New Projects by Atmomixani

[CannedWolf]

Any one know if there was ever a real copper nemi made?

Nope. There area total of 21 versions available: 4 SS versions, one full brass, and 5 mixed brass/SS versions along with 4 Eric's Editions and the anodized tubes in 7 (I think) colors.


Edit - listing to make sure I captured them all. Let me know if I missed any.
VW, Kalifan, Shined, Matte, Brass, Mixed Matte, Mixed Shined, vape Pit, Greek Vapers, Vaperev, Celeste, Amber, Terra, Granite, Black, Blue, Turquoise, Gold, Red, Purple, and Orange. Don't think I missed any colors...

 

[me1969]

ok thanks people on Fb was saying it was a limited run rose nemesis

 

[CannedWolf]

ok thanks people on Fb was saying it was a limited run rose nemesis

There is a windrose mod that did have a limited copper run if I remember correctly as well as a few other mods that have done similar limited copper runs. What group on FB? it isnt likely that conversation is happening on Atmomixani's page...

 

[me1969]

There is a windrose mod that did have a limited copper run if I remember correctly as well as a few other mods that have done similar limited copper runs. What group on FB? it isnt likely that conversation is happening on Atmomixani's page...

that's what I was thinking the windrose but a couple people swear their was a copper nemi IDK I believe you .It was vapers buy it sell it group . They wasn't selling btw the one was looking to buy one

 

[CannedWolf]

that's what I was thinking the windrose but a couple people swear their was a copper nemi IDK I believe you .It was vapers buy it sell it group . They wasn't selling btw the one was looking to buy one

Gotcha.

yea... they are mistaken (unless they are referring to an Eric's Edition Terra or Amber... I guess those could look copper-ish if they weren't paying close attention and those are definitely on limited release because they are hand colored/treated).

Loco69 can confirm but to the best of my knowledge, Atmomixani hasn't released anything in copper.

 

[Malefilipinonurse]

Atmomixani, Thank You.

 

[Texaslimo]

Da Iron Mod has a copper mod, and I think JD's has one also.

 

[Texaslimo]

Atmo is pretty fast! DHL says my 3D should be here tomorrow! Canned, come over here and let me hit you in the head with my bat... I need that Celeste NOW!

 

[Texaslimo]

just kidding, folks... No actual mods were harmed in the authorship of the previous comment

 

[posthumous]

that's what I was thinking the windrose but a couple people swear their was a copper nemi IDK I believe you .It was vapers buy it sell it group . They wasn't selling btw the one was looking to buy one

As I understand there isn't a genuine copper Nemesis. However, there is a fake/clone/replica copper Nemesis though.

There is also a one of a kind Nemesis, made to be auction off for the hurricane relief in the Philippines. I can't recall the material. Guessing it was gold plated ss with a unique engraving

 

[Loco69]

Nope. There area total of 21 versions available: 4 SS versions, one full brass, and 5 mixed brass/SS versions along with 4 Eric's Editions and the anodized tubes in 7 (I think) colors.


Edit - listing to make sure I captured them all. Let me know if I missed any.
VW, Kalifan, Shined, Matte, Brass, Mixed Matte, Mixed Shined, Vape Pit, Greek Vapers, Vaperev, Celeste, Amber, Terra, Granite, Black, Blue, Turquoise, Gold, Red, Purple, and Orange. Don't think I missed any colors...

He is always faster than me...

No copper Nemesis has been made...

 

[Loco69]

As I understand there isn't a genuine copper Nemesis. However, there is a fake/clone/replica copper Nemesis though.

There is also a one of a kind Nemesis, made to be auction off for the hurricane relief in the Philippines. I can't recall the material. Guessing it was gold plated ss with a unique engraving

This is made by us
It is made only once and wont be remade
It is this one
https://www.facebook.com/media/set/?set=a.393585297440017.1073741864.140771692721380&type=3

Only the cost of the gold plated parts is 150 Euro..as much as costed to us with no profit, it is also made by Michalis and Eric together.
And will be auctioned for the Philippines
We will not sell any like this..It is once in a time edition for a good purpose

 

[CannedWolf]

Atmo is pretty fast! DHL says my 3D should be here tomorrow! Canned, come over here and let me hit you in the head with my bat... I need that Celeste NOW!

You're in luck... I'll be in TX for work at the end of January. Though, I won't have my Celeste with me

 

[CannedWolf]

This is made by us
It is made only once and wont be remade
It is this one
https://www.facebook.com/media/set/?set=a.393585297440017.1073741864.140771692721380&type=3

Only the cost of the gold plated parts is 150 Euro..as much as costed to us with no profit, it is also made by Michalis and Eric together.
And will be auctioned for the Philippines
We will not sell any like this..It is once in a time edition for a good purpose

it is a gorgeous mod for sure. That is one to try to snag

 

[CannedWolf]

He is always faster than me...

No copper Nemesis has been made...

Only faster because of timezones... and because I spend too much time on the forum

 

[CannedWolf]

I will post a better pic later (camera is charging) as this one is kind of crappy. However, it is an updated family portrait (I am only missing some drip tips and parts from my collection I think)...

All cleaned and ready for rebuilds




From left
69 Erics Edition (V2), 3D brushed
Nemesis Vape Pit, 3D brushed
Nemesis Celeste, Loki brushed (with Sophia)
Nemesis Granite, Steam Machine Dripper
Nemesis Terra, Loki polished (diver v2)
Nemesis Vapor Wall, Dome brushed
69 Erics Edition (V1), Dome brushed

Front
Steam Machine VST
69 Brass Kit (V1)
Blue Nemesis Anodized tube


I may have too much stuff... (not pictured: Poldiac CW, Templar, Wizard's Apprentice DNA20, Billet Box, 2X VMOD, 4 ePipeMod pipes, Damascus Mojlnir, Kayfun, Kayfun Lite, Kayfun Lite Plus, Squape, Taifun, Omega, Spheroid, and 2X Promety... and have a Microstick coming). Might need to get rid of a few things >.<

I still think I want to get a Nemesis Amber to round out the collection... and then there is the Nemesis Mini coming soon too... and the Striker... and whatever else Michalis and Katerina have in store for us

 

[Higel3390]

I must say this is a MERRY Christmas!
1x 3d dripper Matte
1x 3d dripper Shiny
Nemesis Magnet upgrade kit
Stealth Cap
Long Top Pin (for kick ring)
some extra wick and wire
1x tree ornament
and some killer Christmas Packaging.

Thank you to Katerina and Mixalis for being a part of my journey!

Have a Happy New Year!

 

[Texaslimo]

Have the 3D set up with dual coils and hemp twine. It is working nicely! So much a better buy than that other dripper that I just sold. Great Job!
Note: That last dripper previously mentioned was an expensive and pretty sexy piece that I sold not too long after I got it, in part due to the fact that it didn't work any better than my $15.00 IGO-W. The 3D will be a permanent part of my collection. It is well built and the design is truly innovative. A one of a kind!

 

[BluSwatch]

I just got my 3D and can't wait to build it .... anyone know how much juice it holds?

 

[Higel3390]

I just got my 3D and can't wait to build it .... anyone know how much juice it holds?

Using dual coils with organic cotton balls I think I have almost 3ml in it. The tank by itself holds 1.5ish.