New From Youde - IGO-W3 Quad Coil Rebuildable Dripper Stainless Steel w/ Adjustable Air Flow

[dannoman]

Youde IGO-W3 Quad Coil Rebuildable Dripper Stainless Steel

Introducing the new Youde IGO-W3 Rebuildable Stainless Steel Dripping Atomizer. The IGO-W3 Rebuildable Dripping Atomizer - sealed 510 connection thread, built solid from the base up. Multiple air vents located at the base (adjusted on the inner and outer casing) and 5 total posts are for Quad Coil configuration.

Main Features:

• Stainless Steel Construction
• Variable Adjustable Air-Holes
• 5 Post Quad-Coil Design - coil up to 4 wick/coil combinations
• Comes with a packet of spare parts including wick, coil, o-rings and spare sealing grommet insulator, screws

• Use Phillips head screw driver for positive & negative posts
• 4 post for 1-8 Coil configuration
• Rebuild using fiberglass or silica wick
• Does not come with a drip tip but fits most 510 drip tips
• Dimensions: Length: 1-3/16" high by x 7/8" wide
• Tip: the o-rings seal at base and can make it difficult to 'twist cover to adjust air-flow. We recommend yu dress the o-rings with a touch of yur ejuice or similar. To remove top cover for the first time slide your thumbnail or some such beneath the seam and wiggle up, then can be removed easily.
• This is a DRIPPER, NOT a Tank! You will want to put a few drops on the wick/coil before vaping to prime the unit and allow it to soak - it has a decent size well to help prevent leakage and a sealed 510 connection to protect your batteries.

Youde IGO-W3 Quad Coil Rebuildable Dripper Stainless Steel [gv-YoudeIGOW3RDA-Stainless] - $29.95 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[badkolo]

that is a fine looking rda

 

[woody55]

Very nice unit, as Daniel has stated in bullet points above the top fits very tight on it but if you put a little juice on the o-rings it makes it easier to remove the next time!

 

[wolfstone5]

Looks like you could do some serious damage with that bad boy!

 

[cantstopwontstop]

Just be warned this thing is super time consuming to set up, but yes, it is a cloud machine. Running at .4 ohms it burns through juice like no ones business!

 

[badkolo]

View attachment 291374

Just be warned this thing is super time consuming to set up, but yes, it is a cloud machine. Running at .4 ohms it burns through juice like no ones business!

but you dont have to set up all 4 do you, cant you do 2 and just go that route

 

[dannoman]

and we do have subohm wire - you can coil up two inches and get .6ohm with the Vapowire 26 GA

View attachment 291374

Just be warned this thing is super time consuming to set up, but yes, it is a cloud machine. Running at .4 ohms it burns through juice like no ones business!

 

[dannoman]

Yes you can go to one coil if ya want and dual coil that set up...if you want

but you dont have to set up all 4 do you, cant you do 2 and just go tha


t route

 

[badkolo]

Yes you can go to one coil if ya want and dual coil that set up...if you want

exactly, thats what i was thinking, you dont have tog o the full 4 coil route if you dont want too.

 

[cantstopwontstop]

Setting up 2 coils is possible on an IGO W3 but a pain in the A** because of the small work space. If you only want a dual coil build save yourself a massive headache and get an IGO W or W4.