NEW RoyalSmokers C-E2 R4 Review, Tips, Info, Help, Video

[BanjoMan]

Well at least I finally know where my e-liquid.cn order is. It hit U.S. Customs this afternoon at 4:00.

(anybody else getting nic drunk on the br mod?)

 

[v1John]

these people need to just make a much wider e2 and be done with it, we know it works so now its crunch time.

all that needs to be solved is the inner plug design so it doesnt leak upside down.

Well we're not sure of that yet, so far Br has proof that the 20ml bottle works even better than the Br mod, I'm going to have to try that one soon. (Yes we do need to read his posts )

Also, a cup lid may work against the wick (possibly).

 

[badkolo]

i mean to be honest v1john, they dont have to do anything and im not going through that headache again and this mod is just fine for me, i can use it for a week and chuck it out and start a new one, its cheap and easy enough that i have enough to satisfy me for the next 3 years.

i dont need to huge 20ml bottle since the 6ml is small and cute and does the job effectively and still hold 3ml of juice which lasts for hours and hours of heavy use.

 

[v1John]

8-o I need more cartos though hahaha.

 

[v1John]

Or air stems, whatever they're called


(What ARE they called anyway? Br-moderizers? Badkolo-Br-mini cartos?)

______
edit to add:
but if you want to add the lid and stop the upside down leaking for some reason, then
the double-bottle with threaded openings on both ends that I mentioned earlier should work perfectly, think about it, on the mouth end you would have the identical opening ready for a hollow carto with a silicone cup lid and then the vapers who want it upside down would have no leaks.

 

[br5495]

Here is one that does not leak in any position. It is a crude arrangement and nothing near what I finished product would look like. It has a br filler tip that seals the cup and a rubber grommet that seals it to the bottle. In use, it does not fill the bottle with vapor and is not a cool vape. The heat is about like any other E2. It wicks well and produces a bit more vapor than I expected. Possibly it will wick well enough so that various voltages can be used. This is an XL with a 2.5Ω coil.

 

[BanjoMan]

I just showed my mod to my wife. She just laughed and walked away...



Edit: br, no cool vape? That's what I like about this mod.

 

[badkolo]

Here is one that does not leak in any position. It is a crude arrangement and nothing near what I finished product would look like. It has a br filler tip that seals the cup and a rubber grommet that seals it to the bottle. In use, it does not fill the bottle with vapor and is not a cool vape. The heat is about like any other E2. It wicks well and produces a bit more vapor than I expected. Possibly it will wick well enough so that various voltages can be used. This is an XL with a 2.5Ω coil.

i knew you where hiding the goods, at least your wife wont be shocked when i lure you out the house with cheetos and kidnap you

 

[v1John]

yes, Br, I just edited my previous post at the same time.
All we need is the double-eneded bottles made for us...

...but it's true that the amount of vapor will likely decrease,

 

[v1John]

Br, if you cut holes on the drip tip would the mod regain vapor production?

It's important to know, because with the double ended bottles, the carto at the mouth end could then get vapor-ventilation holes inside the bottle, and then when it's time to put it down or away for a while, it's just as simple as removing the carto and screwing the cap on the bottle at the mouth end.

Or can you put vapor-ventilating holes on the drip tip and still get no leaks when it's laid flat?

 

[br5495]

I just showed my mod to my wife. She just laughed and walked away...



Edit: br, no cool vape? That's what I like about this mod.

I like the cool vape too, but didn't you read what I said about the compromise in my earlier post? You kids just don't pay enough attention to what I tell you, heheh. I ain't through thinking yet, so maybe I can come up with something.

My wife didn't laugh and walk away. She stayed here and laughed at all the ones on this forum.

 

[nickf41680]

after further review of my bottle mod I feel like the first initial vape is great.... Great flavor TONS of vapor!!! After f
That it seems to taste burnt.... This is on my ego with a 2.5 ohm r4.... I have yet to try it on my buzz... I'd Luke to lower the voltage. Tad I think.... The wick is staying totally saturated.......hmmmmm

 

[BanjoMan]

I like the cool vape too, but didn't you read what I said about the compromise in my earlier post? You kids just don't pay enough attention to what I tell you, heheh. I ain't through thinking yet, so maybe I can come up with something.

My wife didn't laugh and walk away. She stayed here and laughed at all the ones on this forum.

Well keep thinking, but I think you've already nailed it. I agree with bad - for a desktop or use-around-the-house mod this one fits the bill quite nicely. It's cheap and easy to make, vapes perfectly and lasts a long, long time. I have my XL mod on a 1800 mAh box mod so I might FINALLY get an entire day out of something without having to fudge with it.

 

[v1John]

this is what I mean Br
would this address all the issues?

 

[br5495]

One thing that I failed to mention. What I have in mind is not what you see in the photo. It was just made from stuff on hand. The version I am thinking about will run a tad cooler. I'm not trying to think of something that we can mod and play with. I'm trying to think of something that can be manufactured for the masses.

 

[badkolo]

Nick how in high heavens are you getting any burnt taste, im able to crank the voltage on this mr mod with no issues at all.

unless its your juice

 

[br5495]

this is what I mean Br
would this address all the issues?

I believe those holes will either leak juice into the cup or your mouth.

 

[v1John]

It's already good for the masses,lol
but I guess you can also think of something for the little masses who don't want upside down leaks hahaha


___
Br, no it's no different than what we have now.
but yes it would leak upside down
...I was trying to solve the missing vapor thing

 

[br5495]

Nick how in high heavens are you getting any burnt taste, im able to crank the voltage on this mr mod with no issues at all.

unless its your juice

I was crazy enough to go up to 6.3 volts with one of mine. Wouldn't try that with the XL that I am using now, tho.

Are we still having fun, Turbo?

 

[arjay55]

br-mods for all occasions

1. badkolo's glass-blown br-mod collection - coming soon

2. At the game - swap out the pepsi for 1 or 2 br mods - comes with handy extra length 'tube tip' for sharing

3. For turbo, banjo and the rest of you musicians - have that mod right there on stage!

j/k