-
Need help from former MFS (MyFreedomSmokes) customers
Has any found a supplier or company that has tobacco e-juice like or very similar to MFS Turbosmog, Tall Paul, or Red Luck?
View thread
Older Folks and Vaping Front Porch - Part 5
- Thread starter MikeE3
- Start date
- th_trl_thread_readers 0
- Status
Yeah you are right here is mine with my profiles that I put in it also shows how accurate it is.
I didn't go far enough over but if I would've you would see how accurate it is at the set temp also.
I didn't go far enough over but if I would've you would see how accurate it is at the set temp also.
I figured out how to download the .csv files for the battery kind of a round about way but it seems the way I do everything with the DNA's. When on Manufacturers mode and go to the mod tab in Escribe this is what your set up should look like for 2 batteries.
To get to manufacturers mode choose Options>UserInterface and select Manufacturers
Then you will have access to all the settings.
Then you will have access to all the settings.
You have to make sure that the battery setup is the same as what I have 2 cell, 22.2 Wh if you have 3000mAh batteries and if you see the cell soft cut off that is where you put what you want the batteries to run down to before it cuts off. If you get the .csv file from the site for the batteries you are using, then you use load csv file and it will take you to file manager and pick the file you DL then save profile then upload to mod.
No I understand what kind of reading you are getting but when you go into tab Mod are your settings similar to mine with the 2 cell and the Wh, that could be part of the problem. What do your settings look like when you go into the Mod tab?
Don't worry about the profile now just make sure that your mod is set up for a 2 battery system. But like I say you can get better info from Evolve Forum but I know that many of them are not set up right in the battery part which is an easy fix.
My stoopid HCigar came with the stock settings for the DNA chip which is set for a 3 cell LiPo battery. But that was mine I was having all kinds of problems with the battery and the wires. I had to learn how to use Escribe to get it to work correctly or at all for that matter.
Well that's crazy. I figured I had no business going into the Researcher or Manufacturer settings.
Still, there's nothing there that's going to make my mod stop reading "Cell 1" as having a 0.01 volt charge, or that's going to make it read atomizer resistance, or that's going to make it able to fire.
I probably forgot to mention it before, but my mod is broken.
If you read this thread on the Evolv Forum, you'll see that my mod(s), both the HCigar Vt 167 and the Therion DNA166, are broken. The incorrect battery voltages on my broken mods are the same as shown by other people in this thread, and the moderator says the DNA 250 chips are defective.
Hcigar Vt167 Battery Check (DNA250)
Hcigar Vt167 Battery Check (DNA250)
Sorry Dave I get a little carried away on a DNA. But I do know that some come not set up. I don't know if it's lazy sellers or what but those settings I showed you are the same if it a DNA75 or 250 aor any for that matter. It's like they figure it's not important, really ticked me off when I got mine and it didn't work right at all. I thought it was defective but it was just a few settings.
No you did several times and when you go into the Mod tab it is set for LiPo 2 cell correct?Well that's crazy. I figured I had no business going into the Researcher or Manufacturer settings.
Still, there's nothing there that's going to make my mod stop reading "Cell 1" as having a 0.01 volt charge, or that's going to make it read atomizer resistance, or that's going to make it able to fire.
I probably forgot to mention it before, but my mod is broken.
Dave me thinks you have a broke mod. Or did you figure that out. I would contact Evolve, I've heard of people getting them replaced no matter how far out of warranty they are. They used too really stand behind their boards.
I gotta wonder why the seller should be responsible for setup. In my opinion it should be done at the factory.
They still do, but you're not listening again. I can get a replacement for the broken Therion from the seller, and he paid for return shipping. I think I can get a replacement for the HCigar from the seller, but if I have to pay for trackable shipping back to China, I'll take advantage of Evolv's one year guarantee instead.
Mine too. It's really a big deal for someone just used to taking a mod out of the box charging it or putting batteries in and using it especially a DNA. I had 2 that weren't set up 1 HCigar and 1 Lavabox that I bought directly from Volcano. Both my Lost Vapes were close but you know what they say about that. I had to take a quick course in DNA's. I was really disappointed but was really happy after it was dialed in. And as far as these Chinese mod I have read post after post that they got theirs with wires not connected which could be your problem but stuff like that, that for me isn't good, I can't just take one apart and re solder. As far as that goes I also heard of guys taking their boards out and sending them to Evolve and they replaced it right away but not something I would have any idea how to do.
You haven't noticed that before if my brain is engaged my ears are not and visa versa. Same problem I have with my mouth. Like my wife says I can only do 1 thing at a time if I try more I forget what I'm doing with the 1st. Definately no a multi tasker.
- Status
Similar threads
