Need help with an atomizer issue/question. Probably requires someone well versed in coil-less atomizers.

[Jamell]

I started using an atomizer with no wick, they store called it a "Wickless atomizer" Here's my problem, I don't know if that's the correct term or name for an atomizer no wick, could someone tell me what an atomizer without a wick is really called? Also, once I find what they're called, I want a "wickless atomizer" with a high ohm resistance, nothing too special, but 3.6-4.0 would be perfect for my modkit, I like to vape at 6 volts 10 watts. If anyone can provide me with the correct name for an atomizer that uses no wick, and a website where I can buy the wickless atomizers with higher resistances than 2.8, please link me a website. Also, I know the higher the resistance of the atomizer, the longer the life span on it, but since a higher resistance atomizer allows you to vape at 6 volts 10 watts, does that also mean it will produce more vapor and more flavor? Thanks to everyone than can help me with this issue
I have a Cigstar Imotion V+3 VV/ VW/OHM Meter Aero tank with airflor control.

Thanks to everyone who can help me.

 

[MrPlink]

You (and the shop) are probably referring to a bottom coil clearomizer.

When these started becoming all the rage people called them wickless because compared to the popular ViviNovas of yore, you could not see exposed wicks.

Well as you might have guessed by reading this far, they actually aren't wickless, you just cant see the wicks, but trust me they are there.

Side note:
It is plausible to configure certain rebuildable dripping atomizers as a true wickless atty which actually perform rather well, but they really suffer in the utility dept.
Supposedly there is a German company making an atty designed to be wickless from the get go, but I couldn't tell you anymore than that.

3.6+ohm on a clearo may be a tall order.
That is pretty high. You could easily hit 10w by using a lower ohm coil and dropping your voltage.

Not to mention most clearos will fry juice with 6v

 

[BigCatDaddy]

I've used these before, quite nice little dripping attys. Not the Ω's you are seeking but they do vape nice!!

KP Long Barrel Sealed Atomizer - Kidney Puncher

 

[epicdoom]

are you taking about the CE4 type Wickless atomizer I'm not sure they come in that high a resistance. You could buy a re buildable atomizer do some research watch some videos and build a coil you desire for the atomizer.

 

[Bunnykiller]

what you are thinking of is a 510 atomizer, looks just like a blu cartridge without the end piece... its just a coil with a small metal "tent" in a "hollow" tube with a 510 male connect thread... btw its a dripper.. I have 2 of them and really like them, good clean flavor. Mine are at 2.8 ohms. I dont understand why you want 4 ohms... you can use the 2.8 at a lower voltage to get the 10 watts you want

 

[emily n portland]

madvapes has the 4Ω 510 atomizers

(never used them)

 

[Jamell]

what you are thinking of is a 510 atomizer, looks just like a blu cartridge without the end piece... its just a coil with a small metal "tent" in a "hollow" tube with a 510 male connect thread... btw its a dripper.. I have 2 of them and really like them, good clean flavor. Mine are at 2.8 ohms. I dont understand why you want 4 ohms... you can use the 2.8 at a lower voltage to get the 10 watts you want

You seem to be on point! Yes, my connector is a 510 thread, but I have an aerotank with controllable airflow, the only problem is that it comes with a 1.8 ohm atomizer, could you or anyone point me to a website that sells the atomizer you just mentioned, but instead of 1.8 ohms maybe like 2.3 max? I read it doesn't need to be as high as 4.0 for these kings of tanks, 2.0 or 2.3 is a perfect resistance, it definitely isn't a like a blu cartridge though. The aero tank is a 4 ml capacity tank, controllable airflow with that hollow tub, you fill the tank upside down, and screw it in like that too. I will attach a picture.

 

[edyle]

I started using an atomizer with no wick, they store called it a "Wickless atomizer" Here's my problem, I don't know if that's the correct term or name for an atomizer no wick, could someone tell me what an atomizer without a wick is really called? Also, once I find what they're called, I want a "wickless atomizer" with a high ohm resistance, nothing too special, but 3.6-4.0 would be perfect for my modkit, I like to vape at 6 volts 10 watts. If anyone can provide me with the correct name for an atomizer that uses no wick, and a website where I can buy the wickless atomizers with higher resistances than 2.8, please link me a website. Also, I know the higher the resistance of the atomizer, the longer the life span on it, but since a higher resistance atomizer allows you to vape at 6 volts 10 watts, does that also mean it will produce more vapor and more flavor? Thanks to everyone than can help me with this issue
I have a Cigstar Imotion V+3 VV/ VW/OHM Meter Aero tank with airflor control.

Thanks to everyone who can help me.

I'm confused whether you are using a "Wick less atomizer" or an Aerotank with airflow control,
or whether you are calling the Aerotank a wickless atomizer.

 

[The Ocelot]

I was thinking of de-wicked/de-bridged attys. There's a little info about them in here, but it may not answer your questions.

Drip, Drip, Drip…

 

[The Ocelot]

You seem to be on point! Yes, my connector is a 510 thread, but I have an aerotank with controllable airflow, the only problem is that it comes with a 1.8 ohm atomizer, could you or anyone point me to a website that sells the atomizer you just mentioned, but instead of 1.8 ohms maybe like 2.3 max? I read it doesn't need to be as high as 4.0 for these kings of tanks, 2.0 or 2.3 is a perfect resistance, it definitely isn't a like a blu cartridge though. The aero tank is a 4 ml capacity tank, controllable airflow with that hollow tub, you fill the tank upside down, and screw it in like that too. I will attach a picture.

An Aero Tank uses a dual coil atomizer. A 1.8Ω dual coil isn't the same as a 1.8Ω single coil. I'm not sure you can get Aero Tank coils higher than 2.0Ω, although I could be wrong. Kanger ProTank 3 & Aerotank - Dual Coils - 5 Pack 2.0ohms

 

[edyle]

A 1.8 ohm dual coil contains 2 3.6 ohm coils inside it.

At 6 volts, it will vape at 6x6/1.8= 20 watts.

At 4.2 volts, it will vape at 10 watts.

 

[Jamell]

what you are thinking of is a 510 atomizer, looks just like a blu cartridge without the end piece... its just a coil with a small metal "tent" in a "hollow" tube with a 510 male connect thread... btw its a dripper.. I have 2 of them and really like them, good clean flavor. Mine are at 2.8 ohms. I dont understand why you want 4 ohms... you can use the 2.8 at a lower voltage to get the 10 watts you want

Can anyone please link me a website that sells at least a 2.3 atomizer like bunny described? Remember, not a catridge though, I posted pictures, please and thanks.

 

[Jamell]

Can anyone please link me a website that sells at least a 2.3 atomizer like bunny described? Remember, not a catridge though, I posted pictures, please and thanks.

Now that you guys have the pics of my atomizer and bunny's description of the atomizer with the hidden wicks under the little rubbed with the hollow tube tank, can you please link me a website that sells the atomizers at least 2.3 ohms? Thanks a lot.

 

[edyle]

You can get 2.0 ohm

Kanger ProTank 3 & Aerotank - Dual Coils - 5 Pack 2.0ohms