New arrival! Original Ultroner Victory 60W VW Box Mod

Status
Not open for further replies.

GinaVape

Forum Supplier
ECF Veteran
Feb 14, 2017
11,303
404
32
www.3fvape.com
Hi, guys! Welcome to New Product Introduction! I have a question: do you need a VW Mod at present? Today let me introduce you one mod named Original Ultroner Victory 60W VW Box Mod. Now let’s take a closer look at the mod below.

The Ultroner Victory VV VW Box Mod is constructed from Stabwood and Stainless steel material, integrating the SEVO-60 chip set, an ultra premium and user friendly output board that is more than capable to compete with some of the best chip sets in the industry, packed into a compact and beautiful chassis. The box mod is powered by single high amperage 18650 battery (Not included). With an output range of 5W to 60W and an atomizer resistance range of 0.1ohm to 3.0ohm, the Victory can drive output among the best in the single battery driven market segment. This chip also features wattage, voltage and bypass modes allowing users to use their preferred power set. To get into the various modes users can utilize the stainless steel fire button located above the OLED display. Clicking the firing button three times allows users to access the mode selection menu. Users may change the output via two small stainless steel up and down buttons. The SEVO-60 also features a lock in order to prevent any mishaps. This can be accessed by holding down the two up and down buttons. With the quality chassis constructed from Stabwood and Stainless Steel and the SEVO-60 chipset, the Victory 60W Box Mod is the essential high end system for vaping enthusiasts and advanced users.

authentic-ultroner-victory-60w-vv-vw-variable-wattage-box-mod-black-stabilised-wood-stainless-steel-560w-1-x-18650.jpg
authentic-ultroner-victory-60w-vv-vw-variable-wattage-box-mod-black-stabilised-wood-stainless-steel-560w-1-x-18650.jpg

authentic-ultroner-victory-60w-vv-vw-variable-wattage-box-mod-black-stabilised-wood-stainless-steel-560w-1-x-18650.jpg
authentic-ultroner-victory-60w-vv-vw-variable-wattage-box-mod-black-stabilised-wood-stainless-steel-560w-1-x-18650.jpg


Main Features:
Size: 88 x 55 x 35mm
Chip Type: SEVO-60 Chip
Battery Type: Single 18650 Battery (Not included)
Output Power: 5~60W
Resistance Range: 0.1~3.0ohm
Maximum Voltage: 8V
Vaping Modes: Wattage / Voltage / Bypass Mode
Three Button Control
One Firing Button
Two Adjustment Buttons
OLED Display
Puff Counter
510 Threading
Gold Plated
Spring Loaded
Micro-USB Charge Port
Threaded Battery Door
Integrated Protections

There are three colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
Original Ultroner Victory 60W VW Box Mod >>>

More VV &VW Mods are available on 3FVAPE:
3FVAPE - VV &VW Mod >>>

Atomizers are available at 3FVAPE:
3FVAPE - Atomizers >>>

Vaping accessories you would like:
3FVAPE - Wick, Wire, Mesh >>>
3FVAPE - Cotton >>>

More Original Ultroner products are in stock now:
3FVAPE - Original Ultroner >>>
 
Status
Not open for further replies.

Users who are viewing this thread