Nemesis With A Kayfun Light or Plus

[Blackoutvader]

Just wondering if the parts listed is what i need in order to have a kayfun lite or plus to work on my Nemesis

Note: I'm not saying I'm getting the parts from this site...just showing the parts. Not really getting into where to buy just what i need
thanks

Do i need this? or can i run without it
Variable Wattage Kick Module:
https://www.fasttech.com/product/1501000

Connection Parts for kayfun V3.1 Nemesis mod : Is this just for that version??
https://www.fasttech.com/product/1666400

Or if you know what will work, can you tell me so i can put a Tank (wanting a Kayfun) system on my Nemesis. I have a Red Copper Stingray that I'm using now for a dripper and just want to change the Nemesis up

Thanks in advance

 

[gibbsy]

i just got a kayfun light V2 and a nemesis there so i can say without a doubt you dont need that other stuff for it to work, although i did buy a kick for mine(was the sigelei one as it went to 15w). also i got the light V2 as the diameter fitted the nemesis perfectly not sure about the V3 so maybe check that out

 

[Sthur]

You don't need those parts, I run my tobeco KFL at 1.2 on my ft nemi and works great. It's 15 watts so need for a kick unless you want to run 1.6 or 1.8 ohm coils. The 1.2 works great.

 

[Blackoutvader]

Thanks for the replays! Nice that all I need is the tank to get this going. Gonna use 18350 mod to stealth it up lol. I have a copper 18650 mode


Addicted to cars and vapor

 

[regal55]

I think you need a kick. Every now and then you get a juice that doesn't burn without it, but I just turned the wattage down on my net with KLF and the flavor is much better.


Only time I don't use a kick is in cigar mode, 18350 batter supersoft spring switch. Just like a stogie. That's why the big SVD's and Provari's will never extinct the nemesis; cigar mode.

 

[tj99959]

You need the Evolv Kick 2, not that FastTech version. The FT version will only boost the power up, and the Kick 2 will regulate the power both up & down.
I have a Kick 2 in my Nemmy set at 10 watts, with a 1.25 ohm coil in my KF that = 3.5v. The one from FastTech would have you running at battery voltage (unregulated) until your charge dropped below 3.5v.