-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
oh oh! vape mail!
- Thread starter KillTheNoise
- Start date
- th_trl_thread_readers 0
-
- Tags
- vamo
- Status
received some for the first time last week. the only thing I have done so far is to make a 4/5 wrap on a 1/8 porous ceramic wick. I usually use 28g and like a 2/3 wrap the best. I thought by adding an extra wrap while keeping the resistance about the same(0.7 to0.8) would be something to try. still not sure if I like it better, although the flavor might be slightly better the lag time is something you have to get used to, also the TH is diminished slightly. I believe that a 3/4 might be the solution but will definatly become the lowest resistance to date, I believe this resistance will come in about 0.5Ω.
OK, Vap, now you've gotta try this with your 26 and your stone. Its my favorite Genny wrap. I'm curious what you think. A solid 5 wraps stacked right on top of each other. coils/wraps in full contact with each other. This will give you great heat-up time and might just pop your flavor. I never tried it on stone, but maybe the newer ceramics can keep up. Try it and tell me what you think.
I have come to the conclusion with bigger wire that makes sense to me, big wire is like a bigger turbo on an engine, it may take longer to get up to speed but when it does hold on to your azz bc it's moving
It also doesn't hurt to have a battery that can dump an 8-10 amp draw without breaking a sweat.
ALLLLright.
First round before I had to goto sleep, I didn't explode lol. Made a micro coil as my first test, and it is PUMPING out some great vapor and flavor! It's either a 5/6 or a 6/7 coming out to .07 ohms, used with my orbtronics pd2900s it is AWESOME!
Working great right now, going to mix it up a little on some other RDAs after work today. Will be back with more pics!
First round before I had to goto sleep, I didn't explode lol. Made a micro coil as my first test, and it is PUMPING out some great vapor and flavor! It's either a 5/6 or a 6/7 coming out to .07 ohms, used with my orbtronics pd2900s it is AWESOME!
Working great right now, going to mix it up a little on some other RDAs after work today. Will be back with more pics!
Looks tasty, what did you use for wick? Nextel or ekowool? There is a lot of it in there, I guess I need some 26 and 28 so I can use bigger wicks
Its 1mm ekowool, maybe 4" of it looped into a circle. I'm liking the 1mm quite a lot more than the 1.5(braided) and 3mm(hollow). It seems to be wicking better and feeding more without a dry hit...I have some 2mm coming in soon, so I will know my favorite by then.
It depends on the coil but I think the 2mm wicks the best, or atleast holds enough juice to not give you a dry hit, not that a dry heat is nasty as other wicks. I can chain vape on 2mm or 1.5mm but not on the 1mm. I was using the 1mm with a micro coil so that could of had something to do with it
Yeah I heard the 2 was the best. I also have 22,23, and 24 kanthal coming as well! Can't wait!
I need to get some bigger kanthal so I can make BIG micro coils. <-- Does that even sound right??
woowaweewaaaa!
Again, 1mm ekowool running through both coils, two 'micro' 26g kanthal coils reading @ .3 ohms on my vamo and multimeter. Best dual coil I've made yet!
Again, 1mm ekowool running through both coils, two 'micro' 26g kanthal coils reading @ .3 ohms on my vamo and multimeter. Best dual coil I've made yet!
Dafuq? How'd you get a .3ohm coil to fire on a vamo? Mine shuts down and says lo at 1.2?????
Was vaping on my Natural, lol. I just build my coils on the VAMO because it's sturdy and doesn't untighten while messing around with the bases. It also checks ohms, most of the time correctly, which is kinda cool.
. . . . . .. . . . . . . . . ↑ ?. . . . . . farging English.- Status
Similar threads
