need some help :)

[Cody Brock]

hello guys noob here

I have the rdna 40w with a kanger tech sub tank mini and a atlantis aspire and was wondering how I can vape at 40w?

 

[Susan~S]

Hello and welcome to the forum. Glad to have you here!

Take it out of temperature control mode if you don't have nickle wire coils.

 

[Cody Brock]

Okay thank you I will do that. I just got the rdna yesterday how do I take it out of temp control?

 

[Brcinskij]

Hi, i want just tell you that subtank mini is best in between 20 - 30 W. At 40W you can get some dry hits...

 

[Brcinskij]

to turn temperature control off, adjust the temperature to 600 F and then press the + button one more time, then press the fire button

 

[Brcinskij]

also read this article, it could be helpful for you... kickcigsnow dot com review-vaporshark-rdna-40d/

 

[Cody Brock]

Hello and welcome to the forum. Glad to have you here!

Take it out of temperature control mode if you don't have nickle wire coils.

thank you.. is kanthal nickel wire?

 

[asharru]

No sir. Kathal is iron-chromium-aluminium (FeCrAl) alloy.

 

[Susan~S]

thank you.. is kanthal nickel wire?

No, they are two different types of wire.

Most stock coils are A1 Kanthal or Nichrome. There are a few suppliers who are selling stock coils made with nickel - Vaporshark is one of them.

When the evolve temperature control DNA40 chip came out it required nickel (NI200) wire. I don't have a temp control mod so I am not familiar with other wire that you can also use with temperature control.

Perhaps you might find some valuable info here =>DNA 40, NR, Nickel Builds

 

[Cody Brock]

No sir. Kathal is iron-chromium-aluminium (FeCrAl) alloy.

Ah bummer.. I'm gonna order some pure nickle from vaporshark then. .. will it work with the sub tank mini on the rba?
Also what size wire should I get

 

[mink101]

Hi there i was wondering if anyone could help, i tried to post on the itaste vv thread but it wouldn't let me as I've just signed up. Any way I purchased an innokin itaste vv 3 weeks ago and have been getting on great with it, however, since yesterday it wont let me change the volts, now it only lets me change the watts. whether i press the plus or minus and the power button it only lets me change the watts e.g P8.0 not U4.0. this is really annoying as the voltage setting its on, is a little high and tastes burnt. A friend of mine who i bought the exact same itaste for is still able to change the voltage and as i previously said it was only yesterday when it stopped letting me change the volts. any help and suggestions would be great, many thanks.