Same here Janet. Sitting here watching TV I have six different flavors right beside me. Unlike smokes there is no way I could handle just one flavor of e-juice.
Older Folks and Vaping
- Thread starter txtumbleweed
- Start date
- th_trl_thread_readers 0
- Status
Same here Janet. Sitting here watching TV I have six different flavors right beside me. Unlike smokes there is no way I could handle just one flavor of e-juice.
Well I am going to call this one Peppermint Ice - I added a 4 drops of sweetner and a 2 drops of menthol (made from menthol crystals) in a 5ml mix and loaded up my mini vivi nova. Still not quite as good as the Dynominty I bought from the vendor I buy my premixed juice from up here - but getting close. So if anyone is interested - 12% TPA Peppermint, 2% menthol, 2% Koolada, 4% sweetner. I just checked and the vendor bought one is 100% VG and mine is 40pg/60vg so - that might make a difference 
@Fran - I actually loaded up a cart with flavors from two different vendors earlier - then chickened out. Figured I better get better at doing this with what I have right now - but it sure is tempting when I read about all the flavors you all are trying.
This is getting to be kind of fun
@Fran - I actually loaded up a cart with flavors from two different vendors earlier - then chickened out. Figured I better get better at doing this with what I have right now - but it sure is tempting when I read about all the flavors you all are trying.
This is getting to be kind of fun
I use distilled water all the time since I have a PG allergy. It works - just a few drops at a time, it doesn't take much.
I do about 15% in a 10 MIL juice of VG and it makes it thin enough to work. or I do a mix of PG and VG since I have no PG sensitivity.I use distilled water all the time since I have a PG allergy. It works - just a few drops at a time, it doesn't take much.
Fran, I've never used an 808Fusion, and have been very curious as I read so many folks are happy with them!
I've read that you love them so!
These are what they refer to as 'carto tanks? I've seen something similar at Ikenvape, but not sure........do they need an adapter for an Ego? I'm in an ordering kind of mood, so if you can direct me, I'm there! Can they be used with Volt cartos?
Gosh, I bring am extra battery with me just to go down the hall, just in case. If I'm going to have some "bathroom reading time", I bring extra flavors as well, LOL.
I have 5 or 6 different flavors I carry around So when I'm watching TV I have them in the rack my husband made for me I finally ordered some flavors from Vapor Zone and Ecigexpress today. Hopefully I got what I need to get my fav's DIY'd. Got some of the super concentrates from VZ, cause that seems like a really good way to go. I think almost everything I got was a concentrated flavor. I like mint flavors too and will try and get a really decent butter-mint mixed. A Cinnamon Danish, Hazelnut and coffee cause I like hazelnut coffee. A good cream to mix with the Kona Gloria sent me. And a Caramel Mocha flavor. Plus a Whiskey and an Irish Creme. I like whiskey and Irish Creme at 50/50...vape quite a lot of it. So hoping for the best.
So when I'm watching TV I have them in the rack my husband made for me I finally ordered some flavors from Vapor Zone and Ecigexpress today. Hopefully I got what I need to get my fav's DIY'd. Got some of the super concentrates from VZ, cause that seems like a really good way to go. I think almost everything I got was a concentrated flavor. I like mint flavors too and will try and get a really decent butter-mint mixed. A Cinnamon Danish, Hazelnut and coffee cause I like hazelnut coffee. A good cream to mix with the Kona Gloria sent me. And a Caramel Mocha flavor. Plus a Whiskey and an Irish Creme. I like whiskey and Irish Creme at 50/50...vape quite a lot of it. So hoping for the best.
You need a 510 to 801 sheath (thin) sealed adaptor. Use can use a fusion carto without a tank but I highly recommend using them in a tank. You need to slot or punch them for a tank or you can buy pre-punched. I use the standard length fusion (3.0). I just love them
You need a 510 to 801 sheath (thin) sealed adaptor. Use can use a fusion carto without a tank but I highly recommend using them in a tank. You need to slot or punch them for a tank or you can buy pre-punched. I use the standard length fusion (3.0). I just love them
Thank you, Fran!
I have Egos so would the 510 to 801 work with those..........and sorry for another question, but where do you buy yours?
Yes indeed it does. I think I got some from GV and MV. Most places have then but be sure to get the stealth ones (thin) and sealed.
You can get the Fusions and the stealth adapters at Ikenvape.
Fran, have you tried the 510 Fusions yet. When my 801 Fusions start running low, I'm going to order them and see how they compare.
I have Mike and they're very good. I prefer the 801 because the sealed adapters keep juice out of my pv's. And I'm no fan of 510's to begin with.
Thanks, again Fran! Will be sure to get the stealth thin ones.
Thanks Mike! Will look at MV and Ikenvape!
Just simply must have another new toy!
Thank Fran, that's good to know. I can deal with a drop or so of juice leaking out, I was looking to eliminate the gap under the tank with the Fusion's collar.
I have 5 or 6 different flavors I carry around
I received my first order from VZ about a week ago & fell into a HARD LOVE with 2 flavors in their super concentrated line. Their 'desert ship' & 'real cig' both tobacco flavors & the last ones that I thought I'd like, are so outstanding (IMO) that I immediately ordered large bottles of them. Good luck with your order...I believe you're going to be very happy. (sidenote) Menthol with everything......
Well as much as I would love to participate alot I won't be abel to. I only have 3 mods from Super-T which fulfill my needs completely. As atty I use only Genisis as that fits mt needs perfectly. I am getting the Talos which is based on the Genisis but I have not recieved it yet and it might take some time since it is from Germany. Will report back with that.
Other then that I am not very knowledgeable with all the other equipment.
Soooo....... carry on then
I have moved from "My 7's" and now have 2 900Mah eGo style batts with 2 tanks. These will do just fine. No need to go full bore with the latest gadget though I am sure the eGo VV were at one time the latest and I may upgrade to that when these batts die. I do not own an iPhone or Mac nor desire to. Same with vaping. I will use what meets my needs. Sure, one day I may have a ProVari but by then it will be old news.
73ckn797
I don't have the latest and greatest either. Can't see the real need since the Ego type I have have been doing me well. Since my batteries are getting aged I have replaced 3 with ego type again. I do have the ego VV and if I had it to do over again I would buy the Vision Spinner instead. Mainly because the Joye ego VV is too hard to read the Volts on.
I don't have the latest and greatest either. Can't see the real need since the Ego type I have have been doing me well. Since my batteries are getting aged I have replaced 3 with ego type again. I do have the ego VV and if I had it to do over again I would buy the Vision Spinner instead. Mainly because the Joye ego VV is too hard to read the Volts on.
Hey there 'Semi', do you remember way back to the end of last year when you and Janet both won free mod holders. Well they finally showed up last week and I got around to taking pictures. Thanks so much for PIF'ing your win to us. They're pretty nice and the crescent one is a nice size. I was concerned it would be to big - but nope it's fine. I went back and forth with the guy and got all custom holes in both stands. His stock layout and sizes just didn't work for me or Janet. Although When I spec'ed out Janet's she had a whole different collection - with her current stock, I may have to re-dill some of the holes. The bottom's and inside the holes for the PV's are 'flauxed'.
Janet's:
Mine:
Stands made by: renderwerks http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/331099-first-sale-exotic-wood-pv-accessory-holders-absolute-wood.html
Janet's:
Mine:
Stands made by: renderwerks http://www.e-cigarette-forum.com/forum/modder-accessories-supplier-forum/331099-first-sale-exotic-wood-pv-accessory-holders-absolute-wood.html
Last edited:
moishesmom.
I hope so on the VZ super concentrates. I don't do tobacco flavors though and gave up menthol long ago, but I do vape mint flavors at time
I hope so on the VZ super concentrates.
I don't do tobacco flavors though and gave up menthol long ago, but I do vape mint flavors at time
- Status
Similar threads
