Oumier Wasp Nano BF Kit

[Frenkyou]

Oumier Wasp Nano Squonk Kit limited edition by Buybest

Oumier is most likely a name that many know about the Wasp Nano rda, Oumier thinking about the success of this popular atomizer he made the Oumier Wasp Nano Squonk kit, which incorporates the original Wasp rda concept and turns it into a complete squonk kit.
This device has no power control regulation and works only in mech mode, it is a squonk mod with direct output voltage, the power decreases with the dropping of the battery. It has a simple controller that does not allow trouble in case of cell reversal and a USB charging circuit. The chip has the ability to read the resistance of the installed coils and to make the device work at the one it considers to be the appropriate power. The advantage of this mechanical mode squonk is that it has integrated safety features, includes short circuit protection, overload protection, low voltage protection and protection against autofire (10s)

The packaging of the Oumier Wasp Nano Squonk Kit is offered in an elegant matt black background box, with embossed silver lettering and designs that are very shiny.
On the front of the box is depicted the Wasp Nano BF Mod, a small circle at the top right reminds us of the color we will find inside.
The rear area contains a vespa nano logo, physical address, website address, warnings and finally the usual logos & brands.

Later on we find indicated the contents of the kit, then the scratch and check and the bar code.

A view of the remaining sides.

What the mod looks like in the packaging.

The kit contains:
1-Wasp nano Bf mod
1-Wasp nano RDA
1-USB cable
1-Drip tip 510 in resin
1-Accessory package (coil, screwdriver, cotton and o'ring)
1-User manual
1-Card warnings
1-Packing box

Oumier Wasp Nano Squonk Kit Specifications
Dimensions: 99.6 mm x 25 mm x 48 mm
Battery: 1x 18650 cell (NOT included)
Maximum power: 80 W.
Voltage range: 3.2-4.2 V.
Resistance range: 0.15-3.0 ohms
USB port: 5 V / 1 A.
Mode: MECH mode
Protection: Reverse
Protection: Overtime 10s
Protection: Short Circuit
Protection: Low Voltage below 3.2V
Bottle capacity: 8.0 ml
Tank type: Single Coil RDA
Connection: 510

Operation Oumier Wasp Nano Squonk Kit

1-To vape, press the Fire button
2-To turn on / off the 5click mod and the LED will flash 3 times and light up green.
3-The LED always remains illuminated during vape.
4 - Unfortunately when the battery is inserted upside down the LED does not light up and the mod does not work
5-If an autofire occurs or we keep the fire pressed for more than 10s, the led will flash 8 times red interrupting the delivery.
6-In the event of a short circuit the LED flashes 3 times red without dispensing.
7-Below 3.2V the LED flashes 5 times without delivering.

Remaining charge indicator:
The LED is green when the charge is equal to or greater than 3.9V
The LED is blue when the remaining charge is between 3.6-3.9V
The LED is red when the remaining charge is less than 3.6V

Recharge: (always recommended) load the cells separately with an external charger
The LED flashes red when charging is at the beginning
The LED flashes green when the charge is equal to or greater than 4V
Led the LED stops flashing when the charge is over.

The upper part of the metal mod contains the battery cap marked by the indication of the negative (the positive is marked on the bottom) the cup with gold plated pin, allows to accommodate RDA up to 25mm without protrusions.

The front is a nice mix of materials, ie resin, metal, plastic and silicone, includes the fire button in plastic material, silent and of good precision, the door is in removable metal to access the silicon refill bottle.
The rear area proposes the combination of resin / metal, with the logo of the nano wasp placed at the top near the cap / battery.

 

[Frenkyou]

Here we can see the sturdy metal door of the refill, equipped with 4 powerful magnets that hold it firmly to the body of the mod. The super-soft silicone tank is equipped with a metal collar, a silicone straw and a threaded metal cap, can hold up to 8ml of liquid.

Here we see the metal fitting where the straw is inserted to bring the liquid to our RDA, this system has an excellent resistance to leaks, at least from new, for now.
Below we see the metal support area for the silicone bottle.

Wasp Nano RDA

When the original Wasp Nano RDA was released, it took some time before it gained popularity, certainly due to the low purchase price
soon his image appeared on all the social media and forums of the globe, what was read and seen was essentially that aromatically was one of the best RDAs ever produced, within a few weeks the request of Wasp Nano has grown out of all proportion.

In this version "resin limited edition" also appeared a nice drip / tip in the same color / material of the cap.
Note the small slotted screws and the depth of the deck.

The bottom of this RDA highlights the positive screw, the protruding BF pin (replaceable with full pin supplied in the kit), the Wasp Nano logo, the C E mark and the disposal logo.
Note the simple coil tightening system, the cotton feed holes and the o'ring for the resin cap.

Centering the coil is very simple, tightening the small screws a little less, cutting the excess legs is like drinking a glass of water.

Topping on this RDA is simple and always guarantees good nutrition even if you are not a Master Cotton graduate.

On the excellent aromatic yield of this Wasp Nano I will not dwell on it as rivers of words and dozens and dozens of pages have been spent on the various forums regarding the builds to do to have the maximum yield or to alleviate the classic hiss on aspiration.

There are three colors available for this Oumier Wasp Nano Squonk Kit limited edition.

Final considerations.

The Wasp Nano Squonk kit has an extraordinarily attractive appearance. It is available in three truly unique colors, with a snake skin pattern on the resin part, so well done that it almost feels like the reptile scales feel, the squonk system works really well, the bottle is soft to squeeze and sucks up to the last ml of liquid. Battery management is as good as the boost, the battery drop doesn't feel that much, at least with this Build! The LED with its indications is clearly visible and illuminates from inside the resin with a beautiful scenic effect, the protections are there.
At this point I wonder why this product has gone unnoticed enough, given the success that its RDA (Wasp Nano) had received!
I have used and use similar products like the squeeze or the dripmod but for me there is no comparison, if they told me to choose one, I would keep this all my life.

If you like the Oumier Wasp Nano Squonk Kit limited edition you can find it here Best Vape Shop Online & Small Consumer Electronics Online
Specifically choose the color here 80W Oumier Wasp Nano Squonk Kit - Green

I thank Buybest for sending this product for review.
-------------------------------------------------- ------------------------------