OHM Cartos: can someone get this right

[Adrena]

I have been sweating over this for a month now at least 50 threads related and everyone has their opinion. Not everyone on the same page as to units and such make the knowledge is a bit overwhelming almost inaccurate at times.
example smok Tech 2.0 Not recommended for 5 volt use or for eGo, 510, 808 or other mosfet driven batteries. But a lot of ppl that tested this out on ego's say your fine as long as we don't hotbox. Another one LR's are for 3.7V BATTERIES USE ONLY FOR BATTERIES OVER 450mah. DO NOT USE ON REGULAR ECIG BATTERIES.(egos OK)
where is the truth, what am I missing,which one is it?......
I'm so confused
I have two 650, 900mAh and a PT (love the PT) and plain to maybe get 180mah Automatic Battery soon (maybe not now). Just for the quick trips out of the house shopping and bill, kids to the park that kind of trip.(also a 510 connection).

What is safe to have as a 510 carto that I can swap between these batts?
Mind you to me it look like the 180 would not work with LR's but I should be ably to switch a safe and warm hitting carto on the others yes? Whats a good OMH for these please.

I'm wanting better cartos and want to buy a warmer stronger hit then I'm getting now.
The ce2r4's are set in OMH and I have no clue. Have one that was PIF to me on my PT and love it but am wanting to add it to my egos w/out killing them. Also looking at Smok Tech for another looser filler option. I have 4 V4L WOW cartos here I can not find ohm on them so don't know if they will kill my batts. Running low on the ones I got with my kit the ones I know it safe to use but I hate the draw of. I'll need to buy something soon. Hope the vendors can stock the ce2's and that I know which will not kill my current batts by then.

If I can just clear my way through all the info and understand what is right for me. Please if you can help my clear up what it is I'm understanding and where I'm miss informed. I think I'm learning this all wrong. Thanks

 

[Adrena]

Wrong thread sorry!

 

[mwa102464]

Your LR Attys draw more like 2Amps and a regular 2.4ohm Atty draws more like 1Amp. With that being said this is why it is recommended to use 450mAh or even higher when using an LR ANYTHING ! As far as using the LR Atty's on the 650mAh and higher 1000mAH even better Ego/Riva with the Mosfet it really is fine to do, however if your going to chain vape then you are going to heat this connection up to a point where it will fail if it gets to hot so the best way is to give it a break after a few vapes and let it cool back down.

Your 180-280 type regular Ecig Batts where not built to handle a 2Amp draw from an LR Atty, let alone they only last a short time with a regular ohm Atty and they need to be re-charged so keep with a 2.3-2.4 ohm Atty with this type of Batt power. As far as using a 2ohm on 5v this is not recommended simply because you will burn up that 2ohm Atty or carto with 5v, 5v is to much power for 2ohm in theory.

I hope this helps answer what you where asking and looking for

 

[Adrena]

Your LR Attys draw more like 2Amps and a regular 2.4ohm Atty draws more like 1Amp. With that being said this is why it is recommended to use 450mAh or even higher when using an LR ANYTHING ! As far as using the LR Atty's on the 650mAh and higher 1000mAH even better Ego/Riva with the Mosfet it really is fine to do, however if your going to chain vape then you are going to heat this connection up to a point where it will fail if it gets to hot so the best way is to give it a break after a few vapes and let it cool back down.

Your 180-280 type regular Ecig Batts where not built to handle a 2Amp draw from an LR Atty, let alone they only last a short time with a regular ohm Atty and they need to be re-charged so keep with a 2.3-2.4 ohm Atty with this type of Batt power. As far as using a 2ohm on 5v this is not recommended simply because you will burn up that 2ohm Atty or carto with 5v, 5v is to much power for 2ohm in theory.

I hope this helps answer what you where asking and looking for

So I can buy Smok Tech 2.0 for my ego batts? and ce2 2.4-2.6 OHM will they be safe too?
Thank you for trying to help me.

 

[markimar]

2 ohm cartos are perfect on ego batteries. I get mine from nhaler in stainless steel so they don't get tight in the cone . They produce great vapor but I wouldn't recommend them on anything other than the higher mah batts. Ego riva and such.

 

[Adrena]

2 ohm cartos are perfect on ego batteries. I get mine from nhaler in stainless steel so they don't get tight in the cone . They produce great vapor but I wouldn't recommend them on anything other than the higher mah batts. Ego riva and such.

Thank you, something simple I can read