New to vaping. What should I get?

[PLANEX]

I have read up on vaping mostly watching videos on youtube to get to know more about it and I wasn't sure which one to get. I had my eye on those box mods and the ones with the tanks where I could replace the coil and wick on my own without having to spend more on those parts. I assume those will last longer and I would only have to spend on e-juices?

Thanks in advance

 

[Sir2fyablyNutz]

If you're interested in tanks where you can replace your own coils and wicks then I would recommend the Kanger Subtank Mini. It can use either factory coils or rebuild on the deck. Even the older style OCC factory coils can be rebuilt. You would need a mod (battery) of at least 30 watts (recommend 50 or more) to power it.

Aspire just came out with the Triton tank, which has a build deck. I have no experience with it, but it looks really nice. I would also recommend a powerful (50w+) mod for this tank.

As to juices, the forum has a large DIY section to make your own juice.

Good luck in your choices.

 

[louie325]

i wouldnt waste time and money and those cheapo ego kits
i would go with a istick 30w or 50w and a subtank mini not super expensive and leaves plenty of room to experiment if you wanna use the stock coils or doing your own coils with the rba section
i had a mvp 2.0 (10W) and a protank 2(cheap i know) for over a year after getting a istick 50w and the subtank mini it was a new exp of its own ill never go back to anything less

 

[DaveSignal]

OP, if you want to start right out rebuilding your own coils and doing your own wicking, it's even easier to rebuild a dripper than it is to rebuild a tank. And you get better flavor + better airflow options. An RDA is worth considering.

 

[nyiddle]

I have read up on vaping mostly watching videos on youtube to get to know more about it and I wasn't sure which one to get. I had my eye on those box mods and the ones with the tanks where I could replace the coil and wick on my own without having to spend more on those parts. I assume those will last longer and I would only have to spend on e-juices?

Thanks in advance

As @DaveSignal said, it sounds like an RDA is the right path for you. There is a slight learning curve compared to a tank with disposable coils that you can just fill & go, but the work is well worth it. With the supplies I have on hand (wire, wick, juice) I could easily go a year or two without purchasing anything -- a comforting thought in the event of a vapeocalypse.

For first devices the iStick 30W is definitely a good place to look. I'd recommend the 50W but some people reported technical issues in the beginning (although that seems to have tapered off). If you're looking for more power straight away, which may prevent having to upgrade in the future, I'd say skip the iStick and jump straight to something like the Sigelei 150W. 150W is more power than most people ever need, but it's nice knowing that the power is there if you want to try and utilize it. My Sig150 is pretty much my daily driver, and with 2x 18650 batteries it easily lasts all day.

In terms of what RDA to buy there are literally thousands of options, all of which have their own pros/cons. Something like a Patriot RDA is pretty simple and good for a first-time builder. The Twisted Messes RDA is also a really nice authentic RDA (at a decently low price) -- it offers every feature any high-end atomizer will have. Alternatively, there are a load of clones which work fantastically (at a fraction of the cost of their authentic counterparts). I have a Tobh clone as a stand-by, but other options would be things like the Dark Horse RDA or a Plume Veil clone (though I hear mixed reviews). The Derringer is also good, but it's a bit tougher to build on given the reduced chamber.

Anyway, I'm sure plenty of people will chime in with loads of conflicting recommendations. The more you can tell us about your budget/what kind of experience you're looking to get, the more we can narrow down our recommendations.

 

[dcfluegel]

if you leaning towards a tank with a rebuildable option, the kanger subox is an excellent starter setup, in my experience - only real downfall there is the 510 connector seems a little finicky with some other toppers (works amazingly well with subtank mini (and one is included if you get the subox kit)) but some of my other tanks/ rdas don't seem to make a good connection and the pin is not adustable on the mod (lots of rbas/ attys have adjustable pins though) - for me, not an issue as i use that device with kanger subtanks specifically - may be worth taking a look at

and welcome!

 

[suprtrkr]

Rebuilding is definitely easier to learn on a dripper than in a tank; the deck is bigger. No, the coils and wicks probably won't last much longer than the replaceable kind, but they're cheaper to replace. I think you're going to want at least 30 and probably 50 watts of power. You may want a mod that has TC capacity as well, even if you don't intend to use it immediately. I think it's the coming thing. Then get a tank that has both +ohm and subohm coils, as well as a rebuild deck, like the Sub tank or the Triton, and a cheap clone dripper to learn how to build on.

 

[TubbyECF]

i wouldnt waste time and money and those cheapo ego kits
i would go with a istick 30w or 50w and a subtank mini not super expensive and leaves plenty of room to experiment if you wanna use the stock coils or doing your own coils with the rba section
i had a mvp 2.0 (10W) and a protank 2(cheap i know) for over a year after getting a istick 50w and the subtank mini it was a new exp of its own ill never go back to anything less

If he's interested in sub-ohm vaping, the eGo One may be a good start (or the new JoyeTech iJust2).

The iStick 30 and the right tank will be a little more though but provide you with much more options to experiment with different wattages.

 

[PLANEX]

RDA means I have to drip every time I want to vape? How good is the Kanger Subox Mini Starter Kit?

 

[djsvapour]

Today, I am vaping using a Sigelei Mini and Subtank Mini... using the RBA coil.

Best of most worlds if you ask me, as I don't need more than 30w... or 20w... or

 

[edyle]

RDA means I have to drip every time I want to vape? How good is the Kanger Subox Mini Starter Kit?

There are small rda's. (like 14mm diameter)
Most rda's are 22mm.
Many rda's have a pretty deep drip well - basically an open well, not a closed tank.

I use 30mm veritas rda's, and I was vaping side by side with a chain smoker, he'd have to light another cigarette before I'd would need to add more eliquid to my rda.
My 22mm aris has a deep drip well and also lasts along time between refills

 

[suprtrkr]

RDA means I have to drip every time I want to vape? How good is the Kanger Subox Mini Starter Kit?

Yes and pretty good.

 

[djsvapour]

RDA means I have to drip every time I want to vape? How good is the Kanger Subox Mini Starter Kit?

Good... yes! What makes it a good "starter" kit is the total flexibility for me.
Flexibility not offered by either the Kbox or the eGo ONE.

 

[RavenousPathogen]

Check out Super_X_Drifter on here, he'll getcha straight

 

[Baditude]

You need a battery device (ego battery or "mod") to supply power to atomizer (juice delivery device), a charger for the batteries, and e-liquid.

If you use something other than a rebuildable atomizer (you make your own coils & wick), you'll also need replacement coil heads (clearomizer) or additional cartomizers.

Although I currently make my own coils and wicks for rebuildable RDA's & RTA's, I didn't start rebuilding for a couple of years. Buying this type of juice delivery device (rebuildable) when first starting out vaping probably isn't a wise idea. There's a LOT to learn and understand, and it may take a while to perfect your rebuilding skills. You need something simpler to use while you learn.

Proper Terminology: Juice Delivery Devices

A Good Starter Setup for a Beginning Vaper

Advancing Up the Vaping Ladder

Information Resources for Your First RBA​

 

[RavenousPathogen]

Luckily, there's an ungodly amount of tut vids on youtube these days. First order of business when rebuilding coils is getting an Ohm reader. I see a few of the new boxes coming out now have a pause type function on the switch so that it'll show the ohms of the build without firing. I would however, still get an ohm reader first and watch lots of vids. Another way to learn is go to a reputable vape store and talk with the staff on hand, if they seem knowledgeable, maybe they can show you first hand how to go about getting into the finer points of building and what to build on.

However, I think Baditude in the post above has it pretty much down with what was stated and the links given.

 

[saigonshredder74]

i use a kanger subtank mini, but the other day my new friend Eric bought the Herakles by Sense. Man that tank is awesome. he put max vg and cranked his mod past 60 watts easily. no dry-hits. he burned through the juice super fast. It's design allows higher wattage. i am using the re-buildable atmoizer in my subtank mini. the OCC prebuilt coils were okay, but if not careful, will produce dry-hits. they just can't handle very well over the long run which is why i use the re-buildable option for my subtank mini.

 

[RavenousPathogen]

I quit buying anything new in the range of these sub-ohm tanks, last one I bought was the Lemo. Anything I buy now is probably going to be in the Squonk Category.

 

[Freaak]

I started off with a istick 30w and an Aspire Atlantis. Loving it. Just received a subtank mini. Slowly getting into the rebuildable portion of vaping.

 

[PLANEX]

Thanks again for the suggestions. I would probably get a decent mod and get at least 1 RBA and RDA.

The rebuilding tutorials on YouTube looks pretty manageable.