Old Goat Mods 5 volt illuminated bottomfeeder sale

Status
Not open for further replies.

icemanx3

Super Member
ECF Veteran
Oct 5, 2010
890
137
Silicon Valley, CA
No issues with mine yet. BTW, I dropped mine tonight from about 4.5 feet onto the concrete! It landed on the lower corner, just below the firing switch! Unbelievably I see a tiny, barely noticeable ding, and that's it. I was very surprised how well this mod held up to that kind of hit, paint job is solid.

Also dropped it last night onto the laminate flooring...hard hit and the battery cover flew off...I almost crapped but when I found the cover...all was good! WOWSA!

ice
 

oldgoat

Unregistered Supplier
ECF Veteran
Sep 7, 2010
499
223
northern wisconsin
Please do post some pics! I see many of the 3.7 and 5 v boxes but none of the Big Boxes yet.I remember when OG first found those boxes and they looked pretty nice.How are the boxes closing?;is he using magnets instead of screws? That was the one thing about those boxes the screw on back but if hes using magnets then that is so much easyer than having to unsrew screws to open it each time you need to.I'll be watching for the pics and I'm sure others also!

I have a new box that has a sliding top and a master on/off switch...I also will offer the the first box as long as my supply of them last, but the new box is alot more people friendly.

It also can vape 6 volts with unprotected cr123 batteries but I can't recommend it. I tried it myself and was surprised that it seemed smoother tasting than my 5 volts; which to me makes no sence, so I had my sons try it and they both agreed with me.

Will get some pics of the new box on the forum.

Old Goat
 

Rosco

Vaping Master
ECF Veteran
Dec 23, 2010
7,124
2,013
73
KCMO:>)
No issues with mine yet. BTW, I dropped mine tonight from about 4.5 feet onto the concrete! It landed on the lower corner, just below the firing switch! Unbelievably I see a tiny, barely noticeable ding, and that's it. I was very surprised how well this mod held up to that kind of hit, paint job is solid.

Also dropped it last night onto the laminate flooring...hard hit and the battery cover flew off...I almost crapped but when I found the cover...all was good! WOWSA!

ice

Not going to happen here. It stays around my neck thanks to the lanyard. I just tuck it inside my shirt when I want it out of the way.....which is not too often.:)
 

Lazerrred

Ultra Member
ECF Veteran
Verified Member
Aug 10, 2010
2,660
2,250
Flo SC, USA
:( My switch died on mine. Ron said he'd fix it, but was hard to wrap it up and put it in the usps priority box knowing I have to resort to carts or dripping for an undetermined amount of time.:( I almost over-nighted it but I knew with his backlog that it wouldn't make it home any faster...

Luckily I still have my original SmikeTips kit and some blank cartos, cause this is gonna be torture after getting spoiled!

Check out my post #225, and others that tried an alcohol bath. :)

I didn't have my juice top nipple on very good once and juice got alllllll down in the fire button & it quit firing, gave it some swishes in an alcohol bath a couple times in a cup. Dried her out and fires like a champ now. . Glad the alcohol didn't melt any plastic or glues
..
This may work for ya and mine is still firing great. Good luck.
 
Ron, you must have missed my post above (#1013). I sent you a PM a few days ago reporting that the top tab to my battery door is broken off. It was broken and stuck to the opening when I got it so I didn't notice for a few days that it wasn't there until the broken off tab fell out of that opening. Just thought it was a plug for the slot until then. Can you get with me regarding replacing the battery door. Thanks!
 

Pneathery

Super Member
ECF Veteran
Feb 2, 2011
384
21
Surfside Beach SC
These are the pics Zack sent me when I ordered on the 17th.
Thought yall would like to see the new Big Box. I will get yall some pics I take when I get it.
I cant wait to get it! I ordered it black with a lanyard, and hopefully a color changing LED.
I hope they dont mind that I shared them.
IMG_0497.jpg


IMG_0496.jpg
 

Pneathery

Super Member
ECF Veteran
Feb 2, 2011
384
21
Surfside Beach SC
I can't wait to get mine, it holds 7ml in the bottle, and I bought 4 battery BOX'S from the battery vendor, so I can carry one 18650 battery and one bottle of juice in each box. So all I have to grab when I leave the house is that box, and my old goat mod that is already on a lanyard! Thats been my wife's biggest ..... about me and vaping, is that it can take me a half an hour to get ready to walk out the door, because of all of the filling, and bottles, and charger, and batteries I have to bring with me. The ego's are good, but I only get 6 hours out of each battery, so I usually want at least three with me, and some way to charge them. Ayway I'm really exited about getting this mod, and my ability to VAPE all day without needing to do any filling, or change batteries or anything. Plus if I get bored I can buy some protected 3.7 volt batteries, and VAPE @7.4 volts! But for now I'll stick with my 1.5, 2.0, 2.2 ohm attys! I'm really exited if y'all can't tell, and my wife got really tired about hearing about vaping long ago, and she vapes too. So I ramble on and on to y'all. Sorry.
 

CountVapula

Senior Member
ECF Veteran
Mar 11, 2011
223
24
MA
I'm really exited about getting this mod, and my ability to VAPE all day without needing to do any filling, or change batteries or anything.

im so excited to take this thing out with me tomorrow... just the bottomfeeder and an extra battery, instead of 2 bottles of juice, 3 batteries, and 2 atomizers all in an awkward case. the fact that i can drive to work tomorrow, and not take my eyes off the road to drip, is awesome, just drive and vape away!

also, ive been using this thing for a few hours now and havent had one overfilling issue. ive found that if i squeeze the bottle and take a draw on the atty until i hear the juice come up into it, im good to go. i havent even seen a drop in the reservoir yet, even when trying to flood the atty just to see what would happen. do most of you squeeze the bottle until you see juice collect in the reservoir? ive also checked inside and not a drop, this thing works flawlessly.
 

Mvgratz

Vaping Master
ECF Veteran
Verified Member
Jan 29, 2011
7,655
5,650
55
Alabama
Plus if I get bored I can buy some protected 3.7 volt batteries, and VAPE @7.4 volts!

Correct me if I'm wrong but I believe it would only be possible to use 2 3v cr123 batts and vape at 6v. I may be wrong but I just don't see ya fitting 2 protected 14500's in there in series...
 

Pneathery

Super Member
ECF Veteran
Feb 2, 2011
384
21
Surfside Beach SC
Correct me if I'm wrong but I believe it would only be possible to use 2 3v cr123 batts and vape at 6v. I may be wrong but I just don't see ya fitting 2 protected 14500's in there in series...

I think alot of them are 3.7, and some are 3 volt. It all depends on the cr123 that you buy, at least thats what my memory was telling me when I posted that, but now that im thinking about it, you may be right.
 

pixiedust

Super Member
ECF Veteran
Verified Member
Jan 23, 2011
436
19
Nevada
whee...I got my old goat! I love it, it's so little which is great because I have small hands. I had no problems filling the bottle or inserting it. Knowing when to squeeze is more of an art than a science and I'm still working on perfecting that..but so far, so good The picture is with an LR 306 atty and cannon drip tip =) I think I will be vaping less with this because it's so...satisfying!
og.jpg
 

icemanx3

Super Member
ECF Veteran
Oct 5, 2010
890
137
Silicon Valley, CA
im so excited to take this thing out with me tomorrow... just the bottomfeeder and an extra battery, instead of 2 bottles of juice, 3 batteries, and 2 atomizers all in an awkward case. the fact that i can drive to work tomorrow, and not take my eyes off the road to drip, is awesome, just drive and vape away!

also, ive been using this thing for a few hours now and havent had one overfilling issue. ive found that if i squeeze the bottle and take a draw on the atty until i hear the juice come up into it, im good to go. i havent even seen a drop in the reservoir yet, even when trying to flood the atty just to see what would happen. do most of you squeeze the bottle until you see juice collect in the reservoir? ive also checked inside and not a drop, this thing works flawlessly.

That's AWESOME! BTW, you may not even need the extra battery. Of course bring it just in case (I do too), but one battery lasts me all day, and I chain vape them. Meaning on the road to and from work, at my desk, at home...LOL!

ice
 

icemanx3

Super Member
ECF Veteran
Oct 5, 2010
890
137
Silicon Valley, CA
whee...I got my old goat! I love it, it's so little which is great because I have small hands. I had no problems filling the bottle or inserting it. Knowing when to squeeze is more of an art than a science and I'm still working on perfecting that..but so far, so good The picture is with an LR 306 atty and cannon drip tip =) I think I will be vaping less with this because it's so...satisfying!
og.jpg

That's the ultimate set-up...with the 306 and the cannon. GOOD WORK! Happy vaping, really nice looking!

ice
 
Status
Not open for further replies.

Users who are viewing this thread