Nemesis? Not really feeling it. Suggestions?

[AsianFrank]

I would absolutely love my nemesis if it were for that stupid little pin in the switch. I know it prevents it from spinning pointlessly but I don't get why it couldn't have been built into the switch design. Like soldered or something.

BTW the magnets do help alot but it still has to be hit center.

 

[emus]

I would absolutely love my nemesis if it were for that stupid little pin in the switch. I know it prevents it from spinning pointlessly but I don't get why it couldn't have been built into the switch design. Like soldered or something.

BTW the magnets do help alot but it still has to be hit center.

I deleted the pin in all 3 china nemis and love the free spinning button.

 

[LReyes66]

if only my authentic kayfuns had adjustable 510 id stick that 510 connection all the way out so I can tighten the switch all the way on my nemmy. Can only do that on my russian91 and BE KFL+ Clone

 

[emus]

I don't like adjustable 510 connector toppers because the adjustment introduces another voltage drop.

 

[xtwosm0kesx]

Horse Hockey!

I finally figured you out Crxess, you're the reincarnated ghost of Harry Morgan...

 

[LReyes66]

I don't like adjustable 510 connector toppers because the adjustment introduces another voltage drop.

didnt know that. Hell might now consider a DNA30 regulated device since the lowest subohm i go to is .7 ohms for my kayfun type rba. That means on mechs im only using about 25 watts at most on a fully charged battery.

 

[ianryeng]

If you are looking for something more substantial check out the FT Launcher V2 - makes my sigelei feel cheap and copper contacts are a nice bonus

Sent from my Nexus 7 using Tapatalk

 

[crxess]

I finally figured you out Crxess, you're the reincarnated ghost of Harry Morgan...

No, but not a lot younger - lol. Mash was one of my all time favorite sitcoms.

Emus - Fixed this for you -

I don't like adjustable 510 connector toppers because the adjustment introduces another Possible voltage drop.

No noticeable difference in my (2) Rocket Tanks, (3) Ithaka's or (2) Kayfun Lite Plus B.E. Tanks and that adj. 510 pin is very handy.

 

[emus]

Emus - Fixed this for you -

Thanks. Mama said anything is possible

 

[NatureBoy]

Wouldn't taking the pin out make it difficult to unscrew the button?

 

[emus]

Wouldn't taking the pin out make it difficult to unscrew the button?

No problem on my 3 china nemis. Just hold button side up and twist. I close top gap last.

 

[AsianFrank]

I deleted the pin in all 3 china nemis and love the free spinning button.

Thats how mine is now since i lost that pin. I hate it.

 

[LReyes66]

Got my magnets in from supermagnetman. These magnets are strong to the point I broke 1 trying to pull them apart.

2 is enough to give u a soft throw, a improved version of the stock spring. 4 will make it sturdy and harder of a throw. Im using 3 cause its enough resistance and firmer throw that I can stand it up unlocked without it firing. Its a huge improvement from the springs, but it isnt buttery smooth like what the magnets did for my chi-you. Maybe a bit of dw-40 can fix that...


edit: actually my preferred now is 4 magnets cause im liking the real firmness of it

 

[emus]

Thats how mine is now since i lost that pin. I hate it.

Funny how people's likes differ.
I hated the pin because my naughty pinky was always unscrewing the switch.
Pin delete allows button spin and smoother actuation on my chemi.

 

[LReyes66]

I actually found polishing the switch post/delrin/copper part helps with the crunchiness. I only had mother mag polish and no sandpaper but it was good enough!

Also you could also shorten the throw with this method http://www.reddit.com/r/electronic_...ix_for_the_nemesis_button_and_how_to_shorten/

 

[crxess]

Got my magnets in from supermagnetman. These magnets are strong to the point I broke 1 trying to pull them apart.

2 is enough to give u a soft throw, a improved version of the stock spring. 4 will make it sturdy and harder of a throw. Im using 3 cause its enough resistance and firmer throw that I can stand it up unlocked without it firing. Its a huge improvement from the springs, but it isnt buttery smooth like what the magnets did for my chi-you. Maybe a bit of dw-40 can fix that...


edit: actually my preferred now is 4 magnets cause im liking the real firmness of it

You do NOT pull 1mm magnets apart - They Break - You slide them apart(and they don't break)

 

[LReyes66]

You do NOT pull 1mm magnets apart - They Break - You slide them apart(and they don't break)

yeah i learned the hard way. Oh well still have 9 and only need 3-4 to use on my nemmy.

 

[mxrdrver]

I have the hcigar nemesis. It's nice. well built. But, I don't like it. It's too smooth and it hurts my hand having to grip it for more than a few minutes. I hate having to lock the ring everytime I want to set it down. My M16 can be set down standing upright without having to lock the ring.

 

[LReyes66]

Magnets fix that

Sent from my Nexus 5 using Tapatalk

 

[NatureBoy]

Even after sanding/polishing/buffing the button parts, I still don't like the button very much. Best button so far that I've tried is still the Paps button. I prefer a button inside a ring, as opposed to the whole bottom being a button.. makes the action a lot smoother.