Nicoticket Family Virtual Vapemeet and eLiquid Support Group v.2.0

[TXRoper]

Save money with vaping.....AAAAAAHAHAHAHAHAAA!

I've heard rumors that it's possible, but I'm not even anywhere near the "break even" point yet. I may eventually reach it, as I'm finally completely satisfied with the mods and juice devices I have now...pretty much all I'm buying now is juice. If I can stick with that, I *may* break even sometime in the middle of next year.

Yeah, I'll break even in 2037 and that's if I'm dead in 2033!

 

[CheriePie]

I hear ya loud and clear on the saving money with vaping thing. Seeing as how I only smoked no more than 5 a day, and I used to get my cartons for $35, I've got a looooooong way to go before I start saving money vaping over smoking!!

 

[fancypants]

Dantes, buzz doesn't roll his own coils yet and he's moving from an eGo battery. I suggested previously (this post) that he really should get used to these things with a regulated mod first, learn to roll coils, learn more about the toppers, before moving to mechanical. But I'm sure he's been seeing y'all here discussing your mechs all the time and thus is having mech envy. Please give him your honest input, but read my post to him first.

I did that, I bought a MVP and a V3 and am glad I did that! I'm getting there! As nice as ProVaris and stuff are, probably, not sure, I wasn't ready to dive into that pool yet and not for that much dough...So that's what I got and I am enjoying the heck out of them! Now I want my SVD! Not even close to getting ready for mechanical but I am very intrigued by the coils, etc.

But can't play yet! By the time I can, I bet I am well educated! But I'm like wbbrn, with nerve damage in my hands, it's going to be tough going...I'll probably need all the help I can get, lol.

 

[buzzkill657]

What else do you use? As long as you understand the overall principle you're good. Understand that a fresh battery is gonna hit at about 4.1v then slowly die throughout the day. So a 1.2 to 1.4 ohm coil is great for me. Hits a bit hard in the morning then mellows out for the rest of the day. That is if you don't use a kick. They don't get much more simple.

Just ego twist with protank 2. And some evods.

I want something bigger for at home or when I go out. I like the k101 as far as looks and reviews seem good. Then people say I should get a vv vw to start. Sigelei Zmax v3.

Sent from my galaxy Note 2

 

[DantesInferno]

Dantes, buzz doesn't roll his own coils yet and he's moving from an eGo battery. I suggested previously (this post) that he really should get used to these things with a regulated mod first, learn to roll coils, learn more about the toppers, before moving to mechanical. But I'm sure he's been seeing y'all here discussing your mechs all the time and thus is having mech envy. Please give him your honest input, but read my post to him first.

Oh ya I see. Ya buzz go for a vamo, itaste svd, or zmax first to get your feet wet. Once you get how the ohms vs volts pans out and familiar with making coils jump on the mech bandwagon. You'll enjoy a mech mod much better once you are familiar with all that other jazz.

 

[CheriePie]

I did that, I bought a MVP and a V3 and am glad I did that! I'm getting there! As nice as ProVaris and stuff are, probably, not sure, I wasn't ready to dive into that pool yet and not for that much dough...So that's what I got and I am enjoying the heck out of them! Now I want my SVD! Not even close to getting ready for mechanical but I am very intrigued by the coils, etc.

But can't play yet! By the time I can, I bet I am well educated! But I'm like wbbrn, with nerve damage in my hands, it's going to be tough going...I'll probably need all the help I can get, lol.

well this family is awesome for that. Still miss Dishy something fierce as he was always helping out and answering questions too but now that he's gone hollywood on us...

The good thing is you're progressing naturally and not trying to skip over steps. Getting into a mech without even knowing how to build coils is just silly!

Buzz, I apologize if I've got your skill level wrong. I believe we asked about this early on, but any recommendations given to you by anyone are really gonna be based upon where you're at now.

But of course, he probably won't see this... and Dantes has taken off again when I was hoping he'd validate my concerns to Buzz about the next best step for him to take, but oh well... can't say I'm not trying to keep him from blowing his face off, right?


ETA - whoops nvm Dantes and Buzz are back now and posted just as I was saying this. LOL

 

[fancypants]

Who knew, vaping was sooo much better than cigs that I'd go absolutely ape$**t over it! It's my new hobby! That and once I move, going to start making charms, they are way easier than earrings I used to make! That's going to be fun! I have a football charm ready for me to get an o-ring and decorate.



Have more in my beading and craft stuff, I just need access to it...I know I have several fleur de lis charms in there, I have a couple I have been eyeing and I think I'll throw one on that football one too...Then some plainer ones, or plainer ones for me!

 

[keithu2]

Yeah, I'll break even in 2037 and that's if I'm dead in 2033!

With all the birthday's you have your "break even" point should be early November or so. . .

 

[fancypants]

A very merry UNbirthday to you TX!

 

[Patkid]

Alright here's a few hair pics I snapped with the webcam on my lappy. The sun is starting to set at the time I took these and the blinds are pulled (otherwise it gets super hot in here). The purple will brighten significantly after a couple washes, so it's a bit darker now than it will look by next week. The pink is looking pretty bright already though so I hope that doesn't get much brighter or I might need shades.

*alright I can't pick out the best ones so you get 4, but cuz of that, I'm putting only the thumbs and you have to click em for the full sized version.

Cherie,
You are so pretty. I love the way your hair turned out!! Your colorist must be quite the artist!
Hugs.

 

[TXRoper]

With all the birthday's you have your "break even" point should be early November or so. . .

 

[DantesInferno]

Just ego twist with protank 2. And some evods.

I want something bigger for at home or when I go out. I like the k101 as far as looks and reviews seem good. Then people say I should get a vv vw to start. Sigelei Zmax v3.

Sent from my galaxy Note 2

If you're seriously wanting one go for it. On a protank right now you're running at 3.7v. A mod is going to burn hotter. At that 4.1v or so. So you may want a head that's higher ohms than what you are using on the ego. It's certainly a doable option but ya I think I'd go for a vv/vw mod first so you get a better understanding on how it all works. You'll end up with all of them eventually anyway. Lol.

 

[TXRoper]

A very merry UNbirthday to you TX!

Just for the record this was all Clark's doing today!

 

[Patkid]

With all the birthday's you have your "break even" point should be early November or so. . .

You totally quacked me up, ducky!!

 

[CheriePie]

Cherie,
You are so pretty. I love the way your hair turned out!! Your colorist must be quite the artist!
Hugs.

Awww y'all are too nice! I don't have makeup on or anything so I was a bit overly critical taking pics. I guess I'm just so used to getting my pic taken when I'm dancing that when I'm Miss Plain Jane, I'm like ack! Plus looking straight on at the camera didn't really show much color unless I turned my head to one side or the other. I turned the backlight up on the cam to make up for the sun going down which helped too though.

PS - I'll pass along your compliments to Sarah, my stylist, as well.

 

[buzzkill657]

Oh ya I see. Ya buzz go for a vamo, itaste svd, or zmax first to get your feet wet. Once you get how the ohms vs volts pans out and familiar with making coils jump on the mech bandwagon. You'll enjoy a mech mod much better once you are familiar with all that other jazz.

Thanks for the insight. I like the Zmax a lot from reviews. The is a Vape meet on Saturday I'm gonna go and how you talk to people about their mods

Sent from my galaxy Note 2

 

[Patkid]

My FT order w/ the evods etc is still saying "HK acceptance 9-6" sigh
however
My order for the iTazte 3.0 and one evod and one mini protank is due to arrive tomorrow from VapingMe.
I am very excited.

 

[CheriePie]

Just for the record this was all Clark's doing today!

Yup I remember... he popped in to cause a bit of trouble, dropped that egg, then ran off!!

 

[DantesInferno]

I did that, I bought a MVP and a V3 and am glad I did that! I'm getting there! As nice as ProVaris and stuff are, probably, not sure, I wasn't ready to dive into that pool yet and not for that much dough...So that's what I got and I am enjoying the heck out of them! Now I want my SVD! Not even close to getting ready for mechanical but I am very intrigued by the coils, etc.

But can't play yet! By the time I can, I bet I am well educated! But I'm like wbbrn, with nerve damage in my hands, it's going to be tough going...I'll probably need all the help I can get, lol.

Yep take your time. For the record I used nothing but vv/vw mods (provari and zmax) for over a year before getting my first mech mod. They are certainly not a necessity.
Now coil building. Thats nearly becoming a necessity. Lol. . I got into those early. As soon as the first rba's came out.

 

[Patkid]

Want to post 'hello' to Dishy, Hawky, Gotta, Nila, and others that are MIA just incase they drive by.
HELLO!!