The costs of running this huge site are paid for by ads. Please consider registering and becoming a Supporting Member for an ad-free experience. Thanks, ECF team.

NZ - NEW- Mouthpiece Covers - iClear 16D - Resistance Meter V2 + more

Discussion in 'Australia/New Zealand Suppliers' started by SDMagoo, Feb 27, 2014.

Thread Status:
Not open for further replies.
Image has been removed.
URL has been removed.
Email address has been removed.
Media has been removed.
  1. SDMagoo

    SDMagoo Registered Supplier ECF Veteran

    May 6, 2011
    New Zealand
    Hi everyone,

    Keeping with this years theme of bottom dual coil head types, this week see's the release of iClear 16D clearomizers.

    Please note this is a completely new style of clearomizer and is not cross compatible with the original iClear 16 clearomizer - see below for more info.

    iClear 16 - the original and as supplied in some of our starter kits
    iClear 16D - is new and also requires a new head type - iClear 16B just to add confusion....

    Cleaning and maintenance of your batteries and chargers - Please clean your battery and charger contacts before each charge - a quick wipe out with a tissue is all that is required usually, we have noticed on some warranty returns that the battery connections are often in a shocking (no pun intended) state and quite possibly contributed or caused failures from this lack of general maintenance and care - this could end up with a failure being declined for warranty.

    Stock notes

    iClear 16 dual coil heads - see below for new options - all now back in stock.

    Archive of previous weekly newsletters - Click here

    Cheers and vape on!


    iClear 16D - BCDC Clearomizer - Bottom changeable dual coil

    Introducing the iClear 16D by Innokin

    New to Naked Vapour Feb 2014, Innokin have redesigned the iClear 16 (as in some of our starter kits) to now offer a bottom mounted dual coil type.

    With the head mounted at the base, e-Liquid is typically covering the wick entry points to aid good coil/wick resaturation, therefore reducing the risk of dry burning.

    What else is different?

    • Integrated tip & fewer parts overall, the main tank section is now a one piece design - reducing moving parts, o-rings that do wear overtime.
    • Slightly larger e-Liquid capacity at approx 2.0ml
    • Head can be changed without requiring an empty tank!
    • BCDC - Bottom changeable dual coil
    • NB: eGo only type connection - suitable for direct use with eGo-C, EVOD, Biansi batteries - 510 only type connection devices will need a 510-eGo adapter

    iClear 16D - Bottom Dual Coil Clearomizer

    NEW - Intro Pricing while stocks last!
    BCDC Clearomizer






    iClear 16B Bottom Dual Coil Heads - 5 PACK

    Replacement dual coil heads for the Innokin iClear 16D and 16B only

    5 PACK

    • 1.5ohm suitable for 3.3 volt type outputs - Old eGo-T type batteries
    • 1.8ohm is suitable for 3.7 volts type outputs to around 4.2volt - eGo-C, EVOD type batteries
    • 2.1ohm is suitable for 3.7volt and over - eGo-C, EVOD, Biansi type batteries

    iClear 16B Replacement Heads
    - 5 Pack

    For iClear 16D or 16B



    Short Silicone Mouthpiece - 6 pack

    These fit over most standard 510 tips or mouthpieces that have a diameter of 9mm or greater.

    They provide a softer mouthfeel and may help reduce e-Liquid condensate escapes with the centered airway hole.

    • Compatible with Ovape, Ce4, Ce5, V2, V3, V3+, iClear 16, iClear 16D, EVOD etc and many more

    - Also handy for identifying similar clearomizers - colour coding etc

    • Disposable - these are a use once or twice type item.
    • Choose any 3 colours from the drop down menu upper right - 2 of each colour are supplied



    Needle Capped Bottles

    One of the best accessories for refilling e-Liquids.
    These needle capped bottles help make refilling simple and easy, the needled cap helps get the e-Liquid to where it is supposed to go.

    The bottles are soft and semi-transparent and easy to squeeze.

    TIP: Our standard dripper bottles are also compatible with these bottle lids, just remove the dripper cap first.
    Each set contains

    • 1 x PE Bottle; choose from 10 or 30ml size options
    • 1 x Needled screw top lid
    • 1 x Needle Cap lanyard/cover

    Needle Capped Bottles

    10 or 30ml

    8 colours to choose from


    See our e-Liquid mixing kit listing for more info on how to begin making your own e-Liquids!!

    e-Liquid Mixing Kit

    Whats in the kit?


    Atomizer Resistance Meter V2
    Easily test cartomizers, clearomizers and atomizers and now batteries with the includedadapter - all without having to use a multi-meter!

    Suitable for measuring e-cigarette atomizer circuits with connections types: 510 or eGo

    • NB: requires 2 AA batteries - not supplied



    iClear Dual Coil Head - Replacement 5 PACK

    Replacement dual coil heads for the Innokin iClear 16 and iClear 30 Dual Coil Clearomizers only
    5 PACK

    1.5ohm - IN STOCK - heads are typically suitable for eGo type output devices, 3.3-4.0v
    2.0ohm - IN STOCK - heads are better suited at voltages over 3.7volt - EVOD - eGo-C & Biansi batteries - as supplied in the clearomizers in the Naked iClear 16 kits and Explorer kit

    We have new generic iClear 16 heads - available from the drop down menu (unbranded heads - suspected to be Innokin, same head, same packaging, same outer box type) - same cost also hence no difference in price.

    1.5ohm - Generic type - in stock
    2.2ohm - Generic type - in stock

    iClear 16 - Dual Coil Head - 5 PACK
    5 Pack

    Replacement Heads


    Archive of previous weekly newsletters - Click here

    Until next week, cheers from Rob, Lia and team at Naked Vapour.


    Naked Vapour is New Zealand's e-Cigarette specialist.

    Copyright © 2014 Naked Vapour Ltd, All rights reserved.
Thread Status:
Not open for further replies.

Share This Page