Been watching a lot of videos on the AGA-T+ and I really want it! have not tinkered with any RBAs yet would getting one of these be a good idea? VAMO is on its way and I love the way the AGA-T+ looks on it and it has a tank which is a plus
-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
- Status
VAMO and AGA T+ were made for each other it seems. Im also waiting on a GG clone and looking for an IGO-L. Then i will (hopefully) stop buying gears 
VAMO and AGA T+ were made for each other it seems. Im also waiting on a GG clone and looking for an IGO-L. Then i will (hopefully) stop buying gears
Same stuff I pretty much have haha. Vamo w/ a AGA T+ and IGO-L
I got on a coop for a GG clone so waiting on that lol
I'm waiting on:
x2 K100 mech mods 1 blue, 1 champagne
x2 AGA-T2 (o-ring version not grommet version)
x2 IGO-L
x6 Efest IMR 18500 batts
x2 Efest IMR 18650 batts
Just got in my x2 evolv kicks.
I'm setting my wife and I up with new mech mods and retiring my SS ZMax2 to stand by status, and her ghetto modded maxi roughstack to deep storage status.
Cant wait to try my Chalice on a K100
x2 K100 mech mods 1 blue, 1 champagne
x2 AGA-T2 (o-ring version not grommet version)
x2 IGO-L
x6 Efest IMR 18500 batts
x2 Efest IMR 18650 batts
Just got in my x2 evolv kicks.
I'm setting my wife and I up with new mech mods and retiring my SS ZMax2 to stand by status, and her ghetto modded maxi roughstack to deep storage status.
Cant wait to try my Chalice on a K100
Im in the same coop dude
Cantseem to find the IGO though, sold out everywhere
You missed out on the co-op by a week or so, IGO-L for $8 and IGO-S for $10. AGA-T2 for $14.
If you can't find them retail the organizer announced there will be a round 3 for the AGA-T - IGO coop.
Im in the same coop dude
Cantseem to find the IGO though, sold out everywhere
Try clouds of vapor dot com
My friend picked one up from them earlier this morning
So checked back in because I am about to try it with a natural wick vs ss mesh and see all kinds of new things being mentioned. Now I will be sidetracked by searching the IGO - I am sensing some favor towards it 
I have been . . . well lazy and vaping along on a Nano for the last couple of weeks. Let the AGA-T+ rest for awhile now I have pulled her back out and good grief here we go again.
First hour of pulling it back out reminded me why I put it up - oh my goodness what makes it so appealing to spend SOOOO much time on it? Not necessary time mind you, but volunteer time lol. Not sure what I enjoy more - the building of it or the vaping. Apparentley it is the building since that is what I will sit and do for hours
I will have the thing up and running and then take it all back apart for NO reason other than just to rebuild. 
I have been . . . well lazy and vaping along on a Nano for the last couple of weeks. Let the AGA-T+ rest for awhile now I have pulled her back out and good grief here we go again.
First hour of pulling it back out reminded me why I put it up - oh my goodness what makes it so appealing to spend SOOOO much time on it? Not necessary time mind you, but volunteer time lol. Not sure what I enjoy more - the building of it or the vaping. Apparentley it is the building since that is what I will sit and do for hours
I will have the thing up and running and then take it all back apart for NO reason other than just to rebuild. 
I've had my AGA T2 working flawlessly for a few days now. I was so impressed I ordered a second one. I'm extremely pleased. I continue to laugh out loud at the clouds of vapor, and the flavor surpasses my beloved cartotanks.
I was able to locate a vendor selling pre-rolled stainless steel wicks. It turns out that was the final link in the puzzle for me. My first wick was laborous and I couldn't see myself attempting another. It also took my third attempt of a coil to find my sweetspot. I've never been a fan of low resistance, and I find a 2.0 ohm coil to my liking. I'm using 30g wire.
Some may call using a pre-rolled wick "cheating", but I don't care. I call it smart. At the same price of a cartomizer I'll gladly purchase a couple dozen of them for their convenience.
I bought a digital multimeter specifically to help me set up the AGA. But I have yet needed to take it out of the box. The Provari does everything and more. I obviously use it to check the ohms. I also use it to help me find shorts or hot spots that I can't visibly see (error codes). I prod the coil around like Zen does in his ZAP video for Provape and before long the Provari is happy. I then do the incremental low voltage to higher voltage pulsing to further oxidize the coil like Zen does.
I set the second AGA up last night in under a half hour, and it's working as well as my first. I'm a happy vapor.
I was able to locate a vendor selling pre-rolled stainless steel wicks. It turns out that was the final link in the puzzle for me. My first wick was laborous and I couldn't see myself attempting another. It also took my third attempt of a coil to find my sweetspot. I've never been a fan of low resistance, and I find a 2.0 ohm coil to my liking. I'm using 30g wire.
Some may call using a pre-rolled wick "cheating", but I don't care. I call it smart. At the same price of a cartomizer I'll gladly purchase a couple dozen of them for their convenience.
I bought a digital multimeter specifically to help me set up the AGA. But I have yet needed to take it out of the box. The Provari does everything and more. I obviously use it to check the ohms. I also use it to help me find shorts or hot spots that I can't visibly see (error codes). I prod the coil around like Zen does in his ZAP video for Provape and before long the Provari is happy. I then do the incremental low voltage to higher voltage pulsing to further oxidize the coil like Zen does.
I set the second AGA up last night in under a half hour, and it's working as well as my first. I'm a happy vapor.
Last edited:
Yes. Power source + power consumption unit, very rarely not work.
I've had my AGA T2 working flawlessly for a few days now. I was so impressed I ordered a second one. I'm extremely pleased. I continue to laugh out loud at the clouds of vapor, and the flavor surpasses my beloved cartotanks.
I was able to locate a vendor selling pre-rolled stainless steel wicks. It turns out that was the final link in the puzzle for me. My first wick was laborous and I couldn't see myself attempting another. It also took my third attempt of a coil to find my sweetspot. I've never been a fan of low resistance, and I find a 2.0 ohm coil to my liking. I'm using 30g wire.
Some may call using a pre-rolled wick "cheating", but I don't care. I call it smart. At the same price of a cartomizer I'll gladly purchase a couple dozen of them for their convenience.
I bought a digital multimeter specifically to help me set up the AGA. But I have yet needed to take it out of the box. The Provari does everything and more. I obviously use it to check the ohms. I also use it to help me find shorts or hot spots that I can't visibly see (error codes). I prod the coil around like Zen does in his ZAP video for Provape and before long the Provari is happy. I then do the incremental low voltage to higher voltage pulsing to further oxidize the coil like Zen does.
I set the second AGA up last night in under a half hour, and it's working as well as my first. I'm a happy vapor.
Hey Bad, do you need to tilt? I have to tilt sometimes especially with 12+ watts on my AGA, wondering if i still need to improve my wick.
I've had my AGA T2 working flawlessly for a few days now. I was so impressed I ordered a second one. I'm extremely pleased. I continue to laugh out loud at the clouds of vapor, and the flavor surpasses my beloved cartotanks.
I was able to locate a vendor selling pre-rolled stainless steel wicks. It turns out that was the final link in the puzzle for me. My first wick was laborous and I couldn't see myself attempting another. It also took my third attempt of a coil to find my sweetspot. I've never been a fan of low resistance, and I find a 2.0 ohm coil to my liking. I'm using 30g wire.
Some may call using a pre-rolled wick "cheating", but I don't care. I call it smart. At the same price of a cartomizer I'll gladly purchase a couple dozen of them for their convenience.
I bought a digital multimeter specifically to help me set up the AGA. But I have yet needed to take it out of the box. The Provari does everything and more. I obviously use it to check the ohms. I also use it to help me find shorts or hot spots that I can't visibly see (error codes). I prod the coil around like Zen does in his ZAP video for Provape and before long the Provari is happy. I then do the incremental low voltage to higher voltage pulsing to further oxidize the coil like Zen does.
I set the second AGA up last night in under a half hour, and it's working as well as my first. I'm a happy vapor.
who sells the pre rolled wicks? That's is why I haven't even tried mine yet. I've been waiting for ceramics. I suck at rolling things.
Hi, thanks for your answer..
I have to look into my AGA-T2 setup.. Because I have a little bit problems with my AGA-T2 tank..
- Status
Similar threads
- Locked
- Locked
