I just ran out of wick and I guess I am in a bit of a panic what am i going to do with out my ody and iatty's. I just would like to see if any has a source in Canada that I can order from ? Thanks Adam
Out of wick Please help! Need wick source Canada
- Thread starter AdamAnd
- Start date
- th_trl_thread_readers 0
- Status
Here you go I order from them the Nextel Wicks
XC-116-25
The model you need is XC-116 the 25 at end is how many feet.
Nextel Braided Ceramic Very High Temperature Sleeving
Make sure after you cut the amount of wick your going to use its torched to remove all chemicals etc before vaping. No different from sylica.
XC-116-25
The model you need is XC-116 the 25 at end is how many feet.
Nextel Braided Ceramic Very High Temperature Sleeving
Make sure after you cut the amount of wick your going to use its torched to remove all chemicals etc before vaping. No different from sylica.
Ya I ordered from them too. Make sure you order from omega.ca though as they will move your order from the .com to the .ca then complain and whine.
How does the Nextel compare to the stock wick guys? Is it a big upgrade or just something to use when CoV has none available?
I ran across this link earlier today. It's slightly more expensive than CoV at about $1/foot, but could be a good source when Bruce is out of stock
Products Page | Silica Wicks
Products Page | Silica Wicks
there is coupon code on the front
but i saw them on ebay also.. for international shipping
but i saw them on ebay also.. for international shipping
you can always use 100% cotton I use it in my ViVi Nova look here http://www.e-cigarette-forum.com/forum/modding-forum/284030-wick-materials-safe-vs-dangerous.html
Great advice guys I went to the site they also have XS silica sleeving avaiable should i order xs-116 (Silica- 1/16 inch diamater) or the XS-116 do you know if it is ROHS certified or not Thanks again I am looking for that info if i find out i will post here
Ok I already got a reply which is great If I can just get a little help making my decision is XS-116 what I should be ordering. Imeo I have the oppertunity to order this (Silica Sleeving 1.5 (1/16) Inside Diameter. 25 ft.) but they also offer Silica Sleeving 3.0 (1/8) Inside Diameter. 50 ft. and Silica Sleeving 6.0 (1/4) Inside Diameter. 100 ft. What do u recommend ? Thanks again everyone for pointing me in the right direction.
Omega Engineering Inc.
RoHS Compliance Determination
Part Number: XS-116-10
RoHS Status: COMPLIANT
Omega Engineering, Inc. is committed to complying with the European Union's Directives on the Restriction of Hazardous Substances (RoHS).
These regulations are effective as of July 1, 2006.
Omega Engineering Inc.
RoHS Compliance Determination
Part Number: XS-116-10
RoHS Status: COMPLIANT
Omega Engineering, Inc. is committed to complying with the European Union's Directives on the Restriction of Hazardous Substances (RoHS).
These regulations are effective as of July 1, 2006.
Other people have more experience on this Adam, so they will jumb in soon for you
Did they get some in stock yet? Last time yet got a wick/wire shipment, their website was crashing for 2 hours and then it was all gone.
yes that's the correct size. Remember when you cut the wick your going to use you will need to torch it prior of installing the coil. You want to burn all that crap off.
For more info you can look at MrKrinkle's post
http://www.e-cigarette-forum.com/forum/gg/311858-those-who-have-questions-about-nextel-wire.html
I wouldn't recommend the XS-116, it is expensive and does not work that good. When the original GG silica Wick is not available or when I am short of it I use 100% cotton yarn. Give it a try, it is very cheap (I bought here in Mexico 100% Canadian Cotton yarn for $7.00 USD).
http://www.e-cigarette-forum.com/fo...uestions-about-nextel-wire-2.html#post6684512
But personally, the original GG silica wick is the best one (and I have tried different wicks: mesh, nextel XS-116, cotton, etc.)
http://www.e-cigarette-forum.com/fo...uestions-about-nextel-wire-2.html#post6684512
But personally, the original GG silica wick is the best one (and I have tried different wicks: mesh, nextel XS-116, cotton, etc.)
I ordered Nextel. In Canada thy ship XS-116 which is silica, not ceramic. I used it for a couple of months but recently switched back to the 3mm official GG wick. I has a nasty taste as it breaks in (even if torched in advance) and the breakin period is half a tank.
- Status
