With the popularity of this company from this forum I have ordered just about every juice they have in stock. They have some great flavors and even better service. I seem to prefer Wakonda over just about all the other e liquids they sell. I've vaped quite a bit of it in my nautilus mini and noticed very quickly I'll start to get a semi-burned flavor from it (after about 4 ml). The strange thing is it seems to happen regardless of voltage. It seems like it may be gunking up my coils and the burned flavor is just juice residue. I don't get this sensation with any other juices except for the virus flavor occasionally. Is this juice prone to build up on coils or is it just me?
Nicoticket question
- Thread starter Dhans86
- Start date
- th_trl_thread_readers 0
- Status
It's a coil gunker for sure mah friend...between all the sweet, tobacco and custard components it will fill the coils up with crud! It's easier to deal with if you rebuild your coils though...
Yep, this, Frenilla and Got Cookie are very gunky. I use them in rebuildables so I can clean my coil and rewick as needed.
I have the same problem, out of the 5 Nicoticket flavors that i tried, 5 of them gunk up my coils like crazy. I still vape Wakonda and CLS because they are really good but not too often. If they werent as gunky I would vape them everyday.
Maybe its the type of sweetener they use?
Maybe its the type of sweetener they use?
Last edited:
My taste buds tell me they use a larger percentage of flavoring compared to most vendors, so one option might be to dilute the juice with some flavorless liquid. I know this won't be a popular thing to say, but i actually enjoyed Wakonda more, when i diluted it. It might also be an option for those who think Nicoticket juices are a little too rich and sweet for their preference, regardless of the gunk factor which is not an issue for me as i am used to vaping NETs.
Well, I hate to hear this. Would a Igo L and some premade coils be a reasonable and cheap solution for the time being? That way I can make NT my at home sauce and use my tanks and other liquids when I'm on the go. I do 90% of my vaping at home anyway.
A bottom feeder with a couple of different toppers circumvents the need for tanks. There are a whole slew of them now and quite a few regulated ones so you no longer have to go mechanical.
Sent from Stoooopidtalk!
Hey Soignee,
Hope all's well with you buddy ! Do you have a link to a reasonably priced regulated bottom-feeder. The only ones i found are some incredibly expensive Italian ones ( they are absolutely beautiful though ).
What's up Mazinny? Hope all is well with you too!
I don't think any of them are inexpensive. I'm headed into the drudge but I'll dig some links up when I get home later...build your own seems the least expensive right now.
Sent from Stoooopidtalk!
Thanks for the advice, bro. I'm a noob to all this and all my devices and tanks are still shiny and new, so a dripper looks to be the best option for me right now.
Looks like I can get a Igo L and 50 premade wicks for about $17 shipped on Ebays.
Last edited:
Do all threads need to be moved to the suppliers pages, if the vendor is a registered supplier ? There are a lot of us who don't frequent the supplier pages too often. Not questioning the move mind you, just curious what the policy is. I have seen plenty of threads in General e Liquid section on vendors who have their own page in the suppliers section.
I always use Got Cookie in an original Kanger Evod with the single coil - still tastes good!
I need to mix the PG/VG ones with a max VG such as a crème brule or custard, but I still get the coils gunking up after a few days. I often get the authentic Kanger ones from FT ...the same goes for the T3S tanks (they use the same coils).
I use Virus mixed in the same way, but in an eMOW tank, and the coils for that don't do too badly.
Wakonda, I use in the same way too in either type, but the coils for the eMOW etc (V2 upgraded double coils) don't do so well with gunky liquids, so the Evod works best.
The Nautilus coils used to be fairly good with chocolate ...around 5 days - I only used mine with the chocolate or a lemon cream one - but the coils have been very erratic in quality in recent purchases, so I stopped using them for now.
I haven't tried these in the Eleaf AIR yet though ...must try it.
I just don't care for the idea of rebuilding ..not got that sort of patience
Do all threads need to be moved to the suppliers pages, if the vendor is a registered supplier ? There are a lot of us who don't frequent the supplier pages too often. Not questioning the move mind you, just curious what the policy is. I have seen plenty of threads in General e Liquid section on vendors who have their own page in the suppliers section.
Generally we leave them be, but if the supplier wishes to address the issue, we'll often move the thread to an area they're authorized to respond. Suppliers are not permitted to discuss any aspect of their business outside of the supplier forums.
Me neither. But I got 50 premade RDA coils for $7 (shipped) on eBay today. 1.8 ohms. All I gotta do is attach them to the posts on the RDA, and I'm good to go (I hope). My plan is to use that at the house when I'm vaping the sticky stuff.I just don't care for the idea of rebuilding ..not got that sort of patience
I'll let you know how it works out if you want.
Yes, please do! I may need to think about these things at some point!
....I get mad threading a needle to sew a button on! 
So, here are two links to subs here on ECF that deal with Printed BF's with DNA 30's and 40's...no doubt the least expensive option around. The third link is a Google search I did for printed bottom feeder mods and it yields some sight that you can aquire some of these...
It's gonna be 6 months or so until I can get find the time and effort to deal with considering building one. I would love to just build one of mah funky flavor chasing coils and let a board deal with wattage for me...I'm a huge fan of regulated devices, but I've also become lazy and love the ease of bottom feeding!
http://www.e-cigarette-forum.com/forum/modding-forum/560010-printed-dna30-bottom-feeder.html
http://www.e-cigarette-forum.com/forum/modding-forum/659033-printed-dna-40-bottom-feeder-mod.html
https://www.google.com/search?q=pri...57.20468j0j8&sourceid=chrome&es_sm=0&ie=UTF-8
I'm an odd ball out here, I find Wakonda pretty benign to my coils...I usually don't rewick until after 10-12ml. I rewicked after 6-8ml of it when I vaped it around 1 ohm though.
Atlanta on the other hand, which I'm vaping right now...6ml tops
Atlanta on the other hand, which I'm vaping right now...6ml tops
I'm an odd ball out here, I find Wakonda pretty benign to my coils...I usually don't rewick until after 10-12ml. I rewicked after 6-8ml of it when I vaped it around 1 ohm though.
Atlanta on the other hand, which I'm vaping right now...6ml tops
With all due respect mah holy brotha, Dhans86 (OP)is vaping off Nautilis coils...
I'm in the same boat as you HB and can dry burn at will...
When I was working with say a Kayfun, I was having to dry burn and rewick after maybe 3 mls...
- Status
