• Need help from former MFS (MyFreedomSmokes) customers

    Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?

    View thread

Official VAPE DOCTOR ECF Specials! Starter Kits | MODS | RBA/RDA | E-liquids | Drip Tips | & More!

Status
Not open for further replies.

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
vision ego.jpg

The Vision eGo Spinner battery brings the classic eGo to another level! High quality matte finish with more visible markings all from Genuine Vision. This is the highest variable voltage eGo available today. You can adjust the voltage by spinner the bottom dial left or right from 3.3 - 4.8 volts. Normal eGo batteries at 1000mAh usually gets about 8 hours of battery life. This battery should get over 10+ hours of continues vaping time on one charge.

Genuine Vision Quality
1300 mAh Capcity (10+ hours)
Quality Matte Finish
Available in Black, Stainless, Blue, Red, Pink, and White
510 eGo Threaded

http://www.vapedoctor.com/vision-spinner-vv-ego-battery-1300mah-variable-voltage/

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Last edited:

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
ihybrid.jpg

Genuine iHybrid Pure Mod are now available! Made in the USA, This hybrid genesis mod release features 5 special annodized colors including: Black, Blue, Red, Green, and Purple. These new ihybrid pures are much lighter and sleeker than the original, but packs all the performance of it's predecessor. The iHybrid features a 3ml PMMA tank, Brass contacts, Genesis atomizer tank system, and Architectural Grade 2 annodizing. The aluminum tube is anodized inside and out to improve insulation and increase voltage drops.

Power SOurce: AW IMR18490
3ml PMMA Tank
Brass Contacts
RBA: Mesh/Coil, Ceramic, Silica
Architectural Grade 2 anodizing
Add Genuine AW IMR18490 Protected batteries and Vape at a safe level with the amps you need. Buy in bulk and save.
Add NiteCore I2 Intelligent Charger to quickly charge your batteries simultaneously with LED battery monitor and safetly shut off after full charge is complete.

*Exclusive iHybrid Pure Pricing only, not valid with any other offers

Genuine iHybrid Pure 18490 - USA Hybrid Genesis Tank Mod Anodized - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
King Mechanical Mod Stainless Steel 1.jpg King Mechanical Mod Brass 1.jpg

The King Mechanical Mod Replica comes in 2 different finishes – Stainless Steel and Brass! The 18350 tube has the signature Lion emblem laser engraved onto it! The mod comes with three tubes to accommodate the 18000 series batteries including 18350, 18490, and 18650. This unit also has 510 threading on the top cap to fit a wide variety of Atomizers, Cartomizers, Clearomizers and Tanks. The top cap was designed with 4 vent holes for optimal airflow to your atomizer. Both contact pins in the unit are silver-plated. The positive pin is adjustable to prevent any battery rattling in the tube whether you are using a button or flat top battery. The King mod also features an octagonal design on the top and bottom rings to prevent any rolling around when it is lying on its side. The bottom firing button is depresses smoothly and has a locking mechanism to prevent any accidental firing.

Features:

Stainless Steel or Brass Finish
Extension tubes to accommodate 18350, 18490, 18650 batteries
Adjustable positive pin
Silver-Plated Contacts
Bottom-Firing with locking mechanism
Octagonal Rings to prevent rolling

King Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Hammer Mechanical Mod.jpg

The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:

1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Mar 07, 6 52 03 PM.jpg

The Russian 91% is a RBA (rebuildable tank atomizer) made of 304 grade stainless steel with adjustable airflow and a bottom screw fill hole. Due to its design the Russian 91% atomizers produces very flavorful vapor. The Russian 91% is very similar to the Kayfun Lite & the parts can be interchanged with the Kayfun Lite. It features a 510 threading that is compatible with most devices that use the popular 510 connection. Also there is a 510 connection adaptor for driptips and a metal tank section to replace the plastic tank section on the Russian 91%. Please take note that the clear tank is susceptible to decomposition when filled with a highly acidic or corrosive eLiquid. Usually, eLiquids that are oil based (cinnamon, peppermint, clove, etc.) tend to cause problems for these products and should be avoided.

Features:
All high quality solid stainless steel 316
Underpressure DIY Atomizer
Flavorful Vapor
Air Control
Parts are Interchangable with the Kayfun Lite
510 connection to fit most devices
510 driptip adaptor
Bottom screw, fill hole
Adjustable 510 center pin

The Russian 91% includes:
The Russian 91% with airflow control
Clear Tank
Driptip Adaptor for all 510 driptips
Metal Tank Section "used to replace the clear tank section"
Package of Silica Wick
Package of Nichrome Wire
Package of replacement screw
2 x Spare part air flow screw
2 x Spare part wick holding screw
6 x Spare O-Rings
Multipupose mini screw driver

Genuine Russian 91% - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Dec 02, 2 27 13 PM.jpg

The Aspire ET-S BDC is a new style of bottom coil clearomizer featuring dual coil heating elements to provide more vapor and better taste. ET-S is entirely constructed with metal and glass. The outer casing protects the glass, but includes a window so that you can see the level of your e-liquid at all times. This tank unit also comes with a 1.8 ohm atomizer pre-loaded.

Features:

2.5ml capacity
Bottom Dual Coil (BDC)
Pre-loaded with 1.8ohm dual coil
Will fit 510 connections WITH a 510/eGo adapter

Aspire ET-S Bottom Dual Coil (BDC) Glassomizer - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Mar 07, 6 52 03 PM.jpg

The Russian 91% is a RBA (rebuildable tank atomizer) made of 304 grade stainless steel with adjustable airflow and a bottom screw fill hole. Due to its design the Russian 91% atomizers produces very flavorful vapor. The Russian 91% is very similar to the Kayfun Lite & the parts can be interchanged with the Kayfun Lite. It features a 510 threading that is compatible with most devices that use the popular 510 connection. Also there is a 510 connection adaptor for driptips and a metal tank section to replace the plastic tank section on the Russian 91%. Please take note that the clear tank is susceptible to decomposition when filled with a highly acidic or corrosive eLiquid. Usually, eLiquids that are oil based (cinnamon, peppermint, clove, etc.) tend to cause problems for these products and should be avoided.



Features:
All high quality solid stainless steel 316
Underpressure DIY Atomizer
Flavorful Vapor
Air Control
Parts are Interchangable with the Kayfun Lite
510 connection to fit most devices
510 driptip adaptor
Bottom screw, fill hole
Adjustable 510 center pin

The Russian 91% includes:
The Russian 91% with airflow control
Clear Tank
Driptip Adaptor for all 510 driptips
Metal Tank Section "used to replace the clear tank section"
Package of Silica Wick
Package of Nichrome Wire
Package of replacement screw
2 x Spare part air flow screw
2 x Spare part wick holding screw
6 x Spare O-Rings
Multipupose mini screw driver
Gift box & instruction manual

Genuine Russian 91% - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Hammer Mechanical Mod 1.jpg

The stainless steel Hammer mod Replica by HCigar features very nice deeply engraved laser etched logos on the mod’s body, button and top cap. The Hammer replica comes with 18500 and 18650 extension tubes to accomodate larger size batteries. The Hammer Replica will come in the box setup to use an 18350 battery. The Hammer mod was ergonomically designed to sit comfortably in and contour to your hand. The Hammer does feature a button locking mechanism so it will not autofire while in your pocket. The bottom portion of the Hammer clone has multiple holes drilled for battery ventilation. The Hammer mod clone comes equipped with a 510 atomizer connection which fits most atomizers.

Features:

1:1 True Mechancial Replica
316 High Quality Stainless Steel Body
Laser Etched Engravings and Logos
Silver-Plated Connections
Airholds on the Bottom for Battery Ventilation
Button with Locking Feature
510 Atomizer Connection
22mm Diameter Top Cap
Includes:
Stainless Steel Hammer Replica By HCigar
2x Extension body tubes to fit 18500 and 18650 batteries
HCigar Hammer Mod Carrying Box

The Hammer Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
King Mechanical Mod Stainless Steel.jpg King Mechanical Mod Brass.jpg

The King Mechanical Mod Replica comes in 2 different finishes – Stainless Steel and Brass! The 18350 tube has the signature Lion emblem laser engraved onto it! The mod comes with three tubes to accommodate the 18000 series batteries including 18350, 18490, and 18650. This unit also has 510 threading on the top cap to fit a wide variety of Atomizers, Cartomizers, Clearomizers and Tanks. The top cap was designed with 4 vent holes for optimal airflow to your atomizer. Both contact pins in the unit are silver-plated. The positive pin is adjustable to prevent any battery rattling in the tube whether you are using a button or flat top battery. The King mod also features an octagonal design on the top and bottom rings to prevent any rolling around when it is lying on its side. The bottom firing button is depresses smoothly and has a locking mechanism to prevent any accidental firing.

Features:

Stainless Steel or Brass Finish
Extension tubes to accommodate 18350, 18490, 18650 batteries
Adjustable positive pin
Silver-Plated Contacts
Bottom-Firing with locking mechanism
Octagonal Rings to prevent rolling

King Mechanical Mod Replica - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
vision ego.jpg

The Vision eGo Spinner battery brings the classic eGo to another level! High quality matte finish with more visible markings all from Genuine Vision. This is the highest variable voltage eGo available today. You can adjust the voltage by spinner the bottom dial left or right from 3.3 - 4.8 volts. Normal eGo batteries at 1000mAh usually gets about 8 hours of battery life. This battery should get over 10+ hours of continues vaping time on one charge.

Genuine Vision Quality
1300 mAh Capcity (10+ hours)
Quality Matte Finish
Available in Black, Stainless, Blue, Red, Pink, and White
510 eGo Threaded

Vision Spinner VV eGo Battery - 1300mAh Variable Voltage - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Photo Dec 03, 2 44 35 PM (1).jpg

Safe Li-MN 3.7V rechargeable battery

Features:

Brand Name : MNKE
Size 18650
Type : Li-MN (HIGH DRAIN)
Rated Capacity 1500 mAh
Nominal Voltage : 3.8V
Peak Voltage : 4.2V
Additional Features:
Maximum Continuous Discharging Current : 20 Amps
Maximum Pulse Discharging Current : 60 Amps
Maximum Continuous Charging Current : 6.5 Amps
Maximum Rated Discharging Current : 30 Amps

MNKE IMR 18650 3.7v Li-MN Rechargeable Lithium Battery - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Magneto-IGOW.jpg

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
IGO-W Rebuildable Dripping atomizer - Rebuildable dripping atomizer is for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick and kanthal wires, and extra o-rings. These RBA are small but produces an extreme amount of vapor depending on how you rebuild them.

Stainless Steel
Rebuildable Atomizer
Comes with Kanthal, Silica Wick, and three screws
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.

Stainless Steel Drip Tip

Magneto/IGO-W Enthusiast Kit - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Magneto-IGOT.jpg

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
IGO-T - From the same makers that brought you the IGO-L and IGO-W, the new IGO-T is an upgraded version of the popular IGO-W. It features the same 3 hole post for easy dual coil builds. The main feature of the new IGO-T is in the new Titanium Cap Design. It now has a narrow shaped cap design made specically for more flavor. The titanium cap reduces weight while increasing durability and style.
Rebuildable atomizers are for the enthusiast who wants to get into rebuildables and mods. Stainless Steel quality, comes with silica wick, kanthal wires, and extra o-rings. The RBA Atomizer is small, but produces an extreme amount of vapor depending on how you build them.

3 Hole Post - Easy to build dual coil build
Titanium Construction
Narrow Cap Design for Extra Flavor
Extreme Vapor Production
Comes with Kanthal, Silica Wick, and three screws
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.

Stainless Steel Drip Tip

Magneto/IGO-T Enthusiast Kit - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
Magento-AGAT3.jpg

The new Smok Magneto is one of the best products we've tested from Smoktech yet! Smok releases a Fully Mechnical APV (advanced personal vaporizer) with a fully magnetic switch. This means that there are no springs involve and the firing pin floats between the two magnetic switches; giving the unit a smooth feel. Fully telescoping body allows you to use any 18000 series batteries including 18350, 18490, and 18650 IMR batteries. The mechanical mod is full stainless steel and is machined to perfection with smooth finish and nice threading over all.

Fully Mechanical Telescoping Mech Mod
Magnetic Switch
High Quality Stainless Steel Construction
510 Connection (fits most atomizers)
Fits all 18000 series batteries (18350, 18490, 18650)
AGA-T3 - The AGA-T3 is a genesis style rebuildable atomizer. It features a stainless steel housing with a pyrex glass tank. It has a tank capacity of approximately 1.5 mL. The unit is rebuildable using stainless steel mesh or ceramic wick.

Stainless Steel Housing
Pyrex Glass Tank
Approx. 1.5 mL capacity
510 Threading
eFest 18650 - These batteries outputs up to 30amps at 3.7 volts and hold 1600 mAh of capacity. This means you can have a safer vaping experience while running below 1 ohm's on your rebuildable atomizers. High drain batteries output much more power to delivery the extreme vapor production vaping enthusiasts demand.

Stainless Steel Drip Tip

Magneto/AGA-T3 Enthusiast Kit - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 

SoulFresh

Unregistered Supplier
ECF Veteran
Mar 22, 2011
1,011
11
Orange County, CA USA
ihybrid.jpg

Genuine iHybrid Pure Mod are now available! Made in the USA, This hybrid genesis mod release features 5 special annodized colors including: Black, Blue, Red, Green, and Purple. These new ihybrid pures are much lighter and sleeker than the original, but packs all the performance of it's predecessor. The iHybrid features a 3ml PMMA tank, Brass contacts, Genesis atomizer tank system, and Architectural Grade 2 annodizing. The aluminum tube is anodized inside and out to improve insulation and increase voltage drops.

Power SOurce: AW IMR18490
3ml PMMA Tank
Brass Contacts
RBA: Mesh/Coil, Ceramic, Silica
Architectural Grade 2 anodizing
Add Genuine AW IMR18490 Protected batteries and Vape at a safe level with the amps you need. Buy in bulk and save.
Add NiteCore I2 Intelligent Charger to quickly charge your batteries simultaneously with LED battery monitor and safetly shut off after full charge is complete.

*Exclusive iHybrid Pure Pricing only, not valid with any other offers

Genuine iHybrid Pure 18490 - USA Hybrid Genesis Tank Mod Anodized - Vape Doctor

Order today and receive 10% off using promo code "ECFVAPEDOCTOR"!
 
Status
Not open for further replies.

Users who are viewing this thread