NEW Kanger T3S Coil Heads for New Kanger T3S - Available Now

[dannoman]

Kanger has come out with a new configuration for the T3. It has separated the large base from the coil head. Right now we only have the coil head replacements but we have the new T3S in the air now coming to us. You need the base with these heads so only purchase these if you already have some T3S. We still have the regular T3 replacement base/coil heads available.

NEW Kanger T3s Bottom Coil Replacement Coil - 1.8ohm [gv-KangerT3sReplacementCoil-1.8] - $1.75 : GotVapes.com, E-cigarette Supplies - Atomizers Cartomizers Mods Juice and more​

 

[dannoman]

We have the bases only coming in stock next week.

 

[yiddleboge6]

Thank you Danno....

 

[Harplayr]

Are these coils compatible with EVOD and ProTanks?

Once you get the bases I'm gonna get some. I love the Kanger modular base designs. They work so well in both the evod and protank, I'm sure they'll be great in the T3S

 

[dannoman]

Harplayer I am not sure but what woudl be absolutely wonderful is if all these type of heads from Kanger for the EVOD, ProTank and now the T3s could be all compatible. It seems like an easy check but I am incredibly busy and have not had time to really flesh this out yet but I will definitely try. The heads for the ProTank and the EVOD are cross-compatible although reports are coming back that using them in one or the other provides a slightly different vape affecting th airiness or tightness of the vape.

I will definitely say it woudl make it much easier in my shipping department and in keeping up with the inventory....

 

[Harplayr]

Thanks Dano

Cross platform compatibility would be a big plus, but even if they are T3S specific I think that with the track record of the EVOD and ProTank it will be an excellent coil and I'll buy them either way.

When you get the time, please check and let us know.

 

[WorksForMe]

We have the bases only coming in stock next week.

Do you know when you're going to get T3S tanks?

Are these coils compatible with EVOD and ProTanks?

Once you get the bases I'm gonna get some. I love the Kanger modular base designs. They work so well in both the evod and protank, I'm sure they'll be great in the T3S

The new T3S heads works well on an Evod tank. I don’t have a Protank, but I read on the Clearo forum that they work for it too. Unfortunately, the Evod heads still won’t work with a T3 tank. When I run out of Evod heads, I think I’m just going to use the new T3S heads on both tanks. They work great.

J.R.

 

[Harplayr]

Do you know when you're going to get T3S tanks?



The new T3S heads works well on an Evod tank. I don’t have a Protank, but I read on the Clearo forum that they work for it too. Unfortunately, the Evod heads still won’t work with a T3 tank. When I run out of Evod heads, I think I’m just going to use the new T3S heads on both tanks. They work great.

J.R.

That's really good to hear!
I'd love to be able to stock just one set of spare coils that can service all 3 clearo's.
While some have noticed slight differences when an evod coil is used in a protank, they seem to work just fine for me.

 

[WorksForMe]

Oh, and I like the knurled T3S base on an Evod. It’s easier to hold on to while removing the battery, so you don’t accidentally unscrew clearo base and dump the tank in your lap. Don’t ask how I know that’s possible.

Finally, a T3 that works good without a lot of fiddling!

J.R.

 

[dannoman]

We actually have a supply of T3S complete units winging our way...

 

[mudhill]

i have not been on the ECF forum for a while,have not had to order any thing from my suppliers either,,but i am glad to see the new t3s coils are out,it will make my life easier now,,,,I love my T3's and evods.

 

[mudhill]

you know it is a little miss leading when you show a 5 pak for a $1.75 and you only get one for that price,,i fell in to this trap a few months ago and ordered 6 evod coils thinking i was getting 6 paks for the price of 6 single coils.
oh well live and learn,what the hell.

 

[badkolo]

ill have the picture adjusted, sorry about, no bad intentions, we were just busy at the moment and didnt realise that might happen.

 

[dannoman]

I'v updated the product pages to make sure there is no misunderstanding.

 

[mudhill]

thanks guys,i know there was no ill intentions,,,just sayin.

 

[Sparrots]

Sweet! Just placed my order (another one, LOL) Rebecca

 

[gerrymi]

I have 2 Kanger T3S's with 1.8 ohm heads (figuring I'll use them with my eGO-C's) and 2 Kanger T3S's with 2.5 ohm heads (figuring I'll use them with my Vision Spinner).

Unfortunately...all 4 are the SAME color!!??!!

Is there any way to tell the 1.8 heads from the 2.5 heads?

 

[rdsok]

I have 2 Kanger T3S's with 1.8 ohm heads (figuring I'll use them with my eGO-C's) and 2 Kanger T3S's with 2.5 ohm heads (figuring I'll use them with my Vision Spinner).

Unfortunately...all 4 are the SAME color!!??!!

Is there any way to tell the 1.8 heads from the 2.5 heads?

I believe the latter ones made are marked below the threads that screw into the base... any others will require that you test them with a multimeter or an ohm's tester just like most other carto's, clearo's or atties.

 

[dannoman]

There should be etching- it is quite small though on the shank below the threads - hol dunder light and you shoudl pick it up...

I have 2 Kanger T3S's with 1.8 ohm heads (figuring I'll use them with my eGO-C's) and 2 Kanger T3S's with 2.5 ohm heads (figuring I'll use them with my Vision Spinner).

Unfortunately...all 4 are the SAME color!!??!!

Is there any way to tell the 1.8 heads from the 2.5 heads?

 

[mottlycrw]

Are these heads the new ones with the knurled posts and not grooved? also, do they have the new grommet material that doesn't burn like the old ones? refer to PBusardos site... [tasteyourjuice.com/wordpress/2013/10/04/nothing-like-some-new-heads]

I will be quick to buy if these are the ones Thanks