:
Please submit your order with (complete selections 1-4) to Fatlogs-orders (at) yahoo (dot) com and I will send you a paypal invoice.
Updated Price reflects use of stainless steel push buttons standard
Hello everybody,
I am exited to sell these little boxes. I love the exotic hardwoods. I used to make a lot of hardwood pens on a lathe with multiple inlays with segments etc. The wood is so amazing with the grains and the patterns/colors. You never have to stain this stuff-clear finish only. I found a way to further enjoy myself further by making these boxes with the nice woods. I intend to only take as many orders in a week as I am comfortable able to handle ( I think up to twenty). I will do everything in my power to complete your mod within fourteen days, but sometimes it may take me 2 or three additional days.
Tom B
Standard MONKEYBoxx™ Model Shown here
Variable Voltage Model Shown Here
MONKEYBoxx™ PRODUCT FEATURES!
Price Now Includes Your Choice of Custom Laser Engraving
* Juice Bottle Size - 6-mL
* Batteries for standard MonkeyBoxx™ -
Choice 1 -One AW Brand Protected 18650 lithium-ion cell (69mm length,2900mAh, 3.7 volts).
Choice 2- For 6 volt operation -Two 3.7 volt protected lithium-ion cells (2X). NOTE: 74mm maximum length. BATTERIES NOT INCLUDED
* Batteries for MonkeyBoxxVvolt™ (recommended) - Two AW Brand Protected ICR123 batteries (2X) BATTERIES NOT INCLUDED
* Atomizer Connection - Joye(R) 510 atomizer (recommended) or cartomizer (not recommended). ATOMIZER/CARTOMIZER NOT INCLUDED
* Wood Finish - Clear lacquer
*TWO FREE 6-mL JUICE BOTTLE ASSEMBLIES (bottom feeding)
* Side Power Cut-Off, safety switch with flush actuator (disables unit for purse/pocket storage). UNIT WILL NOT ACCIDENTALLY TRIGGER
* Acrylic Catch Cup
* Stainless Steel Button Firing Switch- factory sealed
* Sealed Juice Feed System
* Silver Soldered
* Solid Copper Conductors
MONKEYBoxxVvolt™ Variable Voltage Model - Special FEATURES!
Features as above PLUS:
*Variable Voltage Regulator - utilizes discrete switching technology (up to 98% efficient)
You adjust the best voltage for your particular atomizer between 0 and 7.2 volts
You can set it and forget it! It maintains the constant voltage level you select.
Built-In Red LED Voltage Meter
Indicates your current voltage reading that updates once every second
Includes your choice of wood! SEE THE WOODS HERE
Hover your arrow over the pictures in the link to see the names!
PLEASE specify your custom combination of wood types for the following parts:
1. BODY (main housing for the battery and bottle) Select from These
2. SIDES (small parts on each end-one side holds the catch cup) Select from These
3. INLAY your choice as shown HERE (may be deleted at
customer request i.e. no inlay)Hover your arrow over the pictures in the link to see the names!
4. ENGRAVING (If your preference for artwork is not provided/specified/deleted > your order shall receive the MONKEYBoxx™ Logo) (Please attach your artwork file to your email. must be greater than 300x400 pixels and the art must be easily visible when reduced to 1.5" by 1.5" inches)
WOOD Selections available: Curly Maple (white with curly highlights), Bubinga (light pinky orange with wavy grain), Cocobolo (Red-brown with streaks and mottles), Canary (yellow shades - like the bird), King Wood (purple brown with darker lines), and Purpleheart (is actually purple)
Each unit is built by hand. Only the finest hardwoods are selected and the greatest is care taken during manufacture of each and every unit. Due to our exacting specifications and caring craftsmanship we can process a maximum of 20 orders per week. If orders should exceed our capacity, you will be added to our customer list and processing may be delayed. We will update you with the status of your PERSONALIZED order throughout the process. Thanks for your understanding!
PRICE:
$120.00 WITH FREE SHIPPING! (USA) For Variable Voltage Model add $85.00
$132.00 WITH FREE SHIPPING! (WORLD-WIDE) Variable Voltage Model add $85.00
We use USPS PRIORITY MAIL for FAST DELIVERY! Normally 2-3 days! (USA)
HOW TO ORDER YOUR MONKEYBoxx™:
Please submit your order with (complete selections 1-4) to Fatlogs-orders (at) yahoo (dot) com and I will send you a paypal invoice.
The MB is similar to a Reo...uses a catchcup.
The Phidias is gravity feed or fire/feed.
It's not hot, it's hawwwt!
Seriously, some of the really suble flavors, like popcorn, and buttered pecan, I use a standard atty. I don't know about VV. I have no electrical savvy at all, except not to grab hold of something I can't let go of.
That means you probably don't want a monkeyboxx, cuz you won't be able to let go of it once you get your hands on it!!! lol
one method of feeding it yes,
there ia also the fire-feed method though that it barely has to get close to horizontal before it'll feed however it is dependent too on the amount of juice in the bottle
You can turn it upside down and drip into the bottom of the atty, or tilt it up as you fire and draw.
I like the Phidias and Monkeyboxx both...they are both quality.
I'm sorry I don't but I have a picture of the wood selections in the order page below.
Is the MB the only feed system into the perimeter of the catch cup vs center
I'm not sure exactly what this means but theres a war /action movie on next to me with tons of shooting and qaulity kills,and im still HERE,lol
I think the posting flurry may be over for a few...feel free to go take a leak or get something to drink...LOL
There is another one I hear, forget which. I'm not gonna do it in the cup way any more though. I use both and prefer how the middle way wets that atty right away.
- Status
Similar threads
- Locked
