Mvp2 owners

[Caffeine7]

I've had my MVP 2 for about 3 months now and the 510 connector threads don't hold tanks well anymore. I never over tightened anything and used either the beauty ring that came with it or an ego cone to take up slack and stabilize the tank. They don't look stripped but it looks like the connector expanded just enough to keep the threads from gripping. I used some needle nose pliers with a tank threaded in to squeeze it down a bit and that worked and ordered a smok tech 510 airflow controller so I don't have to use the mod threads. Has anyone else have this happen? It dosent seem right to have to do this with a device I just bought last October

 

[Btsmokincat]

Bought mine in early November, I haven't had any issues with the 510 threads. I do have to tease the pin up to make good contact for some tanks.

Where did you buy your MVP2? I got mine from 101vapes. I wonder if you got one from a bad batch...

 

[Caffeine7]

I got that one from a local b&m but when 101 had their deal I got a backup I'm using now. As soon as the airflow controllers show up I'm installing them in both

 

[Btsmokincat]

I'll definitely keep an eye on it! Thanks for the heads up! Air flow controller is now on my list of must haves!

 

[brevity]

Can't say I've had any of the issues you've mentioned. I do notice a little button rattle on the VV/VW display but that's about it. Do you routinely switch delivery devices throughout the day? I don't switch mine out very often...

 

[Rancor0681]

Do you chain vape to the point it heats up at the connection point?

 

[JustMe2]

Can you post a picture of it..I'm looking at mine and can't see how it would open up?..Its solid all the way around it.

 

[Caffeine7]

It's not visible so I thought it was my carto tank setup so I switched to another tank and it was the same. As far as I can tell its from the tanks rocking in my pocket or in the cup holder while driving. I do switch tanks a few times during the day. It's funny how 30 years of cigs and I smoked pretty much the same flavor day in and day out but now I need different vapes throughout the day but I digress. I wonder if they use a soft metal for the 510 contact. I've read that the connector is an issue on the VTR also.

 

[Caffeine7]

I should add, I chain vape sometimes but stop when things get warm to the touch and it's usually a top coil. I've been using cartos and i30s the most recently

 

[Pocha]

I've had mine since November and I use it exclusively. I haven't had this problem but I only change my tanks once or twice a day usually.

 

[PellyCanFly]

Did you ever come up with a solution for this? My MVP 2 inner threads no longer hold my Kayfun. One place online sells an adapter, just spoke to them and they said they cannot find em right now.