- Status
They're gonna perform pretty similarly. The evod is gonna have a slightly tighter draw in my experience. Issues being gurgling, flooding? Perhaps at about half to 3/4 empty?
i havent had any issues yet. what problems r u having?
I'm having some issues with the Evod, dose someone have a preferances?
Most of what I've read says the Evod has fewer leaking problems than the T3.
Is the atomizer head piece is screwed on tight?
I've read it can cause leaks if it isn't.
No leaking with mine at all, fortunately.
Is the atomizer head piece is screwed on tight?
I've read it can cause leaks if it isn't.
No leaking with mine at all, fortunately.
My Kanger T-3 is a very cool, tasteless vape (it is tasteless when I don't taste plastic that is...) I just got it this week so it is new but I have ran several tanks through it and I'm not a fan.
My Evods I love! I just finished self-coiling one. I have had no leaking problems with the system. However I find if you let the level in the tank get too low, or if you draw too hard it will drop fluid down on the center post. So control your draw, and refill when you see you are getting close to the silica cap in the tank that fits over the coils. I have two of these, I use them 90% of the time because they are easy to carry around while I work. I just make sure to wipe out condensation in the driptip and check the center post for liquid if I'm having any problems or it seems to be getting too warm. (I chain vape lol)
I use these on an eGo passthrough and my Vamo (with a connector).
Everyone has different tastes but I hope that helps
My Evods I love! I just finished self-coiling one. I have had no leaking problems with the system. However I find if you let the level in the tank get too low, or if you draw too hard it will drop fluid down on the center post. So control your draw, and refill when you see you are getting close to the silica cap in the tank that fits over the coils. I have two of these, I use them 90% of the time because they are easy to carry around while I work. I just make sure to wipe out condensation in the driptip and check the center post for liquid if I'm having any problems or it seems to be getting too warm. (I chain vape lol)
I use these on an eGo passthrough and my Vamo (with a connector).
Everyone has different tastes but I hope that helps
This
Love my EVODs... maybe you can explain your issues?
My t3s were nothing but headaches. Nice when they weren't gurgling.
Adjusting the amount of wicking helps according to type of liquid being used. It's thinness or thickness. With the standard silica wick I removed 1 flavor wick for bobas. I actually added one 1mm piece for jc red oak domestic. Very thin for vg.
Make sure you have the head in tight and the only issues you should have is when the tank is almost empty.
Of everything I've tried they're one of the most hassle free delivery systems. Really easy to rebuild and really cheap if you choose not to.
Last edited:
Really liking the evod... takes about on tankful for a new head to taste right, but after that works really well for days of chain-vaping. The only thing I did (personnel preference) was to cover one of the three vent holes with a tiny piece of scotch tape, for a slightly tighter draw.
Just rebuilt one of the heads (2.5m silica - 32awg kanthal) It WAS easier than a nova head and takes 2/3 less wick.
Still use Novas regularly but these evods are quite impressive.
Don
Just rebuilt one of the heads (2.5m silica - 32awg kanthal) It WAS easier than a nova head and takes 2/3 less wick.
Still use Novas regularly but these evods are quite impressive.
Don
I like the eVod so much I bought 12 tanks and rotate flavors all day, I have removed one flavor wick for heavier fluids and added one for light ones. Not having any issues, they don't need cleaning every refill and they don't leak. They LOVE 3.7 volts, which the Kanger Battery is stock and the Joyetech eGo upgrade is set on high variable voltage, (the yellow light).
The airy draw gets better after they are broke in, and I look forward to building my own coils...if anyone has a link to a good thread about this, or youtube video, I would appreciate it very much, have read a couple, but I like to learn as much as I can before I charge in.....have the basics down but enjoy reading other peoples experiences.
I also have the ProTank, also very good, a little lighter on the draw than eVod but modding the airflow brought it right to the eVod level and it vapes much heavier than the eVod once the airflow is adjusted.
These are both good products and much better than the MT3's, which I spend alot of time rewicking and degurgling, and in general fiddling around with to get them to perform like an eVod. I have a couple MT3's that somehow I got right and they are awesome when they work as they should.
The airy draw gets better after they are broke in, and I look forward to building my own coils...if anyone has a link to a good thread about this, or youtube video, I would appreciate it very much, have read a couple, but I like to learn as much as I can before I charge in.....have the basics down but enjoy reading other peoples experiences.
I also have the ProTank, also very good, a little lighter on the draw than eVod but modding the airflow brought it right to the eVod level and it vapes much heavier than the eVod once the airflow is adjusted.
These are both good products and much better than the MT3's, which I spend alot of time rewicking and degurgling, and in general fiddling around with to get them to perform like an eVod. I have a couple MT3's that somehow I got right and they are awesome when they work as they should.
Last edited:
- Status
Similar threads
