- Status
We'll need more details if you want accurate help.
As what coil/resistance (usually written with a horse shoe type symbol on your mod)
Do you chain vape alot ? Also what's the juice ratio you're using ?
What kind of inhalation do you do ? Mtl as in like a cigarette or Dtl (which is a completely different method)
Did you smoke prior to vaping?
If you can i'd suggest having a picture of your setup available for others in case they'd need it (i for one have never heard of this mod tbh).
Also if you can describe the "loud noise" it makes that would help out a bit.
As what coil/resistance (usually written with a horse shoe type symbol on your mod)
Do you chain vape alot ? Also what's the juice ratio you're using ?
What kind of inhalation do you do ? Mtl as in like a cigarette or Dtl (which is a completely different method)
Did you smoke prior to vaping?
If you can i'd suggest having a picture of your setup available for others in case they'd need it (i for one have never heard of this mod tbh).
Also if you can describe the "loud noise" it makes that would help out a bit.
There are all sorts of things that can cause this, coil type airflow, amount of wattage that is applied (lower or higher) so it would really help if you described your setup a bit more and how you are vaping it currently.
Welcome.
Anna
Welcome.
Anna
- Resistance range: 0.15ohm-3ohm
- All-In-One design with detachable structure: The iJust NexGen skillfully integrates a built-in battery with a 2ml tank in one unit. The tank section can be detached and reassembled for easy cleaning and maintenance
- Convenient retractable top fill system: To fill the tank, you just need to slide the top cap with drip tip back to reveal the fill port
- Adjustable airflow system: The airflow can be adjusted by rotating the airflow control ring on the air pipe
- HW coil for big vapor clouds: The iJust NexGen comes with the well-made 0.2 ohm HW1 coil (40 - 80 watts) that provides a large amount of vapor production with optimal flavor
- Easy to use: With a single button to operate it, the iJust NexGen is easy to use, which is a nice choice for starter vapers or a back up for advanced vapers
- Long-lasting battery life: The iJust NexGen comes with a large battery capacity of 3000mAh, which can last you a rather long time of vaping
- Intuitive four color LEDs: With intuitive four color LEDs, you can easily check the battery status by a simple glance at the color of the light
- Dual circuit protection: The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging
Last edited:
I can use google lol Didn't mean about the kit, rather the coil's resistance he's using right now.
- Resistance range: 0.15ohm-3ohm
- All-In-One design with detachable structure: The iJust NexGen skillfully integrates a built-in battery with a 2ml tank in one unit. The tank section can be detached and reassembled for easy cleaning and maintenance
- Convenient retractable top fill system: To fill the tank, you just need to slide the top cap with drip tip back to reveal the fill port
- Adjustable airflow system: The airflow can be adjusted by rotating the airflow control ring on the air pipe
- HW coil for big vapor clouds: The iJust NexGen comes with the well-made HW1 coil that provides a large amount of vapor production with optimal flavor
- Easy to use: With a single button to operate it, the iJust NexGen is easy to use, which is a nice choice for starter vapers or a back up for advanced vapers
- Long-lasting battery life: The iJust NexGen comes with a large battery capacity of 3000mAh, which can last you a rather long time of vaping
- Intuitive four color LEDs: With intuitive four color LEDs, you can easily check the battery status by a simple glance at the color of the light
- Dual circuit protection: The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging
If the noises are a "gurgling" sound it means the coil is flooded. This can be caused by over-filling the tank or taking too hard of a draw when you vape. Use a more gentle draw technique and make sure that you don't over fill the tank.
This is a sub-ohm coil tank, so it will get hot during use. Normal.
Last edited:
I assume, since he/she is "new", they are using what came with the starter kit. O.2 ohm. Since this is a fixed voltage AIO setup, there is no way to adjust the power output.
Last edited:
Did you break the coil in ? (as in start below what's recommended, and slowly go higher)
I'd say poke some holes to make cotton wick better but i've got no idea about these coils so probably not a good idea unless someone confirms it.
It appears that you have gone from one end of the spectrum (flooded coil) to the other end (dry coil). Did you prime the coil with e-liquid prior to installing it in the tank?
This video is for a different tank/coil, but the principles remain the same for all tanks. You won't be able to "break in" the coil as shown in the video because your battery device has only one power setting, but it does show how to "prime" the coil. That's the major downside of a setup like yours: It's basically a mechanical mod with some rudimentary safety circuitry.
One of the complaints for this and other "fixed" output sub-ohm setups is the vape may be too harsh or warm for certain individuals. Often when a vape is unsatisfactory, a change in the wattage setting can correct the vape; but you can't do that with these types of devices.
Last edited:
- Status
Similar threads
