OKL2-T20 Box Mod

[AfterI]

Hey! I am going to build the OKL2-T20 but I am not sure if the items in my shopping cart is wrong or if I'm missing something... Please help me find out, I have so much stress right now! Thanks!

1 x HAMMOND
BOX, RED, 31X60X112MM
HAMMOND-1590BRD-BOX, RED, 31X60X112MM

1 x NTE ELECTRONICS
HOOK-UP WIRE, 25FT, 24AWG, CU, RED
NTE ELECTRONICS-WH24-02-25-HOOK-UP WIRE, 25FT, 24AWG, CU, RED

1 x NTE ELECTRONICS
HOOK-UP WIRE, 25FT, 24AWG, CU, BLACK
NTE ELECTRONICS-WH24-00-25-HOOK-UP WIRE, 25FT, 24AWG, CU, BLACK

1 x VISHAY DALE
RESISTOR METAL FILM, 20KOHM, 500mW, ±1%
VISHAY DALE-CMF5520K000FKEK-RESISTOR METAL FILM, 20KOHM, 500mW, ±1%

1 x C & K COMPONENTS
SLIDE SWITCH, SPDT, ON-OFF-ON
C & K COMPONENTS-1103M2S3CQE2-SLIDE SWITCH, SPDT, ON-OFF-ON

2 x TE CONNECTIVITY / RAYCHEM
FUSE, PTC RESET, 16V, 10A, RADIAL
TE CONNECTIVITY / RAYCHEM-RGEF1000.-FUSE, PTC RESET, 16V, 10A, RADIAL

1 x MURATA POWER SOLUTIONS
DC-DC CONV, NON ISO POL, 1O/P, 100W, 20A
MURATA POWER SOLUTIONS-OKL2-T/20-W12N2-C-DC-DC CONV, NON ISO POL, 1O/P, 100W, 20A

2 x TDK
CAP, MLCC, X5R, 22UF, 16V, 1210
TDK-C3225X5R1C226K250AA-CAP, MLCC, X5R, 22UF, 16V, 1210

1 x VISHAY
MOSFET, P CH, 30V, 75A, TO220AB
VISHAY-SUP75P03-07-E3-MOSFET, P CH, 30V, 75A, TO220AB

1 x TE CONNECTIVITY / CITEC
TRIMMER, POTENTIOMETER, 1KOHM 1TURN THRU HOLE
TE CONNECTIVITY / CITEC-CB10LH102M.-TRIMMER, POTENTIOMETER, 1KOHM 1TURN THRU HOLE

4 x KEMET
CAP, MLCC, X5R, 47UF, 16V, 1210
KEMET-C1210C476M4PACTU-CAP, MLCC, X5R, 47UF, 16V, 1210

View attachment Farnell element14.pdf

 

[Pattycakusu]

If it were me, and according to Mamu's guide to the raptor, I would use 18 -20 gauge hookup wire for input and output.
I'm not too experienced persay, but my quick skim through your parts looks correct to me.

 

[Relayer1974]

Tinkering with the OKL2-T20 20A 110W dc/dc converter...

 

[mamu]

Parts look correct. As mentioned, you will need 18awg or 20awg wire for input and output (carries current - Vin, Vout, GND). 24awg is only for low load wiring.