One down; two to go!

[Navy4life]

It's here, the VV Grand made it safely today! JC Okie, you must have ESP! The other one came while I was at work! So I'll have to go in late in the morning again! One thing, I had ordered some atomizers from EmpireMods. I know I ordered regular ones, but they sent me some with holes in it. I have some cartos on order (ressurectors), but they have not got here yet. Extra batteries came in today also.
I don't want to play with the RMA tonight and may wait till Friday or the weekend (unless curiosity takes control)! Anyway, I did order two atomizers from Rob, so I guess I'm not dead in the water. Quick question though, since you guys are masters of improvisation; could I wrap some teflon tape around the Empire atty holes and do some dripping? I just got some Ejuices from mount baker and don't want to commit a REO bottle until I taste them. Thanks, and I will send some pics. By the way, are there any instructions and or rules for PICS? If you don't see the one tonight, you'll see all three tomorrow night. Thanks again guys!

 

[nerak]

It's here, the VV Grand made it safely today! JC Okie, you must have ESP! The other one came while I was at work! So I'll have to go in late in the morning again! One thing, I had ordered some atomizers from EmpireMods. I know I ordered regular ones, but they sent me some with holes in it. I have some cartos on order (ressurectors), but they have not got here yet. Extra batteries came in today also.
I don't want to play with the RMA tonight and may wait till Friday or the weekend (unless curiosity takes control)! Anyway, I did order two atomizers from Rob, so I guess I'm not dead in the water. Quick question though, since you guys are masters of improvisation; could I wrap some teflon tape around the Empire atty holes and do some dripping? I just got some Ejuices from Mount Baker and don't want to commit a REO bottle until I taste them. Thanks, and I will send some pics. By the way, are there any instructions and or rules for PICS? If you don't see the one tonight, you'll see all three tomorrow night. Thanks again guys!

Glad the VV Grand is there!

You might be able to use toothpicks in the cartos holes. It might even work well enough for you to start squonking!

Pics? Well, usual stuff, no nudity and all that. LOL! Any pics of REO's are fine!

 

[JC Okie]

Put some duct tape or electrical tape over those holes and GO FOR IT. HOW could you even think about waiting???? By holes, you mean they've been punched for tanks, right? Anything will plug the holes enough to play with your REO.....as long as the attys/cartos have a hole in the bottom (unsealed.) Teflon tape (finally read your whole post!!??!!??) would work.

 

[Navy4life]

Yes JC Okie, they were pre punched, and I know I didn't order them as such! Hey JC Okie, thanks, you've been great.

 

[JC Okie]

Yes JC Okie, they were pre punched, and I know I didn't order them as such! Hey JC Okie, thanks, you've been great.

Thanks.

Believe it or not (you'll see....)....we get as excited about new people getting their REOs as you guys do. I couldn't wait to get home from work today to see what you had to say about your REO. We all know what the REOs have done for us. You said it was smaller than you expected....YES. We hear that a lot, too. Dynamite in a little package. The VV Grand (the one you got today) is my favorite REO, and it's what I use most of the time. I can't wait to hear (tomorrow night after work...LOL) what you have to say about the 2.1. Perfect little compact machine.

Be careful not to vape yourself into a nic coma. It's really easy to just vape and vape and vape.....it's so fun....and so good. When you get that RM2 coiled and cranked, it's going to even take it up another notch. A REO with an RM2 is the absolute, over-the-top best vape you'll ever have. Have fun and report in often!

 

[unloaded]

Are they attys or cartos? The only attys I've seen with holes are 901’s and they have different threading than the 510 on the Reo. If they are cartos with holes they are meant for a tank. I'd take an oring off a spare drip tip and roll it down to cover the holes, that should get you by until new ones arrive. Check and make sure they aren't getting too hot. It could just be a sign that you are meant to play with your RM2 sooner than later.

 

[Navy4life]

Are they attys or cartos? The only attys I've seen with holes are 901’s and they have different threading than the 510 on the Reo. If they are cartos with holes they are meant for a tank. I'd take an oring off a spare drip tip and roll it down to cover the holes, that should get you by until new ones arrive. Check and make sure they aren't getting too hot. It could just be a sign that you are meant to play with your RM2 sooner than later.

You sir are correct, I screwed up! Long story short; I did order two short attys from ROB. The other two from Empire, not only have the holes, but won't fit. They don't have a post, they have threads on the outside. What a shame. So I guess I'm going to have to play with the two short ones from Rob. It looks like I may be forced to build the RM2 sooner; than later. Dripping with the atty, is a new experience for me. This whole thing is new for me, but I'm loving it. I just wish I would have planned better for everything needed, or that everything would have arrived at the same time. I mean Rob's stuff got here so quick, everything else seems kind of slow, with the exception of my batteries. I am not going to give up! I am meant to be a REO man!