New Wood, Acrylic and Tru Stone Drip tips

[spartanstew]

Is this Ming style something that can be made to order? If so, how would it be designated?

 

[kdayspring]

thank you aj...I have put alot of time and thought into this...I really hope this gets things moving in the right direction. Any help ANYONE can give/spread is greatly appreciate more than you know!

even though these are semi custom, I am going to allow the use of my "BULLYDISCOUNT" coupon for now....

Hmmm..."bullydiscount" doesn't work -- it says it expired on Oct 14.

 

[SlaughterhouseV]

Also will mokume gane and damascus be available in the made to orders as well?

 

[Uno mas]

It appears once you select the material type the next page has a drop down for style, I get it, was a little lost at first

 

[SlaughterhouseV]

Uno - At this time I don't really care about micro coils but who knows. I also have heard a lot of great things on the Russian and the Russian 91%. A couple of things to be careful of, like filling but leaving some air in the tank and making sure things are tight. But certainly love the way the 91% appears to be done cloning the lite and yet giving it airflow control. I really like the way the XPV units look. Squared and different but have heard very good things on the build.

 

[SlaughterhouseV]

Disregard previous question, I see it's split out from Tru Stone, Composite and Glow Stone. Tired eyes over look things heh.

 

[Stonefather]

yes...Ill work on that guys..thanks for bringing it up..The first page is there only as a guide..you then select the subcatagory you want to order from

 

[Stonefather]

if there is any other small glitches please let me know..I have been working on this for a little too long it seems

 

[Uno mas]

Uno - At this time I don't really care about micro coils but who knows. I also have heard a lot of great things on the Russian and the Russian 91%. A couple of things to be careful of, like filling but leaving some air in the tank and making sure things are tight. But certainly love the way the 91% appears to be done cloning the lite and yet giving it airflow control. I really like the way the XPV units look. Squared and different but have heard very good things on the build.

I'm probably stickin' with Ekowool and std coil wraps at first, have had great luck with my current set-ups

Am lookin' forward to trying some hemp in my RDAs though....

 

[spartanstew]

It appears once you select the material type the next page has a drop down for style, I get it, was a little lost at first

OK, got it. I do think the process should be made more clear.

Maybe at the bottom of the styles (or the top, I guess), in bigger, bolder font something like STEP #1: Pick your Material.

I actually looked at that page for 5 minutes and could not figure out how to order one, because my eyes automatically gravitate to the first paragraph of text (that's bigger font) and skipped right over the choose a sub category area.

 

[SlaughterhouseV]

Brett - I would do a second drop down. So first selects mini, hourglass, ming and second selects appropriate fat/skinny and a comment box that allows input for further description details (like if a different base size is requested, tall/short/etc). Just my $0.02.

 

[SlaughterhouseV]

I'm probably stickin' with Ekowool and std coil wraps at first, have had great luck with my current set-ups

Am lookin' forward to trying some hemp in my RDAs though....

Uno - Definitely let me know how the hemp does when you do. I have been considering this as well. I know cotton has become the thing many are switching to and it works great but I have concerns of burning personally and just can't bring myself to do it.

 

[Uno mas]

if there is any other small glitches please let me know..I have been working on this for a little too long it seems

How are you going to handle the Acrylics Brett? Or did I miss that section?

 

[drewbalicious]

I think from a business stand point, the made to order selection is fantastic endeavor! I still prefer the custom jobs though.

 

[Stonefather]

I really like that slaught because....I made that guide page because I am scared that I am gonna get something like this lol

I wanna ming that kinda round but not really but not too fat but big..Also I don't like my tips too tall but I want it long and wide


or something close to that

 

[SlaughterhouseV]

Hey there drewbie-doo. Hope all is well there. I didn't see anything saying he was going to stop doing those though so there may still be some of those.

 

[Stonefather]

not doing it for acrylics...you guys have no idea how much harder polishing acrylic is....the less, the better imo

can someone see if my big bold letters make that sub category thing better..I think I can make the selections bigger later

 

[SlaughterhouseV]

I really like that slaught because....I made that guide page because I am scared that I am gonna get something like this lol

I wanna ming that kinda round but not really but not too fat but big..Also I don't like my tips too tall but I want it long and wide


or something close to that

Haha I bet Brett. I might even suggest a drop down with numbers in it for mm base and default it to 16mm. As always keep up the good work and the bully family will only grow and expand as a result of this endeavor.

 

[drewbalicious]

Hiya Slaught! All is fantastic here. I hate having a real job, but something has to pay the bills right? Yeah it says on the site Stonefather will still be doing custom sales every now and then. Although, being able to hop over to the site and order a prehistoric amber ming is very tempting indeed.

 

[SlaughterhouseV]

Brett - Not for nothing but personally I'd suggest either putting the materials selection off to the side panel or below in order to make sure people actually read it before making the selections. Just my thoughts on it in order to reduce headaches.