• Need help from former MFS (MyFreedomSmokes) customers

    Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?

    View thread

NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

Status
Not open for further replies.

br5495

Old Man Resting in Peace
ECF Veteran
May 24, 2010
3,061
2,049
87
Liberty, Texas
Well this batch just keeps getting worse and worse. The 2nd one was just as bad and the 3rd and 4th looked like this.

What the hell is this crap on the outside? If that is what it looks like no wonder they taste like crap!

It's the same as always. They take one step forward and two steps back.
 

Gummy Bear

Vaping Master
ECF Veteran
Oct 10, 2010
4,733
11,947
orlando fl
agummybear.deviantart.com
@BR.
Could you smurf up a link to that video for me 'ol buddy, 'ol pal?
Or to anything else with a top coil for that matter. I can always make a new tank if needed.

I tell you I have given up on these. and that is saying a lot. I gave up on the Genisis a lot quicker.
 
Last edited:

br5495

Old Man Resting in Peace
ECF Veteran
May 24, 2010
3,061
2,049
87
Liberty, Texas
@BR.
Could you smurf up a link to that video for me 'ol buddy, 'ol pal?
I tell you I have given up on these. and that is saying a lot. I gave up on the Genisis a lot quicker.

Oh golly. I don't remember where I saw it. It was an earlier version that had a separate seal for the tank. The vapor looked better than the other types I've seen.

I can't give up on mine yet. So far I haven't seen anything that works as well. But then, I have not built a Genisis, so can't say about them. I have the right stuff to make one, but I'm like you. I believe I would have a problem with condensation.
 

zoiDman

My -0^10 = Nothing at All*
Supporting Member
ECF Veteran
  • Apr 16, 2010
    41,136
    1
    82,601
    So-Cal
    It's the same as always. They take one step forward and two steps back.

    I think that should be the MiT/RS slogan. I would trademark and sell it too Martinez if I was you Br.

    Man, if that crap is on the outside of the carto's, you have to wonder what is on the inside?

    I wonder if MiT/RS ever thinks that people are actualy putting these things in their mouth? And that the juice inside them goes in our lungs.
     

    Turbo

    Ultra Member
    ECF Veteran
    Verified Member
    Oct 23, 2009
    2,888
    417
    Southeast/USA
    How was filling it? I heard that the early tests with the first seal design showed that filling was a bit of a hassle.

    Filling was easy enough but that ring was tough to get out. I guess GotVapes fixed that part of it anyhow w/ the all in one piece.

    As I said, no off taste on the one and only that I have; no cleaning/dry burning. It has since sprung a leak so I'll have to investigate modding when I have time.

    The bottom coil is cool but I haven't had the need to try a dry burn yet.
     

    haft2doit

    Super Member
    ECF Veteran
    Apr 8, 2010
    640
    121
    erie, PA
    What gauge metal needle would work to replace the crappy plastic one that comes with e2s? I'm going to try filling with a needle on a bottle in place of pulling the plug. The clearos with the single fat wick seem to work ok without removing the plug and putting back upside down. They are getting closer to being useful out of the box...like a product designed to do something should :)
     

    Turbo

    Ultra Member
    ECF Veteran
    Verified Member
    Oct 23, 2009
    2,888
    417
    Southeast/USA
    What gauge metal needle would work to replace the crappy plastic one that comes with e2s? I'm going to try filling with a needle on a bottle in place of pulling the plug. The clearos with the single fat wick seem to work ok without removing the plug and putting back upside down. They are getting closer to being useful out of the box...like a product designed to do something should :)

    20 or 21 gauge work well w/ the original filler rings; haven't tried the new ones yet.
     

    kwcharlie

    Ultra Member
    ECF Veteran
    Apr 24, 2009
    1,213
    605
    75
    Houston
    acrigs.com
    20 or 21 gauge work well w/ the original filler rings; haven't tried the new ones yet.
    The new "fat wick" inner ring is soft enough to take about any gauge, just have to force it harder. I aggree about the fat wicks, working GREAT with no mods on the rings or wick, now about those clear tubes...........let's just say now have a use now for all those 3ml syringes and single side razor blades.
     

    tiburonfirst

    They call me 'Tibs"
    ECF Veteran
    Verified Member
    Feb 23, 2010
    26,879
    249,535
    Man, if that crap is on the outside of the carto's, you have to wonder what is on the inside?

    I wonder if MiT/RS ever thinks that people are actualy putting these things in their mouth? And that the juice inside them goes in our lungs.

    still vaping with 2 e2s i got clean and working decently but still having problems with going back to analogs. now i found this:

    http://www.e-cigarette-forum.com/forum/new-members-forum/179866-woot-29-99-mod-kit-found.html

    and ordered. mystified how different batteries can change the voltage. could somebody take a look at the above thread and explain? thanks, guys!!!!
     

    Gummy Bear

    Vaping Master
    ECF Veteran
    Oct 10, 2010
    4,733
    11,947
    orlando fl
    agummybear.deviantart.com
    But doesn't their "Krystal" have a nicotine rating of 36mg? that should do it. Anything less than 18 would make me have a fit. But 36 was stronger than the analogs (for me) I went from 36 to 24 then down to 18 and straight back to 24. I can do 18 now but I doubt I could go below that.
     

    Quick1

    Ultra Member
    ECF Veteran
    Feb 11, 2010
    2,684
    280
    USA
    I'm confortable with anything between 26 mg and 36 mg. 32 mg seems to be the sweet spot but I have to find 36 first and then cut it with vg. Big pain. Cignot is the only reliable source I use for VG Dakang juice and they only go to 26. It works fine but I vape a bit more than is convenient.

    Tib, I just sort of glanced at the thread... First thing that came to mind was "if it sounds too good to be true...". I'll be interested in hearing your report. The page I scrolled through was pretty much one guy hyping it hard (I've seen that happen before :)). It's apparently dropped in half on price? Could be a reason for that... maybe it's just the form factor. CR123's are about the same diameter as an 18650. Connector type?

    CR123 is a form factor. Most are Li-Ion. Some are lifepo4? Different chemistry can be approx 3v or 3.7v (a Li-Ion cell is a 3.7v nomimal). They also have some (Tenergy) 3.7v Li-Ions that are regulated to 3.0v. Is that what you're asking? You do want to make sure the batteries you use are protected batteries. That they have a circuit that will cut them off in case of short, over max discharge rate, or under charge.
     

    tiburonfirst

    They call me 'Tibs"
    ECF Veteran
    Verified Member
    Feb 23, 2010
    26,879
    249,535
    i'll make sure i report back - also, i think there were plenty of others who ordered so feedback should be forthcoming. apparently my order was filled last night, imagine it'll go to the po today since tracking was provided.
    i had very bad luck with the ego batteries from danno and can't justify spending that amount of money again
     
    Status
    Not open for further replies.

    Users who are viewing this thread