New Product Releases

[gormly]

New Products 11/15/2012:

Kanger T3 Rebuildable Clearomizer - Red



Kanger T3 Rebuildable Clearomizer - Smoke



Kanger T3 Rebuildable Clearomizer - Blue


*****************


Kanger 510 XL Horizontal Coil Cartomizer - Stainless - 5 Pack



Kanger 510 XL Horizontal Coil Cartomizer - Black - 5 Pack



**********************


Go-go Batteries and cartomizers are back in stock, I got half my order so they are online now.

I also have a new eGo to Go-go adapter

eGo Battery to Go-go (thread cover)

 

[fourthrok]

Whoohoooo!!! Kanger cartomizers!!! YAY!!! Of course, I really wish they were 2 ohm or 2.5 ohm...but that's okay. Close enuff! Kangers have long been my favorite type of cartomizer. In fact, they were the ONLY ones I used for a long time! But when I started using LR more, I tended to go to the Smoktech ones because I could get 2ohm single coil (I am so done with dual coil it's funny).

 

[MikeE3]

no they are permanently attached. I didn't like it at first but love it now lol

hmmm! I'm not fond of XL size carto's / tanks, but I may just go for one of these as it is very good lookin'. Thanks for the answer.

 

[Dragoncqb]

I have long moved onward & upward but the Go-go was my first big battery after starting with the 808. I think I will always be a Go-go fan. Go-Go USA boy how your site has come of age in such a short time. Go-Go nation lol

 

[gormly]

New Products 11/16/2012:

DV CE5 in colors

With Removable and Changeable coil heads, drip tips and tubes

Not only are these Branded DV AND in colors but they are improved. There is a new spring electrode in the base which means it will fit anything it screws into. Usually this isn't a problem but with all the manufacturers putting out different eGo batteries, tolerances can be slightly off. This might cause you to screw down a carto tight on one ego and a bit looser on another, it can also cause problems with some batteries eventually not firing a certain carto consistently. The new spring electrode eliminates this. It literally is a spring inside the connector so it moves up and down.

The unanticipated bonus to this is you can slightly change the draw, if you need more air you can back the carto off a little and get more air, need less, just tighten it down and it will not harm or compress the battery connector. This air flow adjust may not work with every eGo battery but on what I have tested it's pretty cool. I was able to fire the DV CE5 backed off an entire turn!

IMHO This carto is better than any CE4, Vision 2.0, or Thor and I feel it is the best CE5 out there.

I realize I am biased here but I have tested many of these and we finally got to one I am really proud of. The spring electrode idea was sort of my idea. I am NOT saying I made it happen or someone else didn't come up with it first (I don't know it might be on other items, not sure) but when I had issues with my first run (that I rejected) I mentioned that the connector had to be a bit farther down and asked how they could do it, the manufacturer decided to put a spring in it. This is not in the Vision and as far as I know it is not in any other carto. The next batch of DV CE4's also have the spring.

These are also very clean, meaning it has a great taste pout of the package, no machine oil or muted tastes, nothing like that.

So, very proud of it...

They come initially in 2.4 ohms but all heads can be changed to whatever you need, 1.8, 2.4, 2.8, 3.2 and 4.0ohms
and you can get different colored tubes and drip tips to change the look.

DV CE5 Rebuildable Clearomizer Blue - 2.4ohms


DV CE5 Rebuildable Clearomizer Red - 2.4ohms

DV CE5 Rebuildable Clearomizer Yellow- 2.4ohms


DV CE5 Rebuildable Clearomizer Green- 2.4ohms


DV CE5 Rebuildable Clearomizer Purple - 2.4ohms


DV CE5 Rebuildable Clearomizer Smoke - 2.4ohms


I also have all the drip tip colors and colored tubes as well. all fit the DV CE5, Thor and Vision 2.0


Also, I have updated the Coil heads to match the correct items specifically.
The DV CE5 now have their own coil head section in the Coil Head menu item on the left.

There will be NO confusion as to what matches this CE5. You will need the "DV CE5 Coil Head"
Located here

 

[Barto]

Loving the colors!

 

[gormly]

Kanger T3 Bottom coil replacements are back in stock and I have plenty and double the amount coming soon along with more of the clear T3's Go-go and a lot more Kanger stuff.
Should have the rest back in two weeks. In the meantime if you need a T3 consider a color, I have red, blue (very nice) and light smoke




I have a new Stainless Griffin today.

I have posted a write up on it in the Griffin thread for more information. I am not sure if it is entirely stainless steel or not.







I do not have parts for it yet, no extra tanks, no metal tanks, nothing yet,. will post when I do.

************************

I also have a new dripping atomizer today and another coming tomorrow (scheduled)
The one I have today is the "Dream - BT801" I am pretty sure this is already out in the wild at other vendors.

It is like the phoenix but has an airflow controller on it (removable)

 

[Commie]

Woo!

The dream RBA -- is it a sealed connection? Would it be possible for someone to post pictures from the bottom of it or taken apart? Trying to see if it would be usable with bottom feeders.

Edit: Never mind -- a bit of google answered my question. It's sealed, and the positive post is too skinny to drill.

Thank you!
Commie

 

[bubbajoe72]

Is that a Pyrex tank on that SS Griffin or just thick plastic?

 

[MJBinNM]

...I have posted a write up on it in the Griffin thread for more information. I am not sure if it is entirely stainless steel or not...

I ordered one this morning. I'll post once I have it and let you know if I can determine what it's made of...

 

[Swarley]

Woo!

The dream RBA -- is it a sealed connection? Would it be possible for someone to post pictures from the bottom of it or taken apart? Trying to see if it would be usable with bottom feeders.

Edit: Never mind -- a bit of google answered my question. It's sealed, and the positive post is too skinny to drill.

Thank you!
Commie

I ordered one form another vendor a few weeks back and the center pin is actually spring loaded One of the features I really like about this "Dream"

edit: I can't say for sure that Erics is the same or not

 

[gormly]

Hydra and Tiamat are back in stock with some parts for them as well.

 

[Jourelem]

...I have posted a write up on it in the Griffin thread for more information. I am not sure if it is entirely stainless steel or not...

I ordered one this morning. I'll post once I have it and let you know if I can determine what it's made of...

I'm interested in knowing if they're completely ss, eager to hear your thoughts when you get yours.

 

[corpus]

Any reviews on the LavaFire Mechanical mod?

how does it compare to other multi sized mods?

Will one have to get the 510 to CV adapter or is it not necessary?

 

[dennis_j]

the griffin i got needs a lot of moding, orbetter quilty control, neg. screw threads were striped, tryed longer screw to see if there were any good threads,which there were none,ended up putting neg coil wire in neg screw hole than plug with tooth pick,works but not a 25.00 item, the phoenix clone is twice the unit at 1/4 the cost IMO..

 

[gormly]

New Products:

VISION Eternity Rebuildable Atomizer Kit

I said I wouldn''t get it but so many people asked me so I got 50 of them.





I also have a limited run of the Smoktech R-Tank - Chrome



The Vision Nano in 5 colors and clear:

Vision Nano Clearomizer

 

[AG51]

New Products:
I also have a limited run of the Smoktech R-Tank - Chrome

This is called something else....from some wheres else....I got some of these and I highly recommend them for the simpleness of them, the vape, and the flavor they have. You also have a MUCH nicer price on these so I will have to get some more from you

 

[Dieseler]

I'm interested in knowing if they're completely ss, eager to hear your thoughts when you get yours.

Same here MJ and thanks.

 

[MJBinNM]

See my post about the new Stainless Steel Griffin here

 

[Dieseler]

Thanks MJ
darn it.