Official ProVari 3 Thread - P3 *PART 2*

[The Ocelot]

Soooo, I was just looking at the ProVape site and a funny thought occurred. Could the P3 be on it's way out? Now don't just say I am crazy, but the order of listing of the mods just struck me as peculiar:

Procyon
Radius
Classic ProVari
ProVari P3
ProVari 2.5

Why would the P3 be listed below the Classic and above the 2.5 which we already have been told is going the way of the T Rex. ? Just some idle musing is all, carry on...

I doubt it, not with the size options. Could the order be when they were released? Was the Classic released after the P3?

 

[coldgin96]

You have two other ones, so a stare and compare will put you at ease pretty quickly as no clones are perfect.

Deals can be had IME..... I bought a Classic for $100 and a P3 for $75 in the last few months. Now they were used (but mint) and I am 100% confident they are authentic.

Now that I think about it, I have never even seen a picture of a fake Provari, let alone seen one in the flesh!

Personally, I think they are just clearing out their inventory. If you notice they don't have any other ProVape products on their site. It might be that they aren't going to sell ProVape anymore.

I'll be able to tell... And I talked to the guy on the phone, so we'll see.

 

[GeekyGeezer]

Enter code ECF and it knocks about five bucks off the price
I put one in my cart like three times, then finally decided no...I'm holding out for something special

I'm in exactly the same place. I've never had it in my cart but I've loaded that page five or six times. The only thing that stopped me from buying was wanting to wait to see what the ZNA Pro is all about.

I have two ZNAs and a chip upgrade would make the model crazy good.

But if those P3 GMZs on the specials page take a dive like the 2.5s did, disregard anything I've written.

 

[ScandaLeX]

Well gee, thanks for scaring the Hell out of me! Before pulling the trigger on the purchase I looked them up on your website and they are listed in your Dealer Locator. In fact, they are listed as a Authorized Upgrade Center. I never would have went for it otherwise.

Vape360, I love you and ProVape but as far as EVERYONE ELSE...
Thank you for making me feel better! Jackie and I love all of you too!

I hope it's legit, and weather it is or not, I'll never buy outside of ProVape again! My heart can't take it! LOL

You don't have anything to fear buying outside of ProVape. No one is selling the clone.
Seriously tho, many of us cleaned up during Night of the Vixen. Prices were ridiculously cheap & no one was afraid of getting got for their money.

 

[ScandaLeX]

Considering it was out when the Vamo was all the rage, ProVape may have made the only purchase.

Now THIS was a knee slapper!!!!!!

 

[coldgin96]

You don't have anything to fear buying outside of ProVape. No one is selling the clone.
Seriously tho, many of us cleaned up during Night of the Vixen. Prices were ridiculously cheap & no one was afraid of getting got for their money.

 

[JUMA55]

Agree the GMZ can feel sticky and I don't get that with the Ti.

My GMZ should be at my door today in the UK so I will be interested to see how I feel about the differance. Still love the GMZ more that the Ti, but as we know love can be fickle.

Talking about fickle, the weather today in London is playing a good game. Cold, sunny, warm, rain, hailstones... sun! Not bad in an hour if you want to experience differant conditions. Cheers

Sounds like Central Texas this time of year. One never knows in morning how it's going to play out during the day.

 

[JUMA55]

I've had GMZ's and Gold Zenkote's feel like that, Dampen a paper towel with some isopro and give it a good wipe down. Then polish it with a soft cloth.

My Zenkote ProVis get a damp paper towel wipe down from time to time during the day.

I run my P3s and Minis is 18350 mode with Kabukis, so it works out that it's about time to fill the tank when the battery needs recharging. I always wipe out the well with a tissue, then the bottom of the Kabuki. After that I run a Dukal "cotton tipped applicator," aka Q-Tip without the shedding, inside the base and around the threads of the Kabuki. When I'm finished with the battery swap and Kabuki fill, I wipe both down with regular Windex wipes, which I then turn around and wipe off with a microfiber towel. Finally I run a fluffy pipe cleaner down the drip tip and just lightly touch the top of the screen. Depending on the juice, it might come back nasty or look like it's picked up nothing. I know, I'm .... about this. It was the same way when I smoked a pipe. A lot of those were Dunhill versions of ProVaris, meaning expensive, so I took good care of them.

It might just be that my Windex rubdown has produced a similar result over time to your use of isopropal, because my oldest gold Zenkote does not have the same tacky feel of my GMZ, which is only a couple of weeks old.

It's been awhile, so now it's probably time to follow Rod's advice and do the threads. Never-ending, just like a pipe.

 

[{Sean}]

Sounds like Central Texas this time of year. One never knows in morning how it's going to play out during the day.

Oh, that's good as I have always wanted to visit Texas, Montana, Nebraska etc (guess I spent too much time as a youth watching cowboy films) so I will be in tune with the weather..

I had a happy three weeks in NY years ago but apart from changing flights in the U.S. to and from Central America, that's it.

Yesterday in London was warm, T-shirt weather, today chilly with a nip in the air, in a day or so it is supposed to be getting hot.

I guess the weather is a bit off topic but it is nice to know what's happening with you good people in your neck of the woods.

All the best. Sean

 

[The Ocelot]

Oh, that's good as I have always wanted to visit Texas, Montana, Nebraska etc (guess I spent too much time as a youth watching cowboy films) so I will be in tune with the weather..

I had a happy three weeks in NY years ago but apart from changing flights in the U.S. to and from Central America, that's it.

Yesterday in London was warm, T-shirt weather, today chilly with a nip in the air, in a day or so it is supposed to be getting hot.

I guess the weather is a bit off topic but it is nice to know what's happening with you good people in your neck of the woods.

All the best. Sean

If you're looking for the old west, skip Nebraska. You want to visit Northern Nevada.

 

[AstroTurf]

If you're looking for the old west, skip Nebraska. You want to visit Northern Nevada.

I wanna visit... The Junction!!!

 

[rbrylawski]

I reckoned, visiting these country folk would have been a hoot!



But if there was one star from my childhood, I could have visited it would have been this fellow from the Wild Wild West! I don't care who knows I had such a crush on him as a kid!

 

[The Ocelot]

 

[coldgin96]

It's real alright...

Talked to dude again today that sent it. He said sales went up 200%, they upped their price to $129.99 and all they have left is the polished silver.

I got what I wanted for only $99.99 and yes, I'm giving credit to The Lord and that person who originally posted the link.

 

[The Ocelot]

It's real alright...

Talked to dude again today that sent it. He said sales went up 200%, they upped their price to $129.99 and all they have left is the polished silver.

I got what I wanted for only $99.99 and yes, I'm giving credit to The Lord and that person who originally posted the link.

View attachment 550788

You done scored like a Vixen.

 

[coldgin96]

You done scored like a Vixen.

Oh yeah, and look at that pic, NO PAPER GAP! That's cause it's brand spanking new! Ver. 39 btw...

 

[Paul Allen]

It's real alright...

Talked to dude again today that sent it. He said sales went up 200%, they upped their price to $129.99 and all they have left is the polished silver.

I got what I wanted for only $99.99 and yes, I'm giving credit to The Lord and that person who originally posted the link.

View attachment 550788

What kind of tank is that coldgin96?

Sent from my SM-N910V using Tapatalk

 

[rbrylawski]

What kind of tank is that coldgin96?

Sent from my SM-N910V using Tapatalk

In case he doesn't see your question, it's a P3 threaded Kabuki, with an etched glass tank.

 

[Paul Allen]

In case he doesn't see your question, it's a P3 threaded Kabuki, with an etched glass tank.

Ty!

Sent from my SM-N910V using Tapatalk

 

[ScandaLeX]

Oh yeah, and look at that pic, NO PAPER GAP! That's cause it's brand spanking new! Ver. 39 btw...

What is a "paper gap"?