Old Goat Mods 5 volt illuminated bottomfeeder sale

[Mr. White]

I got my Old Goat 3.7 Bottom Feeder a couple of days ago, and my Cisco LR Attys and my Batts--AW IMRs, came today, so I've had a chance to put this little guys--and I do mean "little" through its paces. It works like a champ and hits like a hammer. I've got BwB Applewood going right now, and it's exceptional. I'm very impressed. It's plenty small, and to me that is a good thing. Easily fits in a pocket.

I had to pry down on the positive batter terminal just a tiny little bit, and it's fired flawlessly since that. I've had no issues with overfilling yet, but I've tried to be careful. I was a bit concerned about a 1.5 ohm atty being too hot, but it's been great so far. I'm getting tons of flavor out of this juice.

I still love my Bloog for going out, but this bottom feeder rocks, and I don't see how you could beat it for the money.

Hi Rosco, I see BwB is represented on this thread.

Mr. White

 

[Rosco]

I got my Old Goat 3.7 Bottom Feeder a couple of days ago, and my Cisco LR Attys and my Batts--AW IMRs, came today, so I've had a chance to put this little guys--and I do mean "little" through its paces. It works like a champ and hits like a hammer. I've got BwB Applewood going right now, and it's exceptional. I'm very impressed. It's plenty small, and to me that is a good thing. Easily fits in a pocket.

I had to pry down on the positive batter terminal just a tiny little bit, and it's fired flawlessly since that. I've had no issues with overfilling yet, but I've tried to be careful. I was a bit concerned about a 1.5 ohm atty being too hot, but it's been great so far. I'm getting tons of flavor out of this juice.

I still love my Bloog for going out, but this bottom feeder rocks, and I don't see how you could beat it for the money.

Hi Rosco, I see BwB is represented on this thread.

Mr. White

Hey Hey Mr LW....Glad you like your OldGoat.....I agree....Kicks like an Old Mule..
and yes....I represent...BwB

 

[^DukE^]

I got the great email from Zach asking for payment..I should have mine the first of next week...can't wait....I have my batts charged and my LR atty ready to go....

 

[pixiedust]

I got my invoice a little while ago, paid and Ron said it's going to be shipped out tomorrow woohoo!

 

[Rosco]

I got my invoice a little while ago, paid and Ron said it's going to be shipped out tomorrow woohoo!

I'm happy for ya pd...you will be taking a big step up in your vaping experience.

 

[CountVapula]

i too got the wonderful email today saying my mod was done! sent a payment, ordered batteries and a charger, cant wait to get this baby going.

 

[Rosco]

Looks like we will have a few happier vapors pretty soon. Ya'll are going to LOVE it.

 

[unfadeable]

Forgot to ask is the pipe thing that goes in the bottle brass?

 

[bmwjen]

yay!! for everyone that is expecting to get their mod this coming week! We want pics of course!!!!!

yesterday, i took my Reo Mini to work in the ER. well, my cobalt blue drip top fell off somewhere...........so today I took my old goat mod with clear pyrex tip.......heavenly. Yes, I mean heavenly.

 

[bmwjen]

i'm pretty sure the 306 drip tips do go down to cover the atty. I ordered some from avidvapes, just haven't got them yet. i'll update ya'll when I get them.

 

[Rosco]

yay!! for everyone that is expecting to get their mod this coming week! We want pics of course!!!!!

yesterday, i took my Reo Mini to work in the ER. well, my cobalt blue drip top fell off somewhere...........so today I took my old goat mod with clear pyrex tip.......heavenly. Yes, I mean heavenly.

I haven't been overly happy with my 2 pyrex drip tips. They do NOT fit like a delrin tip does. They don't go into the atty far enough and just what happened to you has happened to me several times. Luckily always in the house and after looking all over I've found it each time. I have 1 cobalt blue tapered and 1 clear tapered and neither one fits like I think they should. My cheap delrin's always stay on and these always fall off at some time. For what they charge, they should NOT fit crappy.

 

[GiMante]

Forgot to ask is the pipe thing that goes in the bottle brass?

It's stainless steel.

 

[BorisTheSpider]

It's stainless steel.

The part inside the bottle is just a plastic tube. The needle going through to the atty is indeed ss.

 

[Mvgratz]

Forgot to ask is the pipe thing that goes in the bottle brass?

If your referring to the metal piece that is embedded in the plastic feeder tube that goes from the bottle to the hole in the cup... No, I believe they are stainless steel tubes...

***They really need to fix the server in this forum***

 

[CATastrophe]

I just wanted to let folks know how much I like my Old Goat mod. I ordered a blue carbon fiber with blue LED. It turned out very nice. It has understated sparklies that just don't show well in the photos. The sparklies are the lighter areas. I didn't take a pic of the other side, but the pearl looks really nice with the blue.

I received it on Wednesday and have been using it exclusively for the last couple days. I find it works wonderfully. I love the battery life, too, since I was using a standard 510 with long batteries and those just didn't last for me - especially when I feel like chain vaping.

The feeder works nicely. There was a bit of trial and error as I flooded my atomizer a couple times. But, I've had no drips or leaks from it. I also use the mod for dripping when I don't want to swap out the feed bottle but want a quick flavor change.

I feel the mod is made well and it feels sturdy in my hand, not flimsy at all. I'm expecting it to hold up just fine. I have to say, I've really enjoyed vaping the last couple days with it.

Thanks, Old Goat for an affordable bottom feeder that looks nice. I appreciate it.

 

[Rosco]

Outstanding

 

[Pneathery]

They told me that they're mailing mine today! I cant wait. I'm getting really tired of dripping, or filling up my carto's every 5 minutes.

 

[nerak]

I just wanted to let folks know how much I like my Old Goat mod. I ordered a blue carbon fiber with blue LED. It turned out very nice. It has understated sparklies that just don't show well in the photos. The sparklies are the lighter areas. I didn't take a pic of the other side, but the pearl looks really nice with the blue.

What beautiful pictures! Priceless to those wanting to order, they will see what carbon fiber looks like. Thank you so much for sharing! Now those pics go to the website forum right?
Enjoy your vaping with the old goat mod!

 

[CATastrophe]

Thanks, Nerak. If someone wants to use those pics on the Old Goat mod forum, they are welcome to.

 

[Drottwiler]

I just wanted to let folks know how much I like my Old Goat mod. I ordered a blue carbon fiber with blue LED. It turned out very nice. It has understated sparklies that just don't show well in the photos. The sparklies are the lighter areas. I didn't take a pic of the other side, but the pearl looks really nice with the blue.

I received it on Wednesday and have been using it exclusively for the last couple days. I find it works wonderfully. I love the battery life, too, since I was using a standard 510 with long batteries and those just didn't last for me - especially when I feel like chain vaping.

The feeder works nicely. There was a bit of trial and error as I flooded my atomizer a couple times. But, I've had no drips or leaks from it. I also use the mod for dripping when I don't want to swap out the feed bottle but want a quick flavor change.

I feel the mod is made well and it feels sturdy in my hand, not flimsy at all. I'm expecting it to hold up just fine. I have to say, I've really enjoyed vaping the last couple days with it.

Thanks, Old Goat for an affordable bottom feeder that looks nice. I appreciate it.

Sure is pretty.I'm think I might need a carbon fiber one.