No More Cartos For Me -- I've Found the Grail (For Me at Least)

Status
Not open for further replies.

Rhapsodies Fire

ECF Guru
ECF Veteran
Oct 18, 2010
26,180
41,035
Bow, WA, USA
www.reosmods.com
Well...its all flushed out with alcohol per the instructions on the site...gave it a quick tiny rinse...blew it out battery side out...then stuck it on my mod. At first...it fired....but no vapor, no flavor. Removed it...blew it out backwards again into a towel, and stuck it back on the mod. First few vapes were sketchy....dry no flavor...but this time vapor. Babied it through some gentle kisses (blind squonking) and now its back to where it was before I cooked the hell out of it. Dood....this is amazing! :w00t: None of my other atties could do that. Ever. :wub:
 

SammyT

Unregistered Supplier
ECF Veteran
Mar 14, 2011
1,684
1,654
40
Auburn, Alabama, USA
www.freighttrainmods.com
Well...its all flushed out with alcohol per the instructions on the site...gave it a quick tiny rinse...blew it out battery side out...then stuck it on my mod. At first...it fired....but no vapor, no flavor. Removed it...blew it out backwards again into a towel, and stuck it back on the mod. First few vapes were sketchy....dry no flavor...but this time vapor. Babied it through some gentle kisses (blind squonking) and now its back to where it was before I cooked the hell out of it. Dood....this is amazing! :w00t: None of my other atties could do that. Ever. :wub:

Now that... Is just plain awesome! Congrats on salvaging it, and congrats hanna for making one heck of an atty :D
These things are like the reo grand of atomizers, put em through hades, and they keep kicking out the vapor
 
Last edited:

mwa102464

Resting In Peace
ECF Veteran
Oct 14, 2009
14,447
12,564
Outside of the Philadelphia Burbs, NJ & Fla
Well...its all flushed out with alcohol per the instructions on the site...gave it a quick tiny rinse...blew it out battery side out...then stuck it on my mod. At first...it fired....but no vapor, no flavor. Removed it...blew it out backwards again into a towel, and stuck it back on the mod. First few vapes were sketchy....dry no flavor...but this time vapor. Babied it through some gentle kisses (blind squonking) and now its back to where it was before I cooked the hell out of it. Dood....this is amazing! :w00t: None of my other atties could do that. Ever. :wub:


Yaaaa baby aint that a great feeling, I wouuld have loved to see the expression on your face when that Atty kicked in, these are just some bad ... Atty's,,, though there more then I think they should be I still buy em and use em because of how super these are,,,, keep it away from Hubby so he dont get it ;-)
 

Rhapsodies Fire

ECF Guru
ECF Veteran
Oct 18, 2010
26,180
41,035
Bow, WA, USA
www.reosmods.com
Yaaaa baby aint that a great feeling, I wouuld have loved to see the expression on your face when that Atty kicked in, these are just some bad ... Atty's,,, though there more then I think they should be I still buy em and use em because of how super these are,,,, keep it away from Hubby so he dont get it ;-)
:laugh: No worries there...I know to vape juice he doesn't like and he keeps his mitts off my mods :lol: I learned that early on with the Woodvil mini prototype :glare:

Ya...it was amazing...but I kept my cool for the first couple hours...was afraid my hopes were too high. I'm in love with this!!!
 

bladebarrier

Super Member
ECF Veteran
Verified Member
Sep 21, 2010
696
203
CT
I noticed yesterday, that after about 30 ml of juice, it was leaking just a touch. Dropped it in pure grain for about 2 hours, shook it while in its bath for about 30 seconds (at the end), let it dry and re-primed it. Back to new.

I really want to grab some more so I have lots of backups, but they limit you to two of the long barrels per order, and they're out of stock again. :ohmy:

Hanna's fingers are probably rubbed raw trying to get these out, especially if they were passed around during the vape fest.
 

AmnNate

Super Member
ECF Veteran
Verified Member
Sep 2, 2010
495
714
Charleston, SC
Well...its all flushed out with alcohol per the instructions on the site...gave it a quick tiny rinse...blew it out battery side out...then stuck it on my mod. At first...it fired....but no vapor, no flavor. Removed it...blew it out backwards again into a towel, and stuck it back on the mod. First few vapes were sketchy....dry no flavor...but this time vapor. Babied it through some gentle kisses (blind squonking) and now its back to where it was before I cooked the hell out of it. Dood....this is amazing! :w00t: None of my other atties could do that. Ever. :wub:

Glad to hear it. I haven't cleaned mine out since I got it, oops. I feel like I should, but it just seems like it doesn't need it. It performs like new still. what kind of mix are you all using in yours? I've been running about a 50/50 pg/vg, but just curious if it hits just as hard with just one or the other.
 

Rhapsodies Fire

ECF Guru
ECF Veteran
Oct 18, 2010
26,180
41,035
Bow, WA, USA
www.reosmods.com
Glad to hear it. I haven't cleaned mine out since I got it, oops. I feel like I should, but it just seems like it doesn't need it. It performs like new still. what kind of mix are you all using in yours? I've been running about a 50/50 pg/vg, but just curious if it hits just as hard with just one or the other.
I'm running 100%VG Vanillaz & Havana Gold in mine...very thick juice. :)
 

bladebarrier

Super Member
ECF Veteran
Verified Member
Sep 21, 2010
696
203
CT
OK, I have a 1.5 ohm Cisco 306 set up with a fresh battery and a pyrex dt on one Mini Woodvil, and a 1.5 ohm HH357 also with a fresh battery and a 510 pyrex dt on another Mini Woodvil. Both with my familiar all day vape 80PG/20VG 24mg VaporBomb Fire n Ice.

I am going to risk nic OD and compare. :)

Careful. They're both power houses at 24mg, I'm sure.
 

redgirl

Vaping Master
ECF Veteran
Verified Member
Nov 21, 2009
3,273
321
Brunswick, MD
I got gifted a 1.5 ohm 357 at a recent vape meet and I still like regular 1.5 ohm attys better. I haven't tried to clean it yet, but I followed the initial instructions. Just doesn't give me as much TH and there is a slight burnt flavor. Maybe I'm doing something wrong, but I'm going to clean it and try again. Anyone else find it doesn't give as much TH?
 

mlinky

ECF Guru
ECF Veteran
Verified Member
Nov 22, 2010
12,203
7,031
Kentucky
So far:

They are both excellent attys. I knew that I loved the Cisco 306's, so that is no surprise. The HH357 is also fabulous, but a bit different.

The HH357 produces slightly more vapor.
The flavor is "truer" on the HH357.
The HH357 has a more airy draw.
The HH357 is somewhat cooler (I have the shorty HH357).

I like the vapor and flavor on the HH357 better than the 306.
I like the draw and heat on the 306 better than the HH357.

Interestingly, I found myself reaching for the HH357 more. I went through 1 ml more juice on it in the same amount of time. This might be because of novelty.

I'll post again after another week or so.
 

MacDiver

Super Member
ECF Veteran
Verified Member
Feb 7, 2010
756
126
Morehead City, NC
Thanks for the heads-up on this blade!

I'm late to the party but managed to get in today. At first there were none on the site but I messaged them and Jessica messaged back that she had just put some up. I got the max 2ea and only stainless were available in the long 510 version.

I found this just in time!

I've been looking for a alternate atty or carto and am down to my last two CE2 cartos and one Vapor King LR 1.5 510. I had been debating what to order next but couldn't decide. There weren't any options except for the same ole. The cartos get crusty on the element within a few hours and the vape and flavor almost stop in a couple days. The attys clog up and get hard to pull and just lose their flavor in a few days too. I've been drilling the holes out and all that too. Hopefully, with the ease of cleaning these will last much better and with better flavor.

From what mlinky said too about the 306...I had tried and liked the heat of a 306 but they would pop hot juice so I stopped using them. Hopefully, with the long barrel - I'm thinking it's about the length of a carto - that won't be a problem.

:)
 
Last edited:

bladebarrier

Super Member
ECF Veteran
Verified Member
Sep 21, 2010
696
203
CT
From what mlinky said too about the 306...I had tried and liked the heat of a 306 but they would pop hot juice so I stopped using them. Hopefully, with the long barrel - I'm thinking it's about the length of a carto - that won't be a problem. :)

The long barrel seems to work well. I don't really have any issues with juice popping, like on a 306 LR. I used to use the long canon tips on those, and they still popped a fair bit. Dunno what's different with these, but they certainly are not short, especially after you put a good tapered tip on them. I've gotten a mouthful before, when I wasn't paying attention, but it was user error with my squonking; not really from the juice splattering.

I ordered two more when I saw your post about them being available again. Aside from 801's, which are a pain to feed, I can't think of any other atty that I would want to use again. I'm almost completely quit from nicotine again, so I'm hoping between the three of these atty's, that'll be it. Then again, I've been wrong before :facepalm:
 
Status
Not open for further replies.

Users who are viewing this thread