P3: Beta Tester Reviews
- Thread starter The Ocelot
- Start date
- th_trl_thread_readers 0
- Status
You mean like when it lights up - when my thumb is covering it? Not so much...
Could someone please pass the Gorgonzola?
Last edited:
There's all different kinds, of course...
The stuff my family got was brown, super creamy, really interesting burst of flavor to it...
It needs jelly.
Only the pink ones. But they are rather cantankerous when hot.
You think you got problems? Jeez Louise go take a look at what's being discussed in the 'dark fruit' bad analogy thread.
I'm helping that one go further awry.
Wha? By being on topic and talking about volts and watts and stuff? Without comparing anything to a Ford Fiesta? I see you dere...
I'm hoping the outer ring is just for the beta. With the way they have it set up that could change it very easily/cheaply to a taper or different design in the future.
And to get back on topic:
You guys crack me up!!!
And never being to person to be "on-topic", I'm changing it up a touch.
TO: The 22m Provaris don't look terrible with a ring & 19mm tank (see pic), but I prefer the tapered look with those.
Now, if you please, pass the cheese. Just don't CUT... (please).
I'm hoping the outer ring is just for the beta. With the way they have it set up that could change it very easily/cheaply to a taper or different design in the future.
And to get back on topic:
Ima dropping a dime on you right now to People for the Ethical Treatment of Abbaye du Mont des Cats.
Jaded ProVari user: I don't see anything in the P3 that my V2.5 can't do just as well.
ProVape: We're coming out with a Provarinati Edition P3.
Jaded ProVari user:
My thoughts exactly!!! (grin....)
I took a ProTank with me to try the P3 for just that reason. Not a good look.
Thank you for posting!!!!! I was hoping this thread would be a one stop for people look for reviews, but it appears my attempt at herding cats has failed...except for you. Meow
I put my review in the Official P3 thread so the ProVape peeps would see it. And in the ProVarinati thread, too.
I went to try the P3 today. It was hard to give it back. If you change your wattage or voltage often you will likely think it’s fiddlely. I rarely change settings so it’s good for me.
I took with me a Kayfun with a 1ohm coil. And a Nautilus and a ProTank2, each with a 1.8 ohm head. Had I not missed that part about an adjustable center pin I would have also taken my Magma. However, the owner of the store says the long 510 is no longer an issue.
I like the way it looks. It reminds me of the simple design of the v2 satin silver. The Made in US and ProVape engraving on the top cap is small and unobtrusive. I like that the extra sections are included to get all 3 sizes.
I figured out the menu after a minute or two of playing with it. The choice of button color is fun, and does not apply to the screen color. To change volts or wattage is a similar button press as before. It’s in -0.1 increments.
The boost feature was nice with the Kayfun. It fires high for a bit to heat the coil, then goes to what you set. With the 2.5 I have noticed the battery shows voltage drop immediately after it’s changed, and sometime lower ohmed coils are a bit wonky. Not so with the P3. I fired the 1ohm coil at 15w with no errors. And I like that the battery remaining shows on the screen.
The Nautilus did well too. And the ProTank2 was fine, too, but looks weird with the new endcap.
The only thing I did not play with is the Profiles. I would probably set 1 for each topper I typically use on it. My coils remain similar each time I build one or change a head. That would take care of some of the fiddling needed to choose one’s voltage or wattage.
Overall, I really like it and will be buying one.
I took with me a Kayfun with a 1ohm coil. And a Nautilus and a ProTank2, each with a 1.8 ohm head. Had I not missed that part about an adjustable center pin I would have also taken my Magma. However, the owner of the store says the long 510 is no longer an issue.
I like the way it looks. It reminds me of the simple design of the v2 satin silver. The Made in US and ProVape engraving on the top cap is small and unobtrusive. I like that the extra sections are included to get all 3 sizes.
I figured out the menu after a minute or two of playing with it. The choice of button color is fun, and does not apply to the screen color. To change volts or wattage is a similar button press as before. It’s in -0.1 increments.
The boost feature was nice with the Kayfun. It fires high for a bit to heat the coil, then goes to what you set. With the 2.5 I have noticed the battery shows voltage drop immediately after it’s changed, and sometime lower ohmed coils are a bit wonky. Not so with the P3. I fired the 1ohm coil at 15w with no errors. And I like that the battery remaining shows on the screen.
The Nautilus did well too. And the ProTank2 was fine, too, but looks weird with the new endcap.
The only thing I did not play with is the Profiles. I would probably set 1 for each topper I typically use on it. My coils remain similar each time I build one or change a head. That would take care of some of the fiddling needed to choose one’s voltage or wattage.
Overall, I really like it and will be buying one.
WHAT?!?!?!? Blasphemous...what's. ProVape have against the royal, awesome color of dark purple?
hey stranger! How u do'in?
Thanks for the reviews to those who have enlightened us. I think some of the new features sounds great. I like the flat top design, interchangeable battery options without all the extra end caps to buy, higher watts and lower ohms capabilities and more menu options.
Still not sure of the overall looks and the P3 logo is still not super eye catching. Plus now I'll think of PB&J or cheese since we seem to talk about cheese a lot (thanks Oz
) or a goat eating cheese or chunky Skippy. With that said, I think this mod would look awesome in a Stealth
- Status
