• This forum has been archived

    If you'd like to post a thread, post it here instead!

    View Forum

NEW/ODD APVs models you found,post them here!

Jump to latest Follow Reply
Status
Not open for further replies.
Sort by date Sort by reaction score
martinc

martinc

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2011
4,584
2,068
59
Montreal,Quebec,Canada
Lets see what the world has to offer in the likes of APVs,tanks,etc,dont worry about posting anything,even if its old,somebody somewhere probably hasnt seen it yet!

Let me start with a few:

1-The Pearl passthrough:The Pearl PT

Looks good,stand looks good,voltage choice is nice,I am trying not to get one

2-Vaporlux Box mod : VaporLuxe Rev.2 - White

Looks nice,selectable voltage (starts high though) uses 18650,incorporated charger and most important,check the dimensions!

3-NGP genesis style: NGP Elektromos Cigaretta | NGP – a magyar, kézm

About $80 all included and shipped!

4-The Svoemesto: Мод «SvoёMesto» v.2.0 ― SvoёMesto

Now only if you boast a gold tooth and have 24" spinner rims on your escalade....seriously,its expensive (mine is coming)

5- RA tank: THE RA TANK BY CRACK

Price is a bit high,love the spring loaded washers for the wires ends..is it worth almost $100 shipped? I dont know.

6-The DiD: "The DID"

What? You didnt pass your order yet? Madness!
 
martinc

martinc

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2011
4,584
2,068
59
Montreal,Quebec,Canada
ChellyNelly said:
The RATank is $85 shipped, even to Canada. I'm still waiting on mine but it should be here any day now. I'll let you know if it's worth it once I figure it out, but God Martin, you spent almost a grand on the Svoemesto!!! :lol: :lol: :lol:
Click to expand...

Keep in mind that I have sold 8 of my GGs prior to buying that wand,so dont worry :)
 
joey.r

joey.r

Full Member
May 30, 2012
50
16
the big smoke t.o
martinc said:
Lets see what the world has to offer in the likes of APVs,Tanks,etc,dont worry about posting anything,even if its old,somebody somewhere probably hasnt seen it yet!

Let me start with a few:

1-The Pearl passthrough:The Pearl PT

Looks good,stand looks good,voltage choice is nice,I am trying not to get one

2-Vaporlux Box mod : VaporLuxe Rev.2 - White

Looks nice,selectable voltage (starts high though) uses 18650,incorporated charger and most important,check the dimensions!

3-NGP genesis style: NGP Elektromos Cigaretta | NGP – a magyar, kézm

About $80 all included and shipped!

4-The Svoemesto: Мод «SvoёMesto» v.2.0 ― SvoёMesto

Now only if you boast a gold tooth and have 24" spinner rims on your escalade....seriously,its expensive (mine is coming)

5- RA tank: THE RA TANK BY CRACK

Price is a bit high,love the spring loaded washers for the wires ends..is it worth almost $100 shipped? I dont know.

6-The DiD: "The DID"

What? You didnt pass your order yet? Madness!
Click to expand...


mmmm the pt pearl looks tempting for my home solution... and they are close to me ...well us side of Niagara..mmmmmm
 
WolfeReign

WolfeReign

Ultra Member
ECF Veteran
Verified Member
Dec 19, 2011
1,716
828
52
Wolfe Paradise
For those that need to dig for the translator, i found the sites above were rather funny when put into English. Some thing i learned about french and speaking to my wife who is English only (and those who have read Chinglish) some words do not fit into the vocabulary very smoothly:

From The "DID" (greek to english)
Out Of Stock
Preorders are up to 16-June-Saturday
sent the 18-June-Monday
Free Shipping

A steamer forever!

The "The DID" has been built with simplicity in mind first!

The steamer consists of 6 metal parts

All steel except for the bronze axonaki the positive pole!

Adjustable positive pole with brass nuts!

Thread 510

Capacity 3,5 ml.

Main body Dimensions 50mm X 20mm. (Without the pipaki)

The package will contain:

4 mesh 400 pieces with dimensions of 3.5 x 5cm

4 mesh 325 pieces with dimensions of 3.5 x 5cm

1 meter resistance Kanthal A1-32AWG 0,2 mm
Click to expand...

From Svoemesto (Hungarian to English)

The NGP is a revolutionary new technology, Genesis was born. A tightly woven wire mesh tube provides a continuous supply of liquid, its top part is made of the ellenálláshuzalból roll.

Genesis of the NGP is made in two sizes, the normal size of 17cm and length szipkával's battery is designed for 18,650. The shorter (NGP Genesis Mini) size of 14cm and 18 350's battery is included. To do this, the battery is connected to the threaded pipe hub unit, which includes the boiler, heating and switch.


NGP Genesis ring switch
The latter is made in two versions, a mechanical switch and touch switch is available.

The brain switches on opposite sides of the LED in place, which the button is pressed, the indicated annealing operation. The battery compartment is a small opening in the device does not work. When transporting the battery housing is proposed to loosen the brain unit to avoid accidental ignition. The metal parts are made of polished aluminum.

The 4ml reservoir capacity, and walls made of clear Plexiglas through which to track the amount of fluid, and weight loss. As a center of the metal fabric tube. The metal tube of fabric due to capillary effect to absorb the liquid storage tank, which then made for the top of the tube is made ellenálláshuzalból felizzításának electric coil due to evaporation.

The device is regenerated at home, for renewal, you will need:

Metal Fabric Pieces
0.2mm diameter resistance wire
Clip
Gas Lamp
Small screwdriver

NGP Genesis

Heat Treatment
The 40 × 45 mm tissue piece of metal pipe to format, about 2.5mm in diameter, this heat-treated. The heat-treated metallic fabric upper hose reels at the end of the resistance wire. The resistance wire mounted on the central part of the brain tube to download the hole in the bottom of tank. Then, the two coils are fixed végdrótját bolts located under the brain. The recording of végdrótok particularly pay attention to it that the wire taut.

The refurbishment carried out correctly, there is no other job is like a needle hole formed in the fluid-filled, and the device is ready for use.

Disassembly of the device is to be developed to house the battery is always letekerésénél the switch next to the metal housing will, while granting an szipkának kazánpalást letekerésénél kazánpalást the next part of the Plexiglas tank to catch. The surplus kazánpalástot do not attempt to ask for a hot state, the thermal expansion of rászorulhat parts of the brain, the feszegetéssel damage the unit.

NGP Genesis (Mini)
Dimensions : 170mm (140mm) x 21mm Material : polished aluminum, clear acrylic plastic Battery : 18650 or 18350
Click to expand...

and

New technology it is possible to make at home renewed boilers. The electric cigarette NGP's two boilers can be restored to order. One is made ​​of a fiberglass bow with which the resistance wire to the glass fiber filaments around the reels and the other tissues of the metal guide tube with a finely woven metal fabric tube shape to format, and place the coil around it. Currently, the technology of the metal fabric tube boilers, Genesis renewed use.

The glass fiber is a regenerated brain built boiler is supplied with or affecting the brain may be mechanical switches. The boiler is renewed on the basis of a heat-resistant plastic boiler is located, two screws which hold the base ellenálláshuzalt a bow with glass fiber. The ribbon drawing some very simple steps (at the bottom of the preparation in the form of videos viewed ):


Bow

Bow first record step

Fixing the second bow step

Fixing third Bow step
Roll the glass in the desired amount (usually three-thread) a 18mm diameter cylindrical object (such as the NGP into the battery with a purpose) so as to be overlapped at one point in the fiber.
Pulled from the battery so that the fibers do not shift around.
Together in one end of the flat ribbon shape is obtained.
We are taking a guide wire, which is sufficiently robust to the resistance wire, not to lean forward, and we will add a horizontal ribbon.
An approximately 8 cm long piece of resistance wire, make the roll, it is important to us that the two end / face-down, straight ahead. Seek the appropriate setting is usually used to be four, but feel free to experiment with more or less well. The threads should be tight, even. The distance between the threads can greatly affect the taste, it should be noted. The finished, equipped bow slightly changed location of the threads later.
The glass fibers may extend the end cut off.
The renewed boiler loosen the two screws and then put upon the bow of the segéddróttal with resistance wire and the two ends of the two fixed screws. Let us make sure that the glass fibers do not tamper with the screw! It is also important that the resistance wire ends tight fix.
At this point the distance is not adequate, or even more threads megigazgathatjuk.
Justifying the bow so that it is positioned over the two screws and gently pull out the auxiliary wire.
Átbujtatunk a small piece of fiberglass bows and loops of the loop by a simple double knot, tie up top. The first node after a drop of liquid drops knots raising a lot stronger than the second, there will be stronger, it will not dissolve.
Megigazítás after projecting ends of the fiber bundle used to cut, if we leave half an inch, the node will definitely not dissolve. Cut off the protruding ends of the resistance wire as well.
Liquid completely wetted the knot, and put upon the cartridge or drip kiupakot and try it! You should try drippelve cartridge case before the final bow!
The bow can be used to regenerated boiler vatelines cartridge , fabric or metal tube arresters mounted boiler tank and use drip cap , in this liquid to drip like cup drippelt exactly the center of the bow knot will fall.
Click to expand...
 
martinc

martinc

Vaping Master
ECF Veteran
Verified Member
Dec 12, 2011
4,584
2,068
59
Montreal,Quebec,Canada
Last edited:
Status
Not open for further replies.

Users who are viewing this thread

Total: 3 (members: 0, guests: 3)
Top Bottom
Jump to latest Follow Reply
Jump to latest Follow Reply
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu