On stockpiling after FDA deeming regulations

[GeorgeS]

When it comes to STM/TTM's, this what I've been buying: $8.29 Toptank Mini Styled Sub Ohm Tank Clearomizer - 4ml / 0.15ohm / stainless steel + glass at FastTech - Worldwide Free Shipping

Then matched up with these rba's: $15.85 Replacement RBA Coil Head for SUBTANK Mini Clearomizer (5-Pack) 5-pack - 0.2-1.5ohm at FastTech - Worldwide Free Shipping

I initially bought 5 but after putting 3 in service and liking them I purchased 5 more.

 

[mikepetro]

How did you fill it in? It wouldn't let me.

Download it, and then open in Excel or Google Sheets.

 

[retired1]

Or LibreOffice Calc.

 

[clnire]

You may also have to "unprotect" it.

 

[Sugar_and_Spice]

And for the tootle puffers, it can run on PT2 coils and Aspire BVC coils, the one's for the clearo's, not the nautilus ones.

the coil restricts the airflow for a perfect MTL experience.

Forgive my ignorance, but what is that white fitting on top of the coil?

 

[bnrkwest]

When it comes to STM/TTM's, this what I've been buying: $8.29 Toptank Mini Styled Sub Ohm Tank Clearomizer - 4ml / 0.15ohm / stainless steel + glass at FastTech - Worldwide Free Shipping

Then matched up with these RBA's: $15.85 Replacement RBA Coil Head for SUBTANK Mini Clearomizer (5-Pack) 5-pack - 0.2-1.5ohm at FastTech - Worldwide Free Shipping

I initially bought 5 but after putting 3 in service and liking them I purchased 5 more.

So the top fill aren't rebuildable? I was looking at them but wasn't sure

 

[ENAUD]

Forgive my ignorance, but what is that white fitting on top of the coil?

It's a top grommet from a PT2 head.

 

[dcdozer]

So the top fill aren't rebuildable? I was looking at them but wasn't sure

Topfill can use RBA and comes with one. But the chimney that comes with the RBA has a smaller hole, higher up. I assume this is to try to limit leakages that can happen from top filling.

 

[bnrkwest]

Thanks bought one to try!

 

[zoiDman]

Those would be a good idea to have around for those of us that are a bit older too. I sometimes wonder if I'll have the dexterity needed to wrap a coil as I get older. I think it might be a good idea to have a package of these in a selection of ohms you use for the just in case scenarios in life.

I think they are Nice to Have period.

I didn't Exactly dread making Coils. And using a Coil Winder, it wasn't exactly hard. But it kinda became Monotonous.

Those Coils cost about the Same as the Cost of the Wire. And each one is Untouched by Human Hands perfect. It's just so easy to have one of those 7 Day Pill organizers with different Gauge/Ohms coils for the different atty's is use.

I still wrap a Coil every once and awhile. But it is more when I'm Bored. Or on a Day like today that will be Too Hot to work on all those Outdoor Projects I have been putting off.

 

[dcdozer]

Thanks bought one to try!

My wife loves the toptank, but she uses stock coils. I prefer the original STM because of the RBA (don't like the higher hole on the TTM version), and it's .5 ML bigger. That said, I do sometimes use the TTM with the original RBA that ships with the STM, I just don't use the top fill feature when I do that. My wife top fills with the stock coils with no issue.

 

[zoiDman]

I think they are Nice to Have period.

I didn't Exactly dread making Coils. And using a Coil Winder, it wasn't exact hard. But it kinda became a Monotonous.

Those Coils cost about the Same as the Cost of the Wire. And each one is Untouched by Human Hands perfect. It's just so easy to have one of those 7 Day Pill organizers with different Gauge/Ohms coils for the different atty's is use.

I still wrap a Coil every once and awhile. But it is more when I'm Bored. Or on a Day like today that will be Too Hot to work on all those Outdoor Projects I have been putting off.

BTW - Buying Pre-Coils is also a Good Way to try out something other that Single Wire Coils.

For 2 or 3 Bucks you can pick up some Coils and then see if they Live Up to the Hype that sometimes surrounds them.

$2.08 Authentic MKWS Kanthal A1 Flat Twisted Pre-Coiled Wires for RBA Atomizers (10-Pack) 10-pack - 0.2mm*0.8mm*2 flat size / 0.36ohm at FastTech - Worldwide Free Shipping

$2.59 Authentic MKWS Kanthal A1 Juggeraut Pre-Coiled Wires for RBA Atomizers (10-Pack) - 28/32+28/32 AWG / 0.32/0.2+0.32/0.2mm dia. / 0.14*1mm flat size / 0.5ohm at FastTech - Worldwide Free Shipping

$2.12 Authentic MKWS Kanthal A1 Tiger Pre-Coiled Wires for RBA Atomizers (10-Pack) 10-pack - 26 AWG / 0.4mm dia. / 0.2mm*0.8mm flat / 0.36ohm at FastTech - Worldwide Free Shipping

$2.08 Authentic MKWS 316L Stainless Steel Quad Pre-Coiled Wires for RBA Atomizers (10-Pack) 10-pack - 28*4 AWG / 0.32mm*4 dia. / 0.2ohm at FastTech - Worldwide Free Shipping

 

[chanelvaps]

Is this a good RDA and is this a good price
http://www.vaporbeast.com/beautiful-sc201-aromamizer-rdta.html

 

[mikepetro]

Is this a good RDA and is this a good price
http://www.vaporbeast.com/beautiful-sc201-aromamizer-rdta.html

Great RDA, it is what I standardized on.

Not a bad price but I think there is a 20% off coupon code somewhere. I will look.

 

[mikepetro]

Sorry, only 15% off. Brings them down to $17

vapor beast has the aromamizer v2 in black 6ml for $19.97 - 15% code justadded = $16.97 and +$35 orders free shipping. I ordered a couple, and some 26g ni200 for $0.97/30ft

Steam Crave SC201 Aromamizer RDTA V2 | Clearomizers and Tanks | VaporBeast

This atty is all I have used for months, I bought 20 of them just to keep around, just in case.

 

[satchvai]

Just when I thought I was done, I just ordered 2 Merlins. One black and one SS. Vapemail addict here!

 

[bnrkwest]

Wrapping coils with coil maker seems really easy to me although had not done one yet LOL But it you make a bunch a head of time once you know what resistance you like that seems like a time saver.

 

[bnrkwest]

Just when I thought I was done, I just ordered 2 Merlins. One black and one SS. Vapemail addict here!

I know I am not saying I am done anymore because I keep buying stuff ! LOL

 

[dcdozer]

Wrapping coils with coil maker seems really easy to me although had not done one yet LOL But it you make a bunch a head of time once you know what resistance you like that seems like a time saver.

It is easy. Took me about 15 minutes to get it right - at first I kept applying too much pressure and the wire would wrap over itself. Just let the coil wrapper do the work for you and wrap away.

 

[JustWondering1]

Is Texas business friendly or SMALL business friendly? Critical difference. FDA is very business friendly. BT,BP...

LOL! I hear you. I'd say Texas is very friendly to small businesses, so I am hopeful it will stay that way. That doesn't mean I won't stockpile and prep, because of the FDA. I am feeling optimistic that the state of Texas won't make things worse for vaping than the FDA's Deeming already has.

On the negative side, I just checked to find out what kind of vaping climate exists in Mexico, thinking I could cross the border to buy vape supplies if needed. Unfortunately, I learned that Mexico is very unfriendly to vaping, so that doesn't appear to be a good option.