Older Folks and Vaping Front Porch - Part 2

[PapaSloth]

Who are you talking to? Do you know English?
If I concentrate, more than I want to I can follow you but why would I bother?
Break it down a little for us layman!
I drilled out the air hole to ---- and drilled out the center shaft to ----- now it works better!

More better, work gooder. Much air, yum!

 

[eratikmind]

Someone needs to lower their nic content/intake.

 

[sushigirl]

No problem on the cancer. Had lung cancer 2 1/2 years ago. They took the bottom half of my right lung. No chemo or radiation needed. Very early detection. I was extremely lucky. I had pneumonia and they saw the tumor on the xray. Dectected on April 8th 2012 and surgery on May 9th 2012. Quick like a bunny. The big problem is I already had COPD and losing 1/2 a lung hasn't helped. Breathing can be a class a b..ch sometimes but, vaping has helped a bunch. Cancer and smoke free for 2 3/4 years now.

Sent from my Galaxy Note 2 Android phone on a keyboard that waaayyy too small (or my thumbs are waaayyy too big).

That's AWESOME Matt!!!!! Congratulations! When are you guys planning on moving to FL?

Hello everyone. Are young 'uns welcome here?

Absolutley! We don't check ID's around here. Welcome!!! Feel free to tell us a little bit about yourself...how long ya been vaping? We love stories!

 

[FlamingoTutu]

For those that don't know, these are forced patina on mech mods. Copper and brass. What you do is suspend them over a ammonia and salt bath and " force" them to corrode till you like the color they are. Wash them off, dry and clear coat. You now have a one of a kind patina mod. There is more to it but not much. I am more that willing to answer any questions! Or explain further! View attachment 372081 View attachment 372082

The patinas are gorgeous! They really deserve centerfold treatment.

Someone needs to lower their nic content/intake.

 

[mekc57]

More better, work gooder. Much air, yum!

I'm sorry Bogy
Info overload !
You have a tendency to get carried away with details sometimes.

 

[mekc57]

The patinas are gorgeous! They really deserve centerfold treatment.
Thank you, thank you very much

 

[Myrany]

The patinas are gorgeous! They really deserve centerfold treatment.
Thank you, thank you very much

Why did I hear that in Elvis voice?

In other news I killed off the bottle of NJoy liquid. The bottles they use have a long skinny dripper tip that I suspect would be great for the variant of Kayfun/Russian that requires that. Unfortunately they are a pita to get the tip off to wash the bottles. I had to take plyers to it.

 

[Slots]

Hello everyone. Are young 'uns welcome here?

Welcome here ??? Of course, pull up a seat and tell us your story.
It's not bedtime, but we're snoopy

 

[MattB101]

Oh man, you were lucky! My father had half a lung removed something like 55 years ago. He's 90 now and still chugging along quite nicely.He has hereditary heart problems.Stroke, heart attack, triple bypass and pace maker. If ever there was a walking billboard for taking care of yourself and listening to your doctor (IF you have a good one), he's it.

2 3/4 years, Yeehaw! They can't do anything to help your breathing?

Let's move this to the back porch. See you there.

Sent from my Galaxy Note 2 Android phone on a keyboard that waaayyy too small (or my thumbs are waaayyy too big).

 

[MattB101]

Who are you talking to? Do you know English?
If I concentrate, more than I want to I can follow you but why would I bother?
Break it down a little for us layman!
I drilled out the air hole to ---- and drilled out the center shaft to ----- now it works better!

I followed no problem but I can see where some may not. ooohh technical!

Sent from my Galaxy Note 2 Android phone on a keyboard that waaayyy too small (or my thumbs are waaayyy too big).

 

[MattB101]

That's AWESOME Matt!!!!! Congratulations! When are you guys planning on moving to FL?





Absolutley! We don't check ID's around here. Welcome!!! Feel free to tell us a little bit about yourself...how long ya been vaping? We love stories!

I thought we would have been there by now but, my health has slowed down the preps for selling the house. I have to finish the new flooring and recoat the deck so we can put it on the market then we're outta here.

Sent from my Galaxy Note 2 Android phone on a keyboard that waaayyy too small (or my thumbs are waaayyy too big).

 

[MikeE3]

I already had the air adjustment screw all the way backed off, and it was still a very tight draw. This is the Infinite KFL+ V2 by the way, which has the air adjustment set screw on the bottom, not the KFL+ which has the air adjusment screw on the side. The full air path goes from the side air hole, which was less than 1/16th (maybe 3/64ths or there abouts), across the air adjustment screw, into the central shaft, through the air hole on the side of the center pin, and up vertically through the center pin (which was right around 1/16th). I increased the diameter of the side airhole all the way through to the central shaft to about 5/64ths, and smoothed out the vertical air channel in the center pin to a smidge over 1/16th. So, at the tightest point, I increased the air diameter from around 3/64th to a little over 1/16th. This might not sound like much, but air flow is related to the square of the diameter, so I got a net increase in air flow of around 78%. (1/16)^2/(3/64)^2 is 1.777... So, even though it's a minor mod, it almost doubled the airflow.

Wait, wait ... let me check w/ my old faithful reference book.

 

[Janet H]

Don't hold me to it but think they are talking about this lovely vape porn http://www.e-cigarette-forum.com/fo...ng-front-porch-part-2-a-978.html#post14090796

Good grief! I missed a whole page!!! Must have missed it when I was trying to catch up. Thanks.

For those that don't know, these are forced patina on mech mods. Copper and brass. What you do is suspend them over a ammonia and salt bath and " force" them to corrode till you like the color they are. Wash them off, dry and clear coat. You now have a one of a kind patina mod. There is more to it but not much. I am more that willing to answer any questions! Or explain further! View attachment 372081 View attachment 372082

They're gorgeous! Love the look!

Why did I hear that in Elvis voice?

In other news I killed off the bottle of NJoy liquid. The bottles they use have a long skinny dripper tip that I suspect would be great for the variant of Kayfun/Russian that requires that. Unfortunately they are a pita to get the tip off to wash the bottles. I had to take plyers to it.

I have some bottle tips that don't want to come off too. If I push a knife blade between the tip and the bottle a lift it'll usually pop off. Just be careful not to cut the bottle.

 

[DavidOck]

Or your fingers....

 

[3mg Meniere]

My right thumbnail has a chronic split. I usually use my needle-nose pliers. Sometimes I can flip the nipple off (please disregard play on words). But with the pointed ones, pliers are first choice.

 

[Iffy]

Hello everyone. Are young 'uns welcome here?

"Hey Mike, do we have any extra highchairs left?"

Texas,

Anyone old enough to find da porch is ol' 'nuff to grab a rocking chair. Pull one up and sit a spell.

 

[MattB101]

My right thumbnail has a chronic split. I usually use my needle-nose pliers. Sometimes I can flip the nipple off (please disregard play on words). But with the pointed ones, pliers are first choice.

Too good to ignore! Pliers?

Sent from my Galaxy Note 2 Android phone on a keyboard that waaayyy too small (or my thumbs are waaayyy too big).

 

[mekc57]

Why did I hear that in Elvis voice?

In other news I killed off the bottle of NJoy liquid. The bottles they use have a long skinny dripper tip that I suspect would be great for the variant of Kayfun/Russian that requires that. Unfortunately they are a pita to get the tip off to wash the bottles. I had to take plyers to it.

Yup, that was an elvis

I got one of the last kayfun mini's and it fills well through the fill port but the clones I picked up are top fill only. The little valve in the fill hole just doesn't work worth a dam. Just another clone down fall. I haven't checked to see if kayfun ever started up with the mini's again.

 

[FlamingoTutu]

Why did I hear that in Elvis voice?

In other news I killed off the bottle of NJoy liquid. The bottles they use have a long skinny dripper tip that I suspect would be great for the variant of Kayfun/Russian that requires that. Unfortunately they are a pita to get the tip off to wash the bottles. I had to take plyers to it.

Thank you for that. Is the tip on the NJoy longer than the empty bottle tip you get from Wizard Labs? I looked all over trying to find a picture of an NJoy bottle, not box, and discovered they make 10mg too. Bottle will apparently cost you $7.99 to see.

 

[Iowa Gal]

Good evening..finally caught up had a busy weekend so wasn't on much. Bedazzle has more Nautius Mini tubes up for anyone interested. I need to rewick my KFL/s and Reos tonight...but the coils are good so it won't take me long.