more throat hit? help?!?!
- Thread starter QusieQ
- Start date
- th_trl_thread_readers 0
- Status
WOW 80 pg and 24nic honestly i think your only hope would be to see if the vendor carries it in 30mg nic. The two composites of throat are heat and nic. Pg is the has a bit to do with it as well. Some flavors just dont carry throat and not much you can do bout it. Sorry
I think ur right either up the nic next order if I can or enjoy the flavor as is 
You could try adding a few drops of PGA, high octane vodka or rum.
You might even want to try some spiced rum.
I would start out with 2 or 3 drops per 5ml and increase as is necessary.
Good luck!
Pete
You might even want to try some spiced rum.
I would start out with 2 or 3 drops per 5ml and increase as is necessary.
Good luck!
Pete
Many vendors, even if they don't offer it higher than 24, if you ask them, they'll make it for you.
When I first started I wanted a high nic juice for those times when I had serious cravings and vapor bomb made a 30 mg. juice for me.
When I first started I wanted a high nic juice for those times when I had serious cravings and vapor bomb made a 30 mg. juice for me.
...with 80%PG and 24mg nic, you should be getting pretty good throat hit already so, I gotta ask...what PV are you using...PG and nic level are directly related to TH and both of yours are already pretty high, if you are using a ciggy sized unit, you may need to move upto a Riva/Kgo or E-Power and add some LR attys/cartos or get a variable or higher voltage device............
madjack
madjack
...with 80%PG and 24mg nic, you should be getting pretty good throat hit already so, I gotta ask...what PV are you using...PG and nic level are directly related to TH and both of yours are already pretty high, if you are using a ciggy sized unit, you may need to move upto a Riva/Kgo or E-Power and add some LR attys/cartos or get a variable or higher voltage device............
madjack
Currently I am using a 2.8-3 oHM fluxomizer, with a (510) 320 mAH batt. I plan to get a better device soon, just waiting for the holidays to pass before I spend moolah on myself
Last edited:
Something like a KGO that's 4.2 volts with a low resistance cartomizer will definitely help.
Fluxomizers tend to mute flavors anyway.
Vapor Station has higher nic juice but a higher volt battery with LR cartos would probably do the trick.
https://vaporstation.com/index.php/e-liquids/vs-brand.html
Maybe even a pass-through with some LR cartos.
Fluxomizers tend to mute flavors anyway.
Vapor Station has higher nic juice but a higher volt battery with LR cartos would probably do the trick.
https://vaporstation.com/index.php/e-liquids/vs-brand.html
Maybe even a pass-through with some LR cartos.
This is the only 2.5 carto I could find. You could probably use this on your 510 and get a good vape.
IKV Gold 510 Cartomizer - IkenVape Store
IKV Gold 510 Cartomizer - IkenVape Store
...as quick as you are able, get your hands on something like the Kgo or the E-Power and some 1.7ohm Resurrectors...all by themselves, they will rock your world compared to what you are using right now...believe me, as a po' boy myself, I understand the money deal BUT, when you can, upgrade your gear and be amazed............
madjack
madjack
...as quick as you are able, get your hands on something like the Kgo or the E-Power and some 1.7ohm Resurrectors...all by themselves, they will rock your world compared to what you are using right now...believe me, as a po' boy myself, I understand the money deal BUT, when you can, upgrade your gear and be amazed............
madjack
thanks!! I will look into this for sure.
...as quick as you are able, get your hands on something like the Kgo or the E-Power and some 1.7ohm Resurrectors...all by themselves, they will rock your world compared to what you are using right now...believe me, as a po' boy myself, I understand the money deal BUT, when you can, upgrade your gear and be amazed............
madjack
Well, I did an internet search for a KGO ... and I bought one!! I also purchased 1.5 ohm cartomizers. I have never used a carto, so we will see how it goes. Now i'm so excited to know I might get a better hit, I like what I've been using but to know I can do better ...woohoo!!
your setup will change the throat hit. 1.5ohm cartos are maybe on the low side but will still work and you will get the desired effect.
just remember to fill the cartomizer until you get a drop out from the bottom, before you start using it. you can drip straight into the filler (thats what i do).
itll be fun to see what you think of your new unit
just remember to fill the cartomizer until you get a drop out from the bottom, before you start using it. you can drip straight into the filler (thats what i do).
itll be fun to see what you think of your new unit
You can buy throat hit plus on a site- I do not have the link but if you google those three words it will come up.
your setup will change the throat hit. 1.5ohm cartos are maybe on the low side but will still work and you will get the desired effect.
just remember to fill the cartomizer until you get a drop out from the bottom, before you start using it. you can drip straight into the filler (thats what i do).
itll be fun to see what you think of your new unit
I gotta be honest this whole ohm thingy confused me. I've had it explained to me more than once and still get confused. May I ask what you mean by low (at 1.5 ohm)? Is a higher ohm, hotter producing more TH? Or do you get more throat his from the lower the ohm? And what do dual coils do for TH? And what the heck is LR all about??
Ugh ....
Last edited:
To answer your question easily, using the same device, a lower ohm (LR) atomizer or cartomizer, makes for greater watts-and therefore a hotter and bigger throat hit. One tradeoff is that LR atomizers/cartomizers IMO make flavor less. Dual coils, for me, do well on flavor-and they make for more vapor (2 coils gives greater surface area to vaporize). For dual coils, the same concept applys-the lower the ohm number, the hotter and bigger the throat hit.
So 1.5 dual cartos are ideal? If I wanted hotter I would use 1.25 dual coil, and if I wanted to cool it down maybe a single coil 2.0??
Last edited:
if you are going to use 1.25ohm cartos, you better have a unit that can support that. a 510 pen style or ego/rivas wont hold up to it.
if i were you, i wouldnt go lower than 2.0ohm which is considered low resistance (LR).
the higher the ohm on the carto, the more volts you need on your pv.
2 ohm are good for units that crank out anywhere from 3.3 ohms to 4volts (ego, riva, 510 etc etc).
3 ohm cartos are perfect for 5 volts and above (variable voltage and any other 5+volt device).
GENERALLY, you could say that the lower the ohm, the more vapor and throat hit, for ex.... if i use a 3.0 ohm carto on my 3.7v device, you get very little vapor and throat hit.
if i use a 2.0ohm carto on a 3.7v device, i get awesome vapor and throat hit.
i hope i didnt confuse you more? lol
- Status
