Older Folks and Vaping Back Porch - Part Four

Status
Not open for further replies.

Rotowoman

Super Member
ECF Veteran
Sep 27, 2014
639
15,388
Louisiana

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
I figure I'm pretty well pickled on a regular basis and that sanitizing my Nic Storage Bottles is overkill .. ;) .. if whatever residue of whatever is still inside the bottle, oh well .. of course, if I keeled over one day and that was the cause, "Who ya Gonna Call .. ??" .. ;)

and I'll edit this to add : I also reuse my liquid bottles and I don't clean them out either between refills .. in fact, I've even been known to put a different flavor liquid in a bottle without rinsing .. I know, the Horror ;), but I do draw the line when they start to yellow ..
Yep when the juice I put in starts to taste like plastic I give them a rinse in hot water only happened 3 or 4 times so far. I make my juice in 100ml lots and use the same bottles sort of like sourdough bread.
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
I made up my mind, amazing huh? No DNA200 for me they are having too much trouble with them. The boards are just going out and you have the choice of removing the board yourself and returning it to EVOLV then putting them back in or returning it to the vendor and waiting a month for them to do it. I have also decided I'm going to stick to Ti. I don't dry burn it and never use it above 420F clean it by washing it under hot water. I like the way the NiFe is to use but just enough is not known about dryburning nickel then vaping it. Ti is a little more of a hassle but I think a lot safer unless you are like some that bring it to a pinkish glow to clean it or you don't use it on a TC device. As far as the bottles I'm not going to worry about it. I do wash them if I'm going to change flavors in it but that's it. But if it going to be the same it's like leaving a little seed in there. Pre steeped in effect.
 

Debadoo

ECF Guru
ECF Veteran
Verified Member
May 18, 2012
18,052
133,969
Texas, near Fort Hood
Fax me some sounds delicious.

Mine have a slick coating on them, the liquid beads up on it. Not good?
Mine do too. I figger for all the longer nic will be in those bottles it's fine. Once I can sell some stuff and get other things I need, I may look into them, cuz I'm sure it would better. By the time I get to the end of this nic, I'll let ya know, but so far so good, been in there since around Feb or March.
Be careful just getting caps. I've heard folks say that a lotta times if you buy caps separately they don't always fit the bottles, particularly if you get them other places. I don't know but would expect that might be even more so if one of those places is Amazon
 

Butch

Vaping Master
ECF Veteran
Verified Member
Nov 20, 2011
7,243
31,637
433 miles north. of the Alamo
Good morning everyone. Hope you all have a great day! :)
You mean it' dadgum mornin' already.........

dog+face+g.jpg
 

DancingHeretik

Dancing in the Chaos
ECF Veteran
Verified Member
Mar 20, 2011
8,837
62,106
San Antonio, TX
When we fly we put a piece of plastic across the opening of the juice bottle and then screw on the lid. If you don't have the lids with the plastic inside wouldn't that work with the glass bottles of nic for storage?
I chose poly-cone (or whatever) lids because I was afraid of the PG and nic possibly reacting to other materials, not so much to just seal. So, I don't know about paper/cardboard or plastic wrap. This is for long term storage. After 10 or 20 years, who knows?
 

runamok

Senior Member
ECF Veteran
Verified Member
Nov 27, 2014
152
7,043
Georgia
I'm hooked on ?"REO's" poster child. I now own 3. Black LP'd w/sl door sporting a black Derringer, Hammerer gray SL/LP sporting a SS Derringer, and a raw SL/and RM2 that I just flooded to the point of juice running out of the air hole. I'd got used to the Derringer's larger dia. and over squonked the rm2. Now I have a slimey reo.
 

runamok

Senior Member
ECF Veteran
Verified Member
Nov 27, 2014
152
7,043
Georgia
Update on the
life and crimes of Runamok. I had the water pump on my truck die overnight, Wednesday no problem, Thursday a.m. got to work and it's leaking like a sieve. So I dropped it off w/ my mechanic and walked home, I'm way outta shape for a 5 mile hike.
I saw a soccer ball in the ditch and decided this was cool, picked it up and was bouncing it on the sidewalk to get the flurb off it when it went funny, swept my foot out to nudge it back and stepped on it.....down goes my old .... flat out on my donkey and bang the back o my head on the sidewalk. I felt like a blindsided Quarterback. I can no longer play soccer. A Lady saw my crash and burn and stopped to ask if I was ok. I said the only injury was my pride, except I've stressed most of my major mussel groups trying not to break my ..... Reminded me I'm not a kid anymore. $350.00 later I got my truck back. Now though I'm dealing with monetary anemia cause my reserves are gone. Anyone want to buy a soccer ball?
 

2legsshrt

Resting In Peace
ECF Veteran
Oct 19, 2009
7,162
107,789
75
Spokane,WA
Mine do too. I figger for all the longer nic will be in those bottles it's fine. Once I can sell some stuff and get other things I need, I may look into them, cuz I'm sure it would better. By the time I get to the end of this nic, I'll let ya know, but so far so good, been in there since around Feb or March.

Be careful just getting caps. I've heard folks say that a lotta times if you buy caps separately they don't always fit the bottles, particularly if you get them other places. I don't know but would expect that might be even more so if one of those places is Amazon
Yeah the bottles I got from MFS have a smooth inside. I think when I bottle it up once sealed it will be fine I hope. When I open one I will replace it with one of my phenolic caps. I hope that will be ok. They didn't have the phenolic caps when I ordered the bottle so I just got the standard ones.
 

DavidOck

ECF Guru
Supporting Member
ECF Veteran
Jan 3, 2013
21,239
178,490
Halfway to Paradise, WA
Mine have a slick coating on them, the liquid beads up on it. Not good?

When we fly we put a piece of plastic across the opening of the juice bottle and then screw on the lid. If you don't have the lids with the plastic inside wouldn't that work with the glass bottles of nic for storage?

I think the slick coating is plastic, i.e. plasticised paper. Should be fine, but will fall apart after repeated use.

And I use the small square of plastic wrap between cap and bottle for long term (freezer) storage. May provide a better air-tight seal.

Just took advantage of the 17NOVMFS coupon code and ordered a 5 pack of the STM 1.2 ohm coils.
Must be losin my little mind....

Nope, not until you get some kanthal and rayon and start rebuilding them :)

(And since you already rebuild T3S heads, those should be a snap. Although the RBA deck for those is even easier... )
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,639
114,680
Downingtown, PA
Update on the
life and crimes of Runamok. I had the water pump on my truck die overnight, Wednesday no problem, Thursday a.m. got to work and it's leaking like a sieve. So I dropped it off w/ my mechanic and walked home, I'm way outta shape for a 5 mile hike.
I saw a soccer ball in the ditch and decided this was cool, picked it up and was bouncing it on the sidewalk to get the flurb off it when it went funny, swept my foot out to nudge it back and stepped on it.....down goes my old .... flat out on my donkey and bang the back o my head on the sidewalk. I felt like a blindsided Quarterback. I can no longer play soccer. A Lady saw my crash and burn and stopped to ask if I was ok. I said the only injury was my pride, except I've stressed most of my major mussel groups trying not to break my ..... Reminded me I'm not a kid anymore. $350.00 later I got my truck back. Now though I'm dealing with monetary anemia cause my reserves are gone. Anyone want to buy a soccer ball?

In soccer terms isn't that called 'doing a header':D ?
 
Status
Not open for further replies.

Users who are viewing this thread