Temp control is not very consistent between devices. Like Busardo says temperature guessing but no burn your cotton.
And that is why I looked online for a good BP diet and followed it a bit. Doctors are just not concerned with older people getting higher BP... until it goes way too high and they can prescribe medications for it. So they can prescribe medications for the side-effects, so they can prescribe medications for the side effects of the medications for the first side effects.
Or $9.29 shipped on ebay.
IDK about those devices but I do know that the SXM is right on with nickel wire in nickel mode. I usually vape it at 390F but with Ti the Ti mode is off and have to use about 480F or use Ni mode and use the offset and set it for 260-280F I prefer the Ni mode no special reason because the vape is the same. The only ones I have heard of that come close with Ti are the ones that have a variable TCR like the DNA200 or Dicodes possibly the new SXML that is coming out not sure about that.As long as you have the right coil and mode set (TI or NI) on your EVIC or NI on your Sig whatever setting you end up with to be happy is normal. Sure you can have all kinds of swings like that.
Specifically though if you use and NI coil in Ti mode or vice versa things are more thrown off, but again you can usually manually adjust to satisfaction. Personally, I'd stick with the proper matched settings and crank it up until you are happy.
Hey Legs, how's my neighbor ... been spending a lot of time over at the Samaritan Hosp. (hubby)
Of all the Desert Ships out there, HS has the best.
yummyYou have good taste
) 
Ken, congrats on getting the BP down. Mine suddenly shot up to 180+ when I quit the nic completely. I had no clue it could do that over no nic at the time. There were other reasons too but when I added a bit of nic back into the mix several months later, the BP made a notable drop. Changed some other things and it's back into a more normal range.
Took a new bottle of nic out of the freezer and admired how clear it was two years after putting it in there. Didn't notice it was 100mg/ml instead of the usual 60mg/ml. Got the shakes (OMG, Parkinson's!), racing heart and other nic OD symptoms. Went on for several hours before I thought to check the bottle. Idiot. Driving all day tomorrow (well, hubby does most of the driving), towing my little van (so I have wheels), up to Lancaster PA (1 overnight, we won't make it all the way tomorrow), to set me up at the Doberman Pincer Nationals. Hubby will leave Sunday for Ohio to do the Golden Retriever National (over 1000 Goldens!!!). These are both usually good shows for us ($$$). I am the only leash vendor at the Dobes, and they like my stuff.We will meet up again on the following Sunday (Dobes takes 2 weekends the the week in between) to continue on to the next show in Howard County, MD.
Took Geordi to his first handling class tonight (preparation and training for the conformation ring to get his breed Championship). He (WE!!) need work, but I went with his breeder and got lots of good info and tips, along with things to work on. Have lots of friends at the Dobes, they will help me with the "exam", where the judge feels the dog and examines him. This includes making sure his parts are there..... OOOO, he needs work in that department.... I am in no rush to show him, he is going through the lanky, dorky stage, but ring experience is valuable. I have "finished" (earned Championships) on both my Tervs so far, so I know we will earn it, but want to do it better every time. It's been years since I was in the breed ring, and every dog is different. Just keep learning! Keeps me young (as the bones CCCCRRRREEEEAAAAKKK).
Gotta get a good nights sleep, long days ahead. See ya Sunday in the hangout!!! Along with the lanky, dorky boy and the beautiful girly (my avatar).
Who gives a crap which porch you posted it on. I'm tickled pink it was this one.
Loving the updates on Geordi and his private parts. 
Plus, you know, it wouldn't be the Front Porch without some good OT stuff. Hope your trip is the best ever.Slots, good to see you. Hope the nightmare is over soon with the best results. Miss you and your wisdom here. Take care.
What peanut butter do you use? The only one I tried is MBV, which a lot of people like but I didn't much care for it. It has a flavor/smell that reminds me of what I used to smell when cutting lots of stainless steel tubing many years ago. Oddly enough, the closest description I'd ever been able to come up with for that smell was "peanut butter", but it's not close enough to the real thing.
You mean VZ (Vaping Zone) rather than VG, right?
I only worried about it because when I normally take my BP, I will take it 4 times 5 min apart and take the average. It's a home BP, so you have to be careful not to mis-use it.
I also take my BP starting 15 min after work - same time each day - same position, etc.I only worried about it because when I normally take my BP, I will take it 4 times 5 min apart and take the average. It's a home BP, so you have to be careful not to mis-use it.
and now for something completely different from CAASA:
Yesterday, we sent out an email to the entire membership letting them know that this week, there were three opportunities for them to make a difference:
(1) participate in the HR 2058 Call to Action (http://cqrcengage.com/casaa/app/write-a-letter?0&engagementId=101154)
,
(2) make a comment on the Consumer Reports article (http://www.consumerreports.org/cro/health/e-cig-uspstf-advice), and
(3) make a comment on the FDA's advanced notice of proposed rulemaking regarding labeling and packaging (http://blog.casaa.org/2015/08/fda-call-to-action-submit-comments-on.html)
If you did not receive this email, please check your spam filter, and if the email is in there, mark it as not being spam to ensure that you will see future emails from CASAA. If you didn't receive the email and it's not in your spam filter, it is possible that you have either not signed up to be a CASAA member or you have done so but inadvertently opted out of receiving emails. Please go to http://cqrcengage.com/casaa/app/register?4&m=25306
and enter your information. Make sure to check the box that opts you in for emails.
Well then it is very possible that the TCR is off on yours too just like the SXM. YiHi failed to come out with a corrected update of the firmware to fix the problem instead they are coming out with a new mod. Mine in Ti mode seems to have to be set about 100 degrees higher and in Ni mode about 100 degrees lower then what you want, a temp around 400F but nickel wire is right on.
