NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

[rbonie]

i cant honestly tell anyone to buy these, im sorry.
ill give away all the ones i have but they wont be of any use unless your modding it and thats if you can get it to work properly.

the e2 was never an issue like this and we can fix the e2 in 2 minutes flat and make it the beast it is.

Whado u need to send me a couple. Would like to try a thing er two on em. . PM me with instructions.
Bonie

 

[rbonie]

Are you actually using them right of the box or are you washing them out first? I find you HAVE to do that as more than half of them still have somethign nasty in them and when you wash them out you pull the filler ring and when you pull the filler ring good luck in getting it seated back properly and if you don't seat it back properly and/or leave the filler ring off good luck trying to fill/re-fill one in a non-syringed mod, trying to eyeball your fluid so it doesn't encroach the cup slits, etc., etc....

I went to my pharmacy last night and they don't have 3 ml BD's, just 5ml....If this tankomizer isn't goign to work I am goign to have to find some or some terumos or monojects and have a syringe mod fabrication party for sure...and be cool bad if you can get some of those ptb's you were designing out. Whatever happed with CoV?

goto amazon
Amazon.com: Becton-Dickinson 3Ml Syringe Only With Luer Lok Tip - Box of 100 - Model 309585: Health & Personal Care: Reviews, Prices & more
Becton-Dickinson 3Ml Syringe Only With Luer Lok Tip - Box of 100 - Model 309585 $10.89

 

[dannoman]

I wonder if those are a proper inside diameter? I do know the BD 3ml's work pretty good though a bit of a pain to get on but onces its on it isnt goign anywhere....the Terumos and monojetcs are a bit more forgiving yet still give a prety good seal from what I have heard/seen...

Thanks for the link - the price is def right...

edit: wait those are BD's lol - sorry and thks again...

 

[rbonie]

Tib, I do have a bottle mod and a syringe mod

but I just go through E2s so quickly, the wicks don't last more than a couple days
I just about ran out of them, and I'm not sure when they'll decide to make bigger
ones, so I'll have to keep modding them. But sure, stop by and bring yours
and I'll gladly help you mod them.

Take ptb and roll it like a joint only really tight. hang enough down both sides to reach bottom of well and push the stuff on top down into the cup slots. never mind the wick. this works!!

 

[rbonie]

I'm having great luck with the 3Ω R4 shorties, but with the filler ring out I'm constantly having to remember NOT to lay it down flat. If I could come up with a simple leak-stoppage method (aside from PTB) that didn't impede wicking I'd have this thing licked.

if you use the middle ring pushed in just barely from the top they won't leak laid flat. Just be sure to blow in the drip tip before you hit it again or you get a mouthful.

 

[dannoman]

Good link for monoject 3ml syringes @ .15 each and free shipping (order any amt you want). I ordered 20 for three bucks and ships free:

Healthcare for Ferrets: Monoject Syringe without Needle for Ferrets at Drs. Foster and Smith

 

[Katya]

Yeah, provari is the new variable voltage device with a micro processor and digital display built right into it, and only uses one battery, for a voltage range of 3.3v to 6v, uses some sort of booster chip, no pot, just hit the fire button 6 times and it brings up the menu setup on the digital screen to adjust voltage and change settings, it looks pretty bada** except for the 150 price tag. uses 18500 or an optional extended endcap for an 18650. ProVape Electronic Cigarette Battery Mods, Atomizers and Accessories

It looks a little like a new and improved Buzz. Do you guys think it's better than the Buzz? I've been waiting for a nice looking varivolt mod... The price is steep, but if it could replace all the batteries that litter my desk, I'd buy it in an instant. What's the connection on this device? It says on the site that it comes with a 510 adapter? Will it work with, say, kr808 or 4081 adapters?

 

[BanjoMan]

if you use the middle ring pushed in just barely from the top they won't leak laid flat. Just be sure to blow in the drip tip before you hit it again or you get a mouthful.

It's not the juice above the cup I'm worried about - it's the juice that gets into the air tube. There's nowhere to blow that (except out the bottom of the carto into the connector).

 

[VV Vapster]

Good link for monoject 3ml syringes @ .15 each and free shipping (order any amt you want). I ordered 20 for three bucks and ships free:

Healthcare for Ferrets: Monoject Syringe without Needle for Ferrets at Drs. Foster and Smith

Thanks for that! just put in an order for 40 at $6! Sweet! And for anybody who is wondering, 3cc is the same as 3ml.

 

[VV Vapster]

It looks a little like a new and improved Buzz. Do you guys think it's better than the Buzz? I've been waiting for a nice looking varivolt mod... The price is steep, but if it could replace all the batteries that litter my desk, I'd buy it in an instant. What's the connection on this device? It says on the site that it comes with a 510 adapter? Will it work with, say, kr808 or 4081 adapters?

Don't know if it's better than the Buzz, it's not out til sometime in December. Not sure what atty connection it comes with, I'd imagine when it actually comes out, you'll be able to choose.

 

[Katya]

Don't know if it's better than the Buzz, it's not out til sometime in December. Not sure what atty connection it comes with, I'd imagine when it actually comes out, you'll be able to choose.

Thanks, Vapster. Looks promising.

 

[v1John]

Take ptb and roll it like a joint only really tight. hang enough down both sides to reach bottom of well and push the stuff on top down into the cup slots. never mind the wick. this works!!

Thatnks for the tip, I'll try that soon. This works on the 3ml BD-mod? about a whole pyramid per side?

 

[v1John]

rbonie I'm thinking of something like part # 85385T884 ( <--you can copy and paste the # on their 'find' box )

it's woven (wire cloth) so I'm wondering if that's what works best
keep us updated on what you find out too, and what part #'s you consider

 

[GenMan]

My go at the syringe mod. Used a baby medicine dropper instead though since it was a closer match to the diameter of my ego. I have thinwall polycarb tube on order that will match the ego and let me fill the connector area with the tube. With that and a custom delrin tip I should have a nice clean looking system by Turkey Day that holds around 2.5ml.

 

[dannoman]

I don't know how they make out on that lol- probbly a loss leader or break even for their vet customers...

Thanks for that! just put in an order for 40 at $6! Sweet! And for anybody who is wondering, 3cc is the same as 3ml.

 

[dannoman]

nice.......

My go at the syringe mod. Used a baby medicine dropper instead though since it was a closer match to the diameter of my ego. I have thinwall polycarb tube on order that will match the ego and let me fill the connector area with the tube. With that and a custom delrin tip I should have a nice clean looking system by Turkey Day that holds around 2.5ml.

 

[dannoman]

It seems nice but it looks flimsy to me, cheap...I hate to nipick, just sayin'...maybe they need to hire a new photographer...

It looks a little like a new and improved Buzz. Do you guys think it's better than the Buzz? I've been waiting for a nice looking varivolt mod... The price is steep, but if it could replace all the batteries that litter my desk, I'd buy it in an instant. What's the connection on this device? It says on the site that it comes with a 510 adapter? Will it work with, say, kr808 or 4081 adapters?

 

[dannoman]

You are counting on the ptb to unroll a bit once its in there? Do you cut off the wicks with this and how much of the PTB do you use on each side...

Take ptb and roll it like a joint only really tight. hang enough down both sides to reach bottom of well and push the stuff on top down into the cup slots. never mind the wick. this works!!

 

[badkolo]

You are counting on the ptb to unroll a bit once its in there? Do you cut off the wicks with this and how much of the PTB do you use on each side...

it doesnt have to unroll if you crimp it shut

 

[Tim the Enchanter]

see bad you even have insects waiting...

What do you mean, gotlogos?

Tim