Need help with certain builds!

[BigCheef]

I posted a while back needing some help here, but I have been researching and I still feel like I am missing something.

I am using The sigelei 100W Plus and I have the Little Boy RDA by tobeco (Which I love), a Plume Veil clone by tobeco (Complete garbage to me), and I just ordered a Magma Clone by infinite(stoked!)

I also use 26g kanthal with organic cotton, and to let you know I usually tuck my cotton under the coils and out of the way of the air holes.

So lately I have been trying out different builds and I am just stuck, I have only tried dual coils, and I have tried a single coil in the plume veil clone but I don't want to count that seeing as I dislike that rda. & I have also decided that sub ohming may be more to my liking so far, but nothing below .30 ohms.

But what I really need help with is what builds to try with these three atty's? So far I have tried a .80, .50 .30 dual micros with the Little Boy and I am confused. I felt like when I first tried the .80 build I was getting massive clouds compared to the .50 and even .30, and was still conserving a decent amount of liquid. but I have been reading about .70 and above utilizing the full use of the Sig, but anything below that will not, and then I have read otherwise so hopefully you guys can understand the killer headache I am having over this lol.

I'm looking to make the Little Boy a cloud chasing build eventually once I get my Magma in, and I want to make my magma the ADV Atty that can conserve liquid, while also producing pretty thick clouds. The plume veil I don't even know. That thing is just meh to me. Couldn't find a good build with it at all but I am open to suggestions for it.

So basically, in your opinion and much better knowledge than my own, what would you refer for me to try with each one? I'm driving myself crazy over this 8-o

 

[dc99]

Well seeing as you have a hundred watts to play with there is no reason to build really low. You just turn it up if you want more power. Almost all these type boxes have a sweet spot that they perform best at. The thing is, the RDA's do to and the secrete is finding where they both work together.
The magma may be a disappointment to you. Its not a cloud machine but it does produce fantastic flavor. Works really well duel coiled .8-1.2

 

[batteredwombat]

I use twisted kanthal parallel coils, 7 wraps on 3/32 drill bit at 0.4 ohms on magma. Great flavor but not a fog machine as dc99 said. I run a single coil on it. Magma clone by infinite is very nice.

 

[BigCheef]

Well seeing as you have a hundred watts to play with there is no reason to build really low. You just turn it up if you want more power. Almost all these type boxes have a sweet spot that they perform best at. The thing is, the RDA's do to and the secrete is finding where they both work together.
The magma may be a disappointment to you. Its not a cloud machine but it does produce fantastic flavor. Works really well duel coiled .8-1.2

This is the hardest part when it comes to vaping and modding and etc. Because Everything does have a sweet spot and depending on so many different things. It's a lot harder for someone who's new to this like me to find out exactly what works where and with what. The magma may not be a cloud machine but it's a juice junkie and I need that for those long trips or even when I'm feeling a bit lazy to keep dripping every few hits, I also ordered an afc widebore drip tip with it to help some.

Like you said, there is no reason to build really low, and I think I'm starting to discover the sweet spot may be at .70 or above for my Sig. I'm guessing the best thing to do from here is to just waste a bunch of Kanthal until I find the right build. Haha. There's a lot of confusion (to me at least) when it comes to these regs compared to mechs.

 

[dc99]

Yeah there is a learning curve on them. I once ask this question. If I built a coil for a mech that produced 50w and then put it on a VV/VW box mod and cranked it to 50w would it be the same vape?

 

[BigCheef]

Alright, so I've decided to give a .80 ohm dual coil a try again on my little boy rda. Still using 26 g kanthal, bad thing is that I can't remember what drill bit I was using, Either 2mm or 3mm, honestly can't remember, so I was just wondering if you may know how many wraps I would need for either the micro or macro to get that. Hoping this stuff sticks with me soon enough, I hate coming on here and bothering everyone lmao.

 

[Yorkshire_pudding]

A nice coil calculator here
Coil wrapping | Steam Engine | free vaping calculators