Older Folks and Vaping Front Porch - Part Four

Status
Not open for further replies.

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
I only have slant tops and use the beauty ring to flatten it out. Mike should be around somewhere to answer that since the Radius has the P3 connection.

I know that you need to use an ego adapter for my 2.5's to take those types of toppers. :)
So the standard 2.5 connector has to have an adaptor to use a 510 tank?
 

mmsjs5

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2009
1,527
6,728
Illinois
No, I use my kayfun's without an adapter, but if you want to use something like a T3S, you will need an ego adapter for it to connect.

Provari 2.5's don't have an ego connection but they do take standard 510's. Sorry I didn't really say that right in my 1st response. :)
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
No, I use my Kayfun's without an adapter, but if you want to use something like a T3S, you will need an ego adapter for it to connect.

Provari 2.5's don't have an ego connection but they do take standard 510's. Sorry I didn't really say that right in my 1st response. :)
Ok, I got it now! TY!
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
Now I need to get a charger for her. Ivm on RTD site. Getting a better price on the AW IMR nipple top batteries than at Provape. I need to get her a charger, too. I use an Intelicharger i2. Would that work for those batts? All mine are flat tops. This is why I never went with Provaris.
 

FlamingoTutu

ECF Guru
Supporting Member
ECF Veteran
Aug 5, 2013
11,199
1
57,730
In the Mountains
Thanks, those pompom dudes look vaguely familiar. :lol:
Don't remind me ... I successfully resisted the sale and the really low prices on the blames. Between Janet and me, we have 11 Provari's in the house. I keep resisting making it an even dozen.

Edit: Oh wait ... I forgot 1, we do have a dozen. Now I'll have to start resisting having a bakers dozen. :D
So, did you make it a baker's dozen? :)
Attaboy girl, phippin' phantastic! How 'bout a perpherating hug? Congrats on da third...
snoopy.gif
snoopy.gif
snoopy.gif


Were they advocating vaping? Or just against smoking?

Now dat's just so kewl!

Not much as pleasant as fresh joose and a 'new' atty!
thumbsup.gif
Can't wait until it's 20 years and I have a stampede of dancing Snoopys. :D Thanks Iffstah!
I haven't tried the rayon in any of my squonkers yet.
I use it in my tanks, but I didn't think it would hold up in the Stumpy's, Nuppins, RM's, etc
What were you using before.. the KDG, Bacon ????
Nice to see you Slots! Loved the KGD, cornered the market. Then David sent some rayon. It was better. :( I'm thinkin' I can dye some of the KGD and make a quilt and not feel guilty about moving on to rayon before the KGD is used up, lol.
not sure.... when I saw the booth, the lady was talking to someone.

Thanks. I did a 3D print for a holder, and It is ok... I just wanted something with a bit more pop, so I 3D printed this guy and even did some painting!
View attachment 539667

View attachment 539668

View attachment 539669

View attachment 539670

View attachment 539671

Like how I nestled the lighthouse in the back of the holder?
Took some doing, this model took me about an hour to put together.
Then 15 min to slice and get to the printer. Printer took a bit over an hour to print it out.
Ken, I love that stand! Love your pip too. Nice job!
I have a question for all the Provari peeps here. I don't have one so have no idea if I got the right thing or not.
I bought 2 of the Classic style in the sale on Monday. I ordered them with the P3 510. I know this is the flat top connector. I want to make sure that they'll be able to use any topper on them.
Looks like it's been answered but congratulations on the ProVaris!
 

FlamingoTutu

ECF Guru
Supporting Member
ECF Veteran
Aug 5, 2013
11,199
1
57,730
In the Mountains
Now I need to get a charger for her. Ivm on RTD site. Getting a better price on the AW IMR nipple top batteries than at Provape. I need to get her a charger, too. I use an Intelicharger i2. Would that work for those batts? All mine are flat tops. This is why I never went with Provaris.
Yes, that's what I use with mine, four bay though.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
I have a question for all the Provari peeps here. I don't have one so have no idea if I got the right thing or not.
I bought 2 of the Classic style in the sale on Monday. I ordered them with the P3 510. I know this is the flat top connector. I want to make sure that they'll be able to use any topper on them.
Yes the Classic's will take any 510 and they used to come with an ego adapter but that was years ago. The P3 will take any Connection. ( 510, Ego, & P3 Hybrid Style) But Adapters are sold on ProVape website and not part of the Kit
 

MikeE3

Vaping Master
Supporting Member
ECF Veteran
Verified Member
Aug 23, 2011
8,639
114,680
Downingtown, PA
Absolutely! We affectionately refer to each other as "Rayonati" over there, and JeremyR is where it all started. He's done tons of research on it and worked out a LOT of the problems. The best part is that he's so willing to share any and all information and readily helps anyone who asks. He's a great guy and I'm glad that he's shared his knowledge and experience with the rest of us. That is the second thread because we ran the first one clean outta posts... but it's still around and has a lot of good info in it too if you ever have the time to read back through it. Either way, a lot of us from the first thread still hang around the newer one, so feel free to jump in at any point. It's a really friendly and helpful bunch... just don't be surprised if ya hear a lotta people bashing cotton! :lol: ;)

I was there in the beginning of the 1st rayon thread. It's what got be started. I was using KGD .. tried rayon and couldn't get the 'squeak' right so went back to rayon. A month later I gave rayon another try and it 'squeaked' real nice. Haven't used anything else since.

Far as I know all the Provari's take any 510 tank.

Yep ... that's correct ... you didn't have to recant it.

So, did you make it a baker's dozen?

Nope ... holding strong ... but now they have yet another sale for St. Paddy's day.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
I was there in the beginning of the 1st rayon thread. It's what got be started. I was using KGD .. tried rayon and couldn't get the 'squeak' right so went back to rayon. A month later I gave rayon another try and it 'squeaked' real nice. Haven't used anything else since.
For me it depends on what the Coil is on. For example I like Rayon in the KFMv2.1ES, since the Build Deck is so tiny. Larger Decks I like KGD. Just my preference I guess. But since experimenting I have plenty of all of the above and I'm sure over the course of time it will get used. :D Sure is nice though reading through the technical explanations/reasoning of use. I sure appreciate it; because I'm not that technical in that aspect.:thumb:
 

mmsjs5

Ultra Member
ECF Veteran
Verified Member
Dec 29, 2009
1,527
6,728
Illinois
Nope ... holding strong ... but now they have yet another sale for St. Paddy's day.

Gotta do it now or never, from what I've read they are discontinuing the 2.5's :( . I bought my more than fair share, now it's your turn. :)
 

Kenna

Vaping Master
ECF Veteran
Verified Member
Aug 14, 2014
7,367
121,493
Texas, USA
Yes the Classic's will take any 510 and they used to come with an ego adapter but that was years ago. The P3 will take any Connection. ( 510, Ego, & P3 Hybrid Style) But Adapters are sold on ProVape website and not part of the Kit
A P3 510 & beauty ring were options available with the blems so I chose those. They were a 20.00 chg.
 

subwayaznm

A Geek with a Cool slice
Verified Member
Jan 24, 2016
1,433
6,323
USA
Now I need to get a charger for her. Ivm on RTD site. Getting a better price on the AW IMR nipple top batteries than at Provape. I need to get her a charger, too. I use an Intelicharger i2. Would that work for those batts? All mine are flat tops. This is why I never went with Provaris.
You should be good with that Charger.
 

Slots

Ultra Member
ECF Veteran
Verified Member
Dec 20, 2012
2,793
15,747
Eastern Wa.
Nice to see you Slots! Loved the KGD, cornered the market. Then David sent some rayon. It was better. :( I'm thinkin' I can dye some of the KGD and make a quilt and not feel guilty about moving on to rayon before the KGD is used up, lol.
Well, if you buy the typical box of rayon, you can trim that blanket with it, and keep your tootsies warm as you age, while you use up that 1/4 mile of rayon :p
Like me, your gunna get old before you see the bottom of that box ..
Good thing it doesn't have a "pull date" :cry:

Now Provape runs Sales; sure now that I've got mine. :lol:
Ditto Ditto Ditto .. it kills me to see the prices (on the ones I bought) now .. don't look, must not look :censored:
 
Status
Not open for further replies.

Users who are viewing this thread