Official VAPE DOCTOR ECF Specials! Starter Kits | MODS | RBA/RDA | E-liquids | Drip Tips | & More!

Status
Not open for further replies.

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
agat2.jpg

Aga-T2

The AGA-T2 rebuildable atomizer is a genesis style atomizer for the enthusiasts that would like to get into rebuildables. Extreme vapor production can be achieved with the kanthal wire and stainless steel mesh wick. For advanced vapers only.

Comes with:

AGA-T2 Rebuildable Genesis Style Atomizer
O-rings
Stainless Steel Mesh x 2
Kanthal Wire x 2

AGA-T2 Genesis Style Rebuildable Atomizer RBA - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
agat3.jpg

The AGA-T3 is a genesis style rebuildable atomizer. It features a stainless steel housing with a pyrex glass tank. It has a tank capacity of approximately 1.5 mL. The unit is rebuildable using stainless steel mesh or ceramic wick.

Stainless Steel Housing
Pyrex Glass tank
Approx. 1.5 mL capacity
510 Threading

AGA-T3 Genesis Style Rebuildable Atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Last edited:

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Hammer Mechanical Mod 1.jpg

The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:
1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
igo-w.jpg

IGO-W Rebuildable Dripping atomizer

Rebuildable dripping atomizer is for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick and kanthal wires, and extra o-rings. These RBA are small but produces an extreme amount of vapor depending on how you rebuild them.

Stainless Steel
Rebuildable Atomizer
Comes with Kanthal, Silica Wick, and three screws

IGO-W Rebuildable Dripping atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Dec 03, 2 44 35 PM (1).jpg

Safe Li-MN 3.7V rechargeable battery

Features:

Brand Name : MNKE
Size 18650
Type : Li-MN (HIGH DRAIN)
Rated Capacity 1500 mAh
Nominal Voltage : 3.8V
Peak Voltage : 4.2V
Additional Features:
Maximum Continuous Discharging Current : 20 Amps
Maximum Pulse Discharging Current : 60 Amps
Maximum Continuous Charging Current : 6.5 Amps
Maximum Rated Discharging Current : 30 Amps

MNKE IMR 18650 3.7v Li-MN Rechargeable Lithium Battery - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Caravella Mechanical Mod Stainless Steel 1 - Copy.jpg

The Caravela replica features the signature "ship" logo on its 100% stainless body by HCigar. This mod is a true 1:1 replica of the caravela. The HCigar Caravela Replica comes with three different tubes to fit different size batteries (18350, 18500, 18650). The positive and negative contact pins on this mod are silver-plated. The bottom firing button uses a spring and the locking ring on the Caravela Replica is reverse threaded.

Features:
1:1 True Replica of Caravela
Caravela Signature Ship Logo on All Three Battery Tubes
Signature Caravela "C" Logo on Bottom Firing Button
100% stainless seamless 18350, 18500, and 18650 Main Body Tube
100% stainless Top Atomizer Cap and Locking Ring
Positive and Negative Contact Pins are Silver-Plated
Internal Button Switch and Spring
Reverse Threaded Locking Ring
Recessed 510 Atomizer Connection
Adjustable 510 Contact Pin w/ Black Delrin
22mm External Diameter
HCigar Embroidered Carrying Case (Black Case- Stainless Steel Caravela Replica)

Caravela Stainless Steel Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Last edited:

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Caravella Mechanical Mod Brass 1.jpg

The Caravela replica features the signature "ship" logo on its 100% brass body by HCigar. This mod is a true 1:1 replica of the caravela. The HCigar Caravela Replica comes with three different tubes to fit different size batteries (18350, 18500, 18650). The positive and negative contact pins on this mod are silver-plated. The bottom firing button uses a spring and the locking ring on the Caravela Replica is reverse threaded.

Features:

1:1 True Replica of Caravela
Caravela Signature Ship Logo on All Three Battery Tubes
Signature Caravela "C" Logo on Bottom Firing Button
100% brass seamless 18350, 18500, and 18650 Main Body Tube
100% brass Top Atomizer Cap and Locking Ring
Positive and Negative Contact Pins are Silver-Plated
Internal Button Switch and Spring
Reverse Threaded Locking Ring
Recessed 510 Atomizer Connection
Adjustable 510 Contact Pin w/ Black Delrin
22mm External Diameter
HCigar Embroidered Carrying Case (Blue Case- Brass Caravela Replica)

Caravela Brass Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Nov 26, 2 58 58 PM.jpg

The Anyvape Davide Glassomizer is the first of its kind to revolutionize the vape industry! This tank features a glass tube locking system as well as a replaceable bottom coil. Since the coil is located at the bottom of the unit instead of the top, the vapor is given more time to cool before you inhale it; allowing a smoother, more pleasureable experience. Also the pyrex glass construction of the tank eliminates any possibility of e-liquid deteriorating your tank.

Anyvape Davide Glassomizer BCC kit comes with:
1 x Anyvape Davide Glassomizer (Silver caps, Clear Pyrex glass tube)
2 x replacement atomizer head (1.8 ohm and 2.2 ohm)
1 x eGo Thread Adapter
Gift box with instructions on back

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Last edited:

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Mar 07, 6 52 38 PM.jpg

The Russian 91% is a RBA (rebuildable tank atomizer) made of 304 grade stainless steel with adjustable airflow and a bottom screw fill hole. Due to its design the Russian 91% atomizers produces very flavorful vapor. The Russian 91% is very similar to the Kayfun Lite & the parts can be interchanged with the Kayfun Lite. It features a 510 threading that is compatible with most devices that use the popular 510 connection. Also there is a 510 connection adaptor for driptips and a metal tank section to replace the plastic tank section on the Russian 91%. Please take note that the clear tank is susceptible to decomposition when filled with a highly acidic or corrosive eLiquid. Usually, eLiquids that are oil based (cinnamon, peppermint, clove, etc.) tend to cause problems for these products and should be avoided.



Features:

All high quality solid stainless steel 316
Underpressure DIY Atomizer
Flavorful Vapor
Air Control
Parts are Interchangable with the Kayfun Lite
510 connection to fit most devices
510 driptip adaptor
Bottom screw, fill hole
Adjustable 510 center pin
The Russian 91% includes:
The Russian 91% with airflow control
Clear Tank
Driptip Adaptor for all 510 driptips
Metal Tank Section "used to replace the clear tank section"
Package of Silica Wick
Package of Nichrome Wire
Package of replacement screw
2 x Spare part air flow screw
2 x Spare part wick holding screw
6 x Spare O-Rings
Multipupose mini screw driver
Gift box & instruction manual

Genuine Russian 91% - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
igo-w.jpg

Rebuildable dripping atomizer is for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick and kanthal wires, and extra o-rings. These RBA are small but produces an extreme amount of vapor depending on how you rebuild them.

Stainless Steel
Rebuildable Atomizer
Comes with Kanthal, Silica Wick, and three screws

IGO-W Rebuildable Dripping atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
agat2.jpg

The AGA-T2 rebuildable atomizer is a genesis style atomizer for the enthusiasts that would like to get into rebuildables. Extreme vapor production can be achieved with the kanthal wire and stainless steel mesh wick. For advanced vapers only.

Comes with:

AGA-T2 Rebuildable Genesis Style Atomizer
O-rings
Stainless Steel Mesh x 2
Kanthal Wire x 2

AGA-T2 Genesis Style Rebuildable Atomizer RBA - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
ihybrid.jpg

Genuine iHybrid Pure Mod are now available! Made in the USA, This hybrid genesis mod release features 5 special annodized colors including: Black, Blue, Red, Green, and Purple. These new ihybrid pures are much lighter and sleeker than the original, but packs all the performance of it's predecessor. The iHybrid features a 3ml PMMA tank, Brass contacts, Genesis atomizer tank system, and Architectural Grade 2 annodizing. The aluminum tube is anodized inside and out to improve insulation and increase voltage drops.

Power SOurce: AW IMR18490
3ml PMMA Tank
Brass Contacts
RBA: Mesh/Coil, Ceramic, Silica
Architectural Grade 2 anodizing
Add Genuine AW IMR18490 Protected batteries and Vape at a safe level with the amps you need. Buy in bulk and save.
Add NiteCore I2 Intelligent Charger to quickly charge your batteries simultaneously with LED battery monitor and safetly shut off after full charge is complete.

*Exclusive iHybrid Pure Pricing only, not valid with any other offers

Genuine iHybrid Pure 18490 - USA Hybrid Genesis Tank Mod Anodized - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Hammer Mechanical Mod.jpg

The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:

1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Caravella Mechanical Mod Stainless Steel 1 - Copy.jpg

The Caravela replica features the signature "ship" logo on its 100% stainless body by HCigar. This mod is a true 1:1 replica of the caravela. The HCigar Caravela Replica comes with three different tubes to fit different size batteries (18350, 18500, 18650). The positive and negative contact pins on this mod are silver-plated. The bottom firing button uses a spring and the locking ring on the Caravela Replica is reverse threaded.

Features:

1:1 True Replica of Caravela
Caravela Signature Ship Logo on All Three Battery Tubes
Signature Caravela "C" Logo on Bottom Firing Button
100% stainless seamless 18350, 18500, and 18650 Main Body Tube
100% stainless Top Atomizer Cap and Locking Ring
Positive and Negative Contact Pins are Silver-Plated
Internal Button Switch and Spring
Reverse Threaded Locking Ring
Recessed 510 Atomizer Connection
Adjustable 510 Contact Pin w/ Black Delrin
22mm External Diameter
HCigar Embroidered Carrying Case (Black Case- Stainless Steel Caravela Replica)

Caravela Stainless Steel Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
agat3.jpg

The AGA-T3 is a genesis style rebuildable atomizer. It features a stainless steel housing with a pyrex glass tank. It has a tank capacity of approximately 1.5 mL. The unit is rebuildable using stainless steel mesh or ceramic wick.

Stainless Steel Housing
Pyrex Glass Tank
Approx. 1.5 mL capacity
510 Threading

AGA-T3 Genesis Style Rebuildable Atomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
vision ego.jpg

The Vision eGo Spinner battery brings the classic eGo to another level! High quality matte finish with more visible markings all from Genuine Vision. This is the highest variable voltage eGo available today. You can adjust the voltage by spinner the bottom dial left or right from 3.3 - 4.8 volts. Normal eGo batteries at 1000mAh usually gets about 8 hours of battery life. This battery should get over 10+ hours of continues vaping time on one charge.

Genuine Vision Quality
1300 mAh Capcity (10+ hours)
Quality Matte Finish
Available in Black, Stainless, Blue, Red, Pink, and White
510 eGo Threaded

Vision Spinner VV eGo Battery - 1300mAh Variable Voltage - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Status
Not open for further replies.

Users who are viewing this thread