3 was too strong for my liking,but half the fun is playing around with it lol. Couple notes; the magnets were a b$&@! to take apart, and very fragile once separated. It will be useful having 6 extra magnets (yeah I broke 2).
Nemmy Magnets
- Thread starter Heavyrocker
- Start date
- th_trl_thread_readers 0
- Status
3 was too strong for my liking,but half the fun is playing around with it lol. Couple notes; the magnets were a b$&@! to take apart, and very fragile once separated. It will be useful having 6 extra magnets (yeah I broke 2).
Never Pull magnets apart!! Never, ever or ..............well you know.
Slide them apart. works every time.
ETA - if magnets seem weak, it is the Spacing between. Remember throw is adjustable. just place a thin nylon washer under the bottom magnet to bring them closer together.
*tested and proven to work*
Last edited:
Just received a set of 3 Nemesis magnets, I'm running all 3…way better for me, shortens the switch throw and never have to lock it with the extra stiffness.
For those who ordered the DX magnets, did you get any kind of shipping notice? I ordered about 2 weeks ago and have not heard anything from them other than a paypal confirmation.
6 Pcs of N52 OD9 16" x 3 8"ID x1 16"Neodymium Ring Magnets | eBay
Same OD and ID measurements, 1.58mm thick instead of 1mm. Hopefully faster than shipping from China.
EDIT -- Nevermind. Shipping is $14.
Same OD and ID measurements, 1.58mm thick instead of 1mm. Hopefully faster than shipping from China.
EDIT -- Nevermind. Shipping is $14.
Last edited:
Just checked my old email, and I ordered on 11/1 and got a shipping notice on 11/6 for the magnets I ordered.
I'd shoot them an email asking them the status of your order. I hope they just overlooked the sending the notice and they show up, but I don't think it would hurt to ask them what's up.
Just had a chat with someone there. It's been shipped, but since the order was under $15 there is no tracking number. He was able to give me my order number, but didn't say why I never got a order confirmation/shipping notice. Shipped on the 19th and he said to allow 2-6 weeks for delivery. Heh, hoping it's closer to 2.
DX - does not send follow up notice on shipping.
China Post tracking can also be a joke.
My magnets magicly appeared in the US after 3 weeks in Never Never Land partying with Peter and Tink.
Should be here Tues.
I'll post back once I try them out. 12hr. work shifts until Wed.
China Post tracking can also be a joke.
My magnets magicly appeared in the US after 3 weeks in Never Never Land partying with Peter and Tink.
Should be here Tues.
I'll post back once I try them out. 12hr. work shifts until Wed.
Thanks.
Done and done. The 14 x 9.5 x 1 will work in mu bagua too
Was this for the 22mm bagua or the 17mm bagua?
bagua clone just over 22mm has plenty of room for dx magnets according to my calipers.
Can't say right now, but I have a clone from fasttech ordered, and if I remember (a month from now or later whenever it gets here) I'll update the thread. If you are talking about the original Caravela, I'm sorry I can't help out with that.
DEAL EXTREME MAGNETS = NO!!!!!!!!!!!!!!!!
Will Not fit without modification. Center is to small @ 9.5mm and will not clear Rice pellet(Pin)
May try sanding out a few - only because I have 10 useless magnets now.
* if you try this seal with nail polish or something afterward.
Will Not fit without modification. Center is to small @ 9.5mm and will not clear Rice pellet(Pin)
May try sanding out a few - only because I have 10 useless magnets now.
* if you try this seal with nail polish or something afterward.
DEAL EXTREME MAGNETS = NO!!!!!!!!!!!!!!!!
Will Not fit without modification. Center is to small @ 9.5mm and will not clear Rice pellet(Pin)
May try sanding out a few - only because I have 10 useless magnets now.
* if you try this seal with nail polish or something afterward.
Absolutely wrong. I have them in use one and they fit fine, even a little wiggle room.
Remove the pin, place magnets, replace the rest.
The magnets stay below the pin and the rest of switch.
Last edited:
Sorry crxess, but I'm rooting for dzzfzz to be right
Haha I have pictures... It's not my loss. They work great. I added a third for a stronger throw.
They fit fine if you install them right. Just like the pics above show.
I just wish they were between 2 and 3 magnets in strength with only 2 magnets. When I get some time I'll be shimming up the bottom magnet to try to get them just right. They are definitely smooth with just 2 magnets, smoother than the springs.
Edit- crxess, when you use the picture above and install them correctly it would be nice if you go back and edit your posts in the different Nemmy magnet threads so you aren't passing along bad info. to people looking for magnets that fit the mod.
I just wish they were between 2 and 3 magnets in strength with only 2 magnets. When I get some time I'll be shimming up the bottom magnet to try to get them just right. They are definitely smooth with just 2 magnets, smoother than the springs.
Edit- crxess, when you use the picture above and install them correctly it would be nice if you go back and edit your posts in the different Nemmy magnet threads so you aren't passing along bad info. to people looking for magnets that fit the mod.
Last edited:
Still looking forward to DX magnets delivery, but hard to imagine better switch than DIY short throw switch.
The stock switch was scratchy but the DIY short throw switch is smooth; practically a touch switch.
Mod is a hair shorter and throw is about 0.5mm with DIY lock washer and OEM springs.
Does support heavy RTA w/o firing.
The stock switch was scratchy but the DIY short throw switch is smooth; practically a touch switch.
Mod is a hair shorter and throw is about 0.5mm with DIY lock washer and OEM springs.
Does support heavy RTA w/o firing.
Attachments
I suppose Right is in the eyes of the one doing the deed. I have the proper magnets in my First Nemesis and the magnets clear the pin and ride full length on the switch.
This application is definitely different than original design and intent. I'll give it a try and compare the 2.
Update: Takes all of 2 minutes to install that way, so I did Both other Nemesis.
Had to use 3 magnets in each to get a decent feel.
Short mode SS with IGO-L sits okay
Full length Brass with Rocket Tank, considerably lighter than an Ithaka, Fires if sat down.
My Full Length SS with Ithaka and Spec magnets sits unlocked with no problem.
Conclusion - If you need/want a get by setup DX magnets will work. If you want an accurate setup get the originals or the correct 17mm magnets available and add a 1.0-1.5mm thick nylon washer under the bottom magnet.
This application is definitely different than original design and intent. I'll give it a try and compare the 2.
Update: Takes all of 2 minutes to install that way, so I did Both other Nemesis.
Had to use 3 magnets in each to get a decent feel.
Short mode SS with IGO-L sits okay
Full length Brass with Rocket Tank, considerably lighter than an Ithaka, Fires if sat down.
My Full Length SS with Ithaka and Spec magnets sits unlocked with no problem.
Conclusion - If you need/want a get by setup DX magnets will work. If you want an accurate setup get the originals or the correct 17mm magnets available and add a 1.0-1.5mm thick nylon washer under the bottom magnet.
Last edited:
- Status
