-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
New EGO TANK system.
- Thread starter ournature
- Start date
- th_trl_thread_readers 0
- Status
I think so...I have a tracking number but there's no activity on it. I hope it has!
i notice when the tank is around 50%-60% empty it will leak like mad? the ego-t i currently have is a sample, not retail version, did they fix the problem already for the retail version?
I have a tracking number also with no activity. I am quite sure they use bulk flat-rate shipping boxes, which means the tracking number is printed when the print the adress label, but will not show in the system until the postman scans them at pickup.
They do not have a small operation there, and the postman comes with a small truck everyday. There is no "USPS contacted for pickup." the tracking number should be active tomorrow when the postman scans them into his doodad.
disclaimer: Yes, I have seen the operation. I have been to Totally Wicked's location many times in the past.
They do not have a small operation there, and the postman comes with a small truck everyday. There is no "USPS contacted for pickup." the tracking number should be active tomorrow when the postman scans them into his doodad.
disclaimer: Yes, I have seen the operation. I have been to Totally Wicked's location many times in the past.
Mine hasn't been shipped yet (status still just says paid) but I only just ordered it yesterday so it will probably be a while before it is.
Last edited:
Do you want the truth?
Any single piece will be different to the other.
When you get the good one it will work great with about any juice and vaping style you have and will be the best vaping experience in regard of vapor and flavour.
But you can get the one that do not wick very well or the one that leaks.
The good part is that the tawa version is not so expensive, at least in the US, here in europe is more expensive and i don't know why, being an european design.
Sounds like your unit is similar to mine.
I was able to "fix" mine by "fluffing" and re-orienting the wick inside of the piercing tube. But that's not for the faint of heart.. or those with bad eyesight!
I also have an atty and tanks on order from TW as of last night. I'm hoping it works well. I've been vaping an Ego since mid December and my best experience right now is with Boge 2.0 ohm cartos. Have been considering a GG but would rather go this route if it works well.
Ok- update on cleaning.
One of my atomizers (the TAWA) which I had vaped straight for two weeks started to taste really ratty. So it was time for a cleaning I assumed.
My preference for atty cleaning is an isopropyl alcohol soak. But these atties are of a different construction. So I knew I was taking a risk.
Essentially, the atty was given a 15 minute soak. And I ran the alcohol through it as seen in my vids.
Results:
Concern #1: That either the coating or the white lettering would come off the atty. It did not.
Concern #2: That the alcohol would not completely evaporate out of the wicking. The atty was left in airflow for over 25 hours, and 92% isopropyl alcohol was used.
Concern #3: That the atty would not rewick after being totally dried.
Concern #4: I would ruin the atomizer.
None of the concerns became reality. I filled a tank and put it on the cleaned atomizer. Left it for 30 minutes to wick. And tested it. Got a good hit... very clean taste as if the mixed up juice flavors were gone. Then a dry hit...
After a couple more sucks on the eGo-t without pressing the button, the tank seems to have emptied by a quarter. And then vaping returned to normal.
I'm two tanks in and it's vaping like a champ. And tasting cleaner than the "virgin" atty I used while it was out of commission drying.
I'll beat this cleaned atty up for a bit and report any problems.
One of my atomizers (the TAWA) which I had vaped straight for two weeks started to taste really ratty. So it was time for a cleaning I assumed.
My preference for atty cleaning is an isopropyl alcohol soak. But these atties are of a different construction. So I knew I was taking a risk.
Essentially, the atty was given a 15 minute soak. And I ran the alcohol through it as seen in my vids.
Results:
Concern #1: That either the coating or the white lettering would come off the atty. It did not.
Concern #2: That the alcohol would not completely evaporate out of the wicking. The atty was left in airflow for over 25 hours, and 92% isopropyl alcohol was used.
Concern #3: That the atty would not rewick after being totally dried.
Concern #4: I would ruin the atomizer.
None of the concerns became reality. I filled a tank and put it on the cleaned atomizer. Left it for 30 minutes to wick. And tested it. Got a good hit... very clean taste as if the mixed up juice flavors were gone. Then a dry hit...
After a couple more sucks on the eGo-t without pressing the button, the tank seems to have emptied by a quarter. And then vaping returned to normal.
I'm two tanks in and it's vaping like a champ. And tasting cleaner than the "virgin" atty I used while it was out of commission drying.
I'll beat this cleaned atty up for a bit and report any problems.
Thanks for the update on cleaning. I've only had mine a few days but it's never to early to think about cleaning.
thanks for all the advice! i'm hoping i have the same amount of luck you have had so far!
It seems like your cleaning process worked out well cozzicon.
I'm on my first month with my 'good' atty and it's still doing pretty well with a cleaning every 25-30ml.
I can confirm that after the first cleaning the taste is cleaner than out of the box.
I couldn't wait. I ordered one tank atty and 5 refill tanks from totally wicked this morning. I really hope it is one of the good ones. It's really not too much more expensive than the ego mega cone and cylinder attys and carts I'm using right now. Hopefully someone will get all the colors so my blue and green egos can have tank attys too. If they actually work well.
Well I have to say - I'm back on the Dunhill Lights. Less hassle. For what it's worth.
should my new attys I'll get on saturday work well and should one of my 5 juices even come near close to smoke from the Dunhills, I might still convert to vape. Fingers crossed. But the sad fact is that right now cigs work - pvs don't.
I'm hoping new attys and my new baccy mixes will satisfy. When my pvs were new I was well into the vape. But now they're being pain in the butts - well....
Sorry, but think you're being overly optimistic.
What with me, many European eGO-t customers complaining of failing units and even Scottybee mentioning burnt tasting vape after a short time.... I'm wondering if some people are so desperate to make this work that they are willing to run the gauntlet of many $$'s spent, poor quality controlled products (I truly feel that way) and many juices not provinding satisfaction and attys worn out afer mere weeks just to think this technology is working.
Me - I'm not sold right now. Not at all.
3.5 weeks in, 150usd spent on pv kit, 100usd on juices and only my first 2 weeks (between burnt tastes and then washed and dries) of decent vape..... That's 250 usd on a very 'MEH' experience.
And as I write this my Dunhill Light is doing just what it should.
I want more out of this vaping tech b4 I'm sold on it.
Just my tuppence.
Last edited:
My status was just updated to SHIPPED and I have a tracking number WOOHOO hope I can track it by later tonight or early morning!
- Status
Similar threads
