anybody get an eleaf iStick 50w that doesn't function properly?I'm so very disapponited....![]()
anybody get an eleaf iStick 50w that doesn't function properly?I'm so very disapponited....![]()
Yep....got it from a vendor. Had purchased one for a friend....he loves it....so I splurged on my birthday and got myself one. Charged it, put my atlantis on it and after about 5 puffs.....power low on screen. Thought perhaps the tank....changed to a nautilus.....changed the settings for that particular tank, and it was good...for that afternoon. battery icon showing at least 7/8 full, until I tried to use it again..... power low on screen and won't fire. Doesn't matter how long it's charged.....the icon goes off showing fully charged .....until I try to use it. Sometimes I can get 4 or 5 puffs before it stops working. Afraid to keep charging the battery, since it doesn't seem to do any good and I don't want the thing to explode.Oh no! What's going on with yours? While many folks have them and like them - it's not uncommon to hear about faulty ones.
Did you buy it from a vendor? Depending on vendor I'm hears anywhere from 30 to 90 day warranty periods.
I have neither the equipment nor the knowledge to make a video and send it. Very sad, as I wasn't asking for a refund....just want to return this for one that works
Wow, jup that's a tad excessive!It is sort of but nickel has such a low resistance to build a 1 ohm coil your coil would be a foot long. I just looked it up to build a nickel coil with 26awg 2.5mm it would be 128 wraps.
hehehe can't imagine that at all ms Georgia!!peach is my favorite, so far.
((((((((((Yiddle))))))))))) good to see ya. But so sorry you're having issues with it. they seem to be either hit or miss. Lots of folks have no issues, but plenty have with the 50. I am with semi, tell you don't have the equipment to do that, and they need to replace it, or give you your money back.anybody get an eleaf iStick 50w that doesn't function properly?I'm so very disapponited....![]()
What is that and where did you get it. I've been looking for a good cherry.Don't know what it is, but it's pretty good. Strong cherry flavor:
5% Wild Cherry
2% Black Cherry
2% Coconut
I don't really taster the coconut though... Just a strong cherry.
he made it, but perhaps he'll chime in with which brand flavorings he used. Good cherry juices are hard to find.What is that and where did you get it. I've been looking for a good cherry.
Nice to meet you Mattiem. This ALL new to me. Haven't quite figured out what ration of pg/vg I want to vape. 50/50/ seemed to heavy on my lungs and 100% pg sputtered and spit and seemed to harsh. I got the hubby to do some calculations for me last night, so I'm trying 70/30 and 60/40 to see what I'm most comfortable withI'm a kid in the candy store with all the flavors, but whadda know...peach is my favorite, so far.
Yep....got it from a vendor. Had purchased one for a friend....he loves it....so I splurged on my birthday and got myself one. Charged it, put my atlantis on it and after about 5 puffs.....power low on screen. Thought perhaps the tank....changed to a nautilus.....changed the settings for that particular tank, and it was good...for that afternoon. battery icon showing at least 7/8 full, until I tried to use it again..... power low on screen and won't fire. Doesn't matter how long it's charged.....the icon goes off showing fully charged .....until I try to use it. Sometimes I can get 4 or 5 puffs before it stops working. Afraid to keep charging the battery, since it doesn't seem to do any good and I don't want the thing to explode.
Vendor is asking that I send a video of it before starting a return process. I have neither the equipment nor the knowledge to make a video and send it. Very sad, as I wasn't asking for a refund....just want to return this for one that works
You know the thing well one of the things I like so much about these SX's is their adjustability with nickel. If you don't feel like a strong vape you can turn down the Joules and the Temp to suit how you feel at that time. It's totally different then just turning up or down the watts. The adjustability is almost endless. If turning things down isn't enough you can go to soft mode and if you want a stronger vape without being hot you can turn the J up and add a little temp but not so much that you get a hot vape and still get a stronger flavor and probably TH if you use enough nic. I only use 2.5mg so the throat hit is not really there. They just never cease to amaze me. I think this thing is a real winner. Ordered some spare parts for my Kangers and with what I already have I can completely rebuild one if need be. The new air flow control has 2 air slots and I ordered a couple of those to check them out. If I wanted to I could change out all my STM with new air flow controls and would have 6 of the newest upgrade. I am still undecided about the Provari and the Kayfun. I rebuilt the KF last night and put my fave juice in it and nothing tastes like it does. I can come close with the Kanger with nickel but there is something about that KF K4 that intesifies the flavor so much. I am glad I went with the real thing. Plus the Provari with the upgrades will be not only an awesome looking unit it works perfectly with Kanthal. Not really powerful enough for some subohmers at 20w but for me fantatic. I can't wait to see how the feature is that you plug in the price of a pack of smokes and it tells you how much you are saving. Kinda cool if you ask me.
Don't know what it is, but it's pretty good. Strong cherry flavor:
5% Wild Cherry
2% Black Cherry
2% Coconut
I don't really taster the coconut though... Just a strong cherry.
What is that and where did you get it. I've been looking for a good cherry.
he made it, but perhaps he'll chime in with which brand flavorings he used. Good cherry juices are hard to find.
In order:Start counting your pennies, the Memorial Day 2015 sales section is live. Memorial Day 2015 Sales! | E-Cigarette Forum
Ken, Mike and David, thank you for the glue tips. Pretty much no way to come into contact with it. The “plastic” part is slightly long and curved so you’d pretty much have to swallow it to get into trouble. Don’t use it often and will hold it for a backup but hate to toss it.
At 2% and 5%, those can't be TFA flavors.
anybody get an eleaf iStick 50w that doesn't function properly?I'm so very disapponited....![]()
Oh no! What's going on with yours? While many folks have them and like them - it's not uncommon to hear about faulty ones.
Did you buy it from a vendor? Depending on vendor I'm hears anywhere from 30 to 90 day warranty periods.
In order:
Made it just today. I have a very hard time finding a cherry I like, and I actually like this one.
Yes, I made it myself.
You welcome for the glue tips. I break mine so often, they were starting to cost as much as a PV, until I looked up superglue as a possibility. I use gorilla brand myself.
And....
Yep. TFA. Not only is cherry hard to find, but most are so strong that putting even 10% overcharges like the dickins. I used to use 10% TFA for all my flavorings, but my tastebuds went on overdrive and I can tell within 2 days if something is about to spoil.
Now I start at 5% and work up if necessary.
And since you guessed it ms. Tutu, YOU get to name it!
I was thinking of something like cherry coconut, coconut cherry, or nutty cherry, but the coconut isn't really even there. It's a subtle flavor, and I think that having it in tames the black cherry.
The wild cherry is full swing tho.
Weren't you the one getting a 3D printer? I'm seeing more and more talk around ECF about 3D printing mods and ohm meters and such. This, as you can imagine, really made me sit up and take notice today. Love to see Iffy's face if he ran across this guy (and not eating jokes, please, Iffy). Titanium? Design your mod and print up an indestructible version. Injured sea turtle gets 3D printed jaw - BBC News Bust your drip tip, print a better one.