New Products 11/10/2012
SplitFire 3ml Tank with Replaceable Head
510 threaded SplitFire 3ml Tank
Will work on a 50 or eGo battery
The bottom chamber tank holds up to 3ml, the top chamber house the coil and they are separated by a metal plate with 4 drilled holes for the wicks. Each coil head has two 2mm wicks giving you four wicks that descend into the bottom chamber
You can replace both poly carbonate tanks and coil/wick heads. We have replacement coil/wicks available in 1.8ohm, 2.4hm and 2.8ohm, colors and replacement tanks coming soon.
The replacement wick is lace tipped to allow easier insertion into the base plate holes when replacing your wick.
You will receive one 510 threaded SplitFire Tank with 2.4ohm coil head and a chrome ming drip tip (a 5.00 free extra!)
It is REQUIRED that you both fill the bottom chamber AND prime your wick above the metal plate and allow time for the wicks to fully soak before vaping. You can vape right away if you have primed the top wick, but it is best to let thisd device sit for a short period of tuime to allow the wicking to get started
Comes with an easy to adjust slot head connector pin. You may need to adjust when screwing into your PV.
Measurements:
52mm without drip tip installed
74mm In height with Drip tip installed
20mm Diameter
Eric's Review:
Pretty darn awesome, the vape is one of the best I have ever had from a "tank" and this included the Vivi Nova. The included head does not have the lace tips so if you clean this one and remove it is a little tricky to get back in the holes. The replacement heads do come with the lace tips so it's much easier. Once this gets going it's a beast, I am very impressed, after I primed it I had one slightly dry hit, so I let it sit another few minutes and then.. nothing but goodness. I cannot stress enough that you MUST prime this, priming is just wetting the top wicks in the chamber, once they are primed the liquid will start wicking from the bottom a dry wick on top is a NO NO. Either prime your top wick or let it sit until you see the top wicks are wet.
Very good tank, easy to use. My only issue is refilling, it's not hard but he first time I did it I took off the top chamber to fill the bottom, it was slightly messy. I now use a syringe into one of the top holes and no more mess.
Overall, I am extremely pleased with this one.
I have the replaceable heads for them also in the new
Coil Head section in the side menu.
*******************************************
Wildfire VV -Variable Voltage Multi-size
Wildfire VV -Variable Voltage Multi-size
Two variable volt devices in one, the standard 18650 can transform into a mini usuing 18350 or 16340 batteries (do not stack batteries) by removing the extended middle part.
View the instruction manual here
Main Features:
High quality mechanical parts , copper and electroplated chromes and CNC machined.
Extended battery cup, you have variable choice of different kinds of battery 18650, 18350, 16340. Change to a mini!
Voltage regulation from 3.0V to 6.0V by 0.1V once button-pushed , vice versa.
The PCB circuit has full protection of low quiescent current protection，Reversely connected battery protection, over current and short-circuit protection.
Chipset working High efficiently keeps the output voltage which raises and drops accurate and steady.
LCD displays the present power level, output voltage, and connected atomizer resistance (ohm check) at different operation mode all from one button.
locking Mode.
Low voltage alert
Benchmark: Provari
Height:
98mm without standard extension section
129mm with standard extension section
Diameter: 21.8mm
Has a deep and wide opening well and Fits all CE4's, does not fit a T2 or T3 without an adapter
More manufacturer details: (from China, nt me hence the odd wording lol )
The Beautiful Mod Wildfire Battery Tube is another exclusive product invented by experienced engineers with many creations and ideas. It is totally new
different battery product among the already sold products.
The Beautiful MOD WildFire VV Tube consists of 3 parts- Main battery cup, Extended battery cup and end adaptor. WildFire VV is made from copper material
with the surface treatment of electroplating chromes. Also, from the hand feeling of weighty tube, its easy to know the high quality of the tubes raw material.
It is CNC machined battery tube.
WildFire VV has 2 cups for you to choose different batteries with different capacity in different diameter and length, such as 18650, 18350, and 16340. The
main cup is matched only with one 18350 or 16340, and 18650 needs the extended cup. Raising and dropping voltage Chipset has voltage regulation and
voltage magnification function, which is able to magnify 3.7V battery into 6V. You prefer different working voltage for different vaporizing feeling.
The hole at the end of end adaptor enhances batterys air cooling.
WildFire VV uses 510 and eGo atomizer connection, which can be matched with various kinds of cartomizers, atomizers or
clearomizers, such as 510 atomizer/ cartomizer, CE4, Riva-T, 3.5ml/6ml 510 DC tank, users can choose their own preferential one
based on different occasions or moods.
Silicone button touches wonderful.
LCD screen displays the present Power lever, Output voltage, and connected atomizer resistance at different operation mode. Auto
Power saving mode starts without using in 3 seconds. 3 continuous pushing within 1.5 seconds takes it into setting Mode. Should
theres no operation within 2 seconds, setting could be saved automatically and exit from setting Mode.
It has 5 operation Modes. Continuous pushing changes into different modes. While
regulating the mode you want, just push into the right number that the LCD screen
displays, and then stop pushing and wait for 2 seconds. It works as what you want.
Eric's Review..
Ok, me like, as good as any VMax/Lrider and has the same functions, not quite as heavy as the LRider Lambo made of stainless but functions properly and seems to be dead on accurate in the voltages, 3.0-3.2 is not a harshe vape like cough.. the ZMax.. cough
This is a very nice VV with the bonus of being able to use it as a mini without any extra cost. This is a good purchase, used it for a while now and the test unit will be used along with my Lambo.
*******************************************
LavaFire Mechanical Mod Multi-size
LavaFire Mechanical Mod with multi size options!
Very similar to the telescope mod with the bonus of two sizes in one..
.
1 100% mechanical design and CNC machined
LavaFire is made from copper material with the surface treatment of electroplating chromes. It is 100% mechanical designed and CNC machined without any PCB board inside the body tube, so is much more durable and lifespan is much longer.
2 No PCB board to avoid short circuit and breakdown
In order to make real high quality durable power supply device for electronic cigarette vaporizers, we dont use any PCB board inside of inner battery tube, only metal cups, caps, spring, insulations, please refer to LavaFire parts sketch. So there will be no short circuit and breakdown happened, no lifespan limitation, as you know all electronic components have lifespan.
3 Multi-choices for various kinds of batteries and voltages
The LavaFire is compatible with various kinds of batteries for different length. Below it is the list of battery cups and batteries, also different voltages to work with different resistance atomizer
Short cup: . . . . . . . . . . . 18350/16340 . . . . . . . .3.7V... regular or low resistance atomizer
Short cup + Extend cup:... 18650 . . . . . . . . . . . . 3.7V... regular or low resistance atomizer
Short cup + Extend cup:... 16340*2pc/18350*2pc . 6V... ..High resistance atomizer (be especially careful with this as voltage will be what you put into it, I do not recommend ever stacking batteries!)
4 Compatible with various kinds of cartomizers
LavaFire use 510 threading, so it can be compatible with all 510 threading atomizers, cartomizers and clearomizer, especially looks great with 510 DC tank
Also it can use 510-eGo adapter to work with all eGo threading atomizers, such as eGo-T, eGo-W, Riva-T, CE4, CE5, CE6
